XTEMOS ELEMENT
AJAX PRODUCTS TABS
Digital Trainer Using NAND Gates
Complete with Regulated power supply of + 5V/500 mA. Provided with 4 Logic input switches (bounceless) 4 LED Indicators (Buffered)
Functional diagram of :-
1. 3 Input NAND 6 No.
2. 4 Input NAND 4 No.
3. 1 Input NOT Gates 4 No. is printed on board.
4. 12 Interconnection Leads and User’s Manual is provided.
Breeding Nest
Ripple Tank
Description :-
Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet.
The tank edges are shaped to minimize undesired reflections.
Tank has a drain hole closed by a rubber stopper.
With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height.
The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam.
The motor has an eccentric weight which causes the beam to oscillate.
Two point sources are provided by two plastic spheres, each mounted on a right angle rod.
A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant.
Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm.
Complete with following accessories :-
1. Two straight obstacles of aluminium alloy length 130 mm.
2. One straight obstacle length 40 mm.
3. One curved reflector radius 200 mm.
4. One trapezoidal plastic plate for refraction.
5. One wood hand wave roller.
6. One water dropper.
7. One pkt. rubber bands.
8. One foam plastic sponge.
9.One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod.
FISHER CLAMP (Burette Clamp)
PRODUCT DESCRIPTION
These Clamps are moulded in Polypropylene making it completely
corrosion-proof. The spring loaded jack in themiddle provides a vice likegrip to the Burette and prevents it from slipping. Two tapered wedges areprovided to ensure firm grip on rods having dia 3/8” or 1/2”.
Available in 2types:
- Single
- double
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
DC Network Analyzer
Specification
• Here we provide the bi-polar Transmission Line. • Simulated long, medium & short distribution lines selectable by patching in various length of DC Transmission line • Two no of bi-polar DC generator sources with ON/OFF control and voltage regulator potentiometer. - Two wire or Three wire Transmission Line operated in +12V DC - Each DC generator are independently control by potentiometer. • 2 digital voltmeters and ammeters provided in the input side and 2 digital volt meters and ammeters are provided in the output side • of transmission line to read the input & output parameters of transmission line. • One no of microcontroller based measuring system provide to read the input and output parameters. • 4 nos of digital ammeters provided to read the load current • 4 nos of resistive load and 4 nos of lamp loads are provided to load the transmission line.
Coil Condensers , Graham, Jacket Distillate Type
Brush, Semi Micro
Airway Intubation Model
Description
The Difficult Airway Management Simulator offers a realistic airway management training with 24 various difficulty levels including 3 different mouth openings, 2 neck flexibility options, 2 positions for the vocal codes and an inflatable tongue.Training Skills:
Airway opening techniques (head tilt, jaw thrust) Bag-Valve-Mask ventilation Pre intubation airway assessment "Sniffing position" Pressurization of external larynx to improve the laryngeal view Intraoral/intranasal intubation Use of oropharyngeal airway (OPA) Use of nasopharyngeal airway (NPA) Use of laryngeal mask airway Use of video laryngeal scope Use of tracheal intubation scope Confirmation of successful ventilation by thoracic and abdominal movement Feedbacks on incorrect procedures including esophagus intubation and unilateral intubation Securing the tube in place with tapes or Thomas endotracheal tube holderTraining Model Includes:
1 manikin 3 upper incisions 1 lubricant 1 50ml syringe Size: 27.6 x 15.4 x 9.9 inRecommended Equipment:
Macintosh laryngoscope: blade size 3, 4 Tracheal tube: internal diameter 7.0-7.5mm Laryngeal mask Air-Q: size 3.5 LMA supreme: size 4 I-gel: size 4XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Stefan Boltzmans Apparatus
The Stefan Boltzmann constant is an important constant in heat transfer. The apparatus determines Stefan Boltzmann constant. The apparatus consists of a hemisphere surrounded by hot water. Hot water is obtained from a water-heating tank. When the blackened disc is inserted at the center of hemisphere, heat is transferred into the disc from hemisphere by radiation and its temperature begins to rise, and from temperature raise rate. (It is measured at the intervals of 5 sec.) Stefan Boltzmann constant is determined.
SPECIFICATIONS:
Water heating tank provided with electric immersion heater. Hemisphere made of copper sheet, 200mm. dia. Surrounded water jacket of 250mm. Dia. Test disc made of copper 20mm. dia. provided with thermocouple at the center. Multichannel digital temperature indicator 0-200 C with 0.1C least counts to measure the temperature of hemisphere and disc. Audible buzzer with timer to ring at every 5 seconds. A technical manual accompanies the unit.SERVICES REQUIRED:
1.Bench area of about 1m. x 05m. at working height. 2.230v, 15A, AC, electric supply with earthing connection
Adjustable Tuning Fork
Crucible Support Stand
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Corner Cube Reflector
Description
To demonstrate principles of light and reflection, The reflector features three front-surfaced triangular mirrors mounted at right angles to one another on a hardwood base. Light beams hitting any of the mirrors from any angle are bounced off the other two mirrors and reflected back in the same direction they came from. With instructions.
Pulse Code Modulation/Demodulation
FEATURES:
• In-built sine wave generator • Test points to study different waveforms • In-built DC Power supplyTechnical Specifications:
• Sine wave Generator : Frequency : 1 KHz, Amplitude : 0 to 3Vpp • DC Voltage : -1.5 V to +1.5V • Clock Generator : Crystal based, 4.096MHz • Data rate : 64 kbps (for 8 KHz sampling rate)128kbps (for 16 KHz sampling rate) • ADC and DAC bits : 8 • Demodulator filter type : Butterworth low pass filter • Filter type : 6th • Filter cut-off frequency : 3.4 KHz • Mic Pre-amplifier : Transistor based • Compandingrange : -80dBm to +20dbm • Switched faults : 4 • Test points : 35 • Fuse : 30V, 100mV • DC Supply : ±5V, ±12V • System Bandwidth : 3.4 KHz
Tuning Forks
Impact Of Jet On Vanes Apparatus
DESCRIPTION:-
The Set-up consists of two sided clear fabrication. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan until the mark on the weight pan corresponds with the level gauge. A total of two targets are provided a flat plat and a hemispherical cup.EXPERIMENTS:-
Ø To measure the force developed by a jet of water impinging upon a different targets (Hemispherical & Flat Plate) and comparison with the forces predicted by the momentum theory.UTILITIES REQUIRED: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATION: –
Ø Test Plates : Material Brass (2 Nos.) 1. Flat Plate 2. Hemispherical Cup Ø Nozzle : Material Brass Ø Stainless Steel Chamber : Having of opposite sides made of glass Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank with Piezometer,Capacity 40 Ltrs. Ø Sump Tank : Capacity 60 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted StructureXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Model of Compound Microscope (BI STU)
Magnifier, Reading Glass
Two Hinged Arch Apparatus
DESCRIPTION:
The two hinged arch is a statically indeterminate structure of the first degree. The horizontal thrust is the redundant reaction and is obtained y the use of strain energy methods. Two hinged arch is made determinate by treating it as a simply supported curved beam and horizontal thrust as a redundant reaction.EXPERIMENT:
• To study experimentally a two hinged arch for the horizontal displacement of the roller end for a given system of loading and to compare the same with those obtained analytically. • To obtain the influence line ordinates for horizontal thrust experimentally in a two hinged arch by moving a load along the span and to compare the same with those obtained theoretically.TECHNICAL SPECIFICATION:
• Apparatus has a span of 100cm and rise 25cm. • Both ends should have hinge but one of the ends should also be free to move longitudinally. • A lever arrangement fitted at this end for the application of known horizontal inward force for measuring the horizontal thrust. Along the horizontal span of the arch various points are marked at equidistant for the application of load. • This being a statically indeterminate structure of the first degree. • A dial gauge with 25mm travel (with magnetic base) is to be supplied with the apparatus. • Mild steel apparatus complete with a supporting stand and a set of weights.
Kidney Section, Nephrons , Blood Vessels And Renal Corpuscle
Description
Set of three models on one board. Kidney section, 3 times full size. Nephrons and blood vessels 120 times full size showing a section through renal cortex and medulla. Malpighian corpuscle of kidney,700 times enlarged showing an opened Malpighian corpuscle with glamerules and Bowman’s capsule. On base with key card.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Full Functional Elderly Nursing Manikin
Description
Designed according to the demand of the clinical principles and the guidelines of nursing training. This multifunctional simulator could simulate an actual circumstance for practice. Multiple functions, rural practice, easy assembly, well shaped appearance and correct anatomical landmarks provides a very good training for practice.Features:
Head Care Body care Patient moving Different lying pose Bilateral and Unilateral oxygen inhalation Atomization inhalation therapy Nasal Feeding Gastric lavage training Intravenous Injection Intramuscular Injection Hypodermic Injection Various fistula orifice washing practice Female Catheterization Female Bladder Washing Enema Treatment Simulator Assembly
Decade Inductance Box – 7 Dial
Description
Housed in a box with seven dials and fitted with 4 mm output plugs, the unit allows a range of inductances from 1ΩH to 10ΩH. 7 Decade Inductance Box (i) 1ΩH to 10ΩH in steps of 1ΩH (ii) 10ΩH to 100ΩH in steps of 10ΩH (iii) 100ΩH to 1mH in steps of 100ΩH (iv) 1mH to 10mH in steps of 1mH (v) 10mH to 100mH in steps of 10mH (vi) 100mH to 1mH in steps of 100mH (vii) 1mH to 10mH in steps of 1mH
Bacteriological Incubator
Specification
Standard Double Wall Fabrication, inner & outer chamber made of thick mild steel sheet. Painted with hammer tone paint finish. The gap between the walls is fitted with special grade glass wool. Provided with two or three removable shelves. Heating elements provided on three sides to attain quick and uniform heating in range of 30°C to 110°C + 1°C controlled by hydraulic type capillary thermostat. An L- Shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.Optional
Air circulating fan. Timer 0-24 hours.| Chamber Size In mms | Chamber Size | Cap. (App.) |
|---|---|---|
| 300x300x300 | (12"x12"x12") | 28L |
| 350x350x350 | (14"x14"x14") | 45L |
| 400x400x400 | (16"x16"x16") | 65L |
| 450x450x450 | (18"x18"x18") | 95L |
| 600x450x450 | (24"x18"x18") | 125L |
| 600x600x600 | (24"x24"x24") | 224L |
Slide Storage Rack
We are engaged in providing Slide Storage Rack can hold 100 slides which are recognizable through the numeric indexing.
Spacing between the slots provides adequate backward & forward movement of slides for convenient recognition.
Made of ABS, the transparent cover provides excellent view of the slides stored inside.
Material : Acrylonitrile Butadiene Styrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Slide Storage Rack - 100 Slides | 6 | |
| Float Rack | 12 |
