XTEMOS ELEMENT
AJAX PRODUCTS TABS
Constant Volume Air Thermometer
Description
A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod. An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions. With U-shaped base. Complete with 1 meter rubber tubing to connect reservoir to the bulb. Supplied without mercury.
Air Conditioning Trainer General Cycle Type
The unit consists of ducting fitted with various air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is provided. Cooling circuit consists of a hermetic compressor; air cooled condenser, thermostatic expansion valve and evaporator (i.e. cooling coil). Measurements of various parameters Torn cooling cycle and heating cycle are provided and students can easily visualize and understand the basic principles of air conditioning.
SPECIFICATIONS:
1.Cooling circuits – It consists of: a) Hermetic compressor, having the capacity of 2/3 ton of refrigeration (approx.) using R-22 refrigerant. b) Rotameter for liquid refrigerant flow measurement. c) Pressure gauges for high and low pressure. d) Prescott (i.e. high and low pressure cut-out). e) Thermometers for temperature measurement at various points In the cycle. f) Energymeter for compressor input measurement. g) Condensate measuring arrangement. 2.Heating Circuit – Air heaters with input control provided with energymeter for input measurement. Maximum heating capacity 1 Kw. 3.Steam generator and injector for humidification of air. All above components are connected to a duct of size 200mm. X 200mm. in which airflow is generated by axial flow fan. 4.Anemometer for measurement of air velocity, (range 0-15 m/sec. Following experiments can be conducted on the unit a) Cooling of atmospheric air. b) Heating of atmospheric air. c) Humidification of atmospheric air. d) Dehumidification and heating of atmospheric air. (Cooling coil acts as dehumidifier at reduced airflow.)SERVICES REQUIRED:
1.440 V, 15 A, 3 Phase supply with earthing connection. 2.Floor space area about 3 m. X 2 m.
Tubing, Silicon
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
IoT Gateways
Typical Plant Cell
Microwave Integrated Circuit Trainer
This trainer is used to study Microstrip components and its characteristics. A useful trainer to get hands on experience on Microstrip components and instrument. We offer Three solutions.
1GHz RF Source with Detector
• Frequency Range : 0.05 to 1GHz. • Resolution : 100KHz. • Automatic Level Control (ALC) RF Detecter& Directional coupler provided for many RF measurements. • Output Impedance : 50 Ohm.1GHz Micro Strip Component
• Ring Resonator. • 3dB Power divider. • Direction of Coupler.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Bridge Rectifier
Bridge Rectifier is made of four diodes connected in a bridge circuit. It is housed in a plastic moulded box. This bridge rectifier converts alternating current (AC) into direct current (DC). It provides the same output polarity for either input polarity. All the electronic devices require direct current, so bridge rectifiers are used inside the power supplies of almost all electronic equipment. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
CALCIUM CHLORIDE TOWER 250ML
Orbital Shaking Incubator
Specification
Outer made of M.S. Sheet powder coated & inner chamber is made of thick S.S. Sheet. The gap between two walls is fitted with high grade glass wool. The glass window makes it possible to inspect specimen without disturbing inner Temperature. The unit has a temprature range from ambient to 60°. Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator Cum Controller with a accuracy of + 0.5°C. Air Circulation Fan is provided to maintain stability throughout. Speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S. Sheet with Lotus type clamps to hold flasks. Unit is fitted with Digital RPM Meter, 999 min digital time.Optional Accessories
Timer 0-24 Hours. 16 Flasks of 100ml. instead of 9 flasks of 250ml. 9 Flasks of 500ml or 25 flasks of 100ml instead of 16 flasks of 250ml. 25 Flasks of 250ml or 36 flasks of 100ml instead of 16 flasks of 500ml.Size
9 Flasks of 250ml. 16 Flasks of 250ml. 16 Flasks of 500ml.
Peripherally Inserted Central Catheter
Description
The model is suitable for central venipuncture of internal carotid vein and subclavical vein and peripheric venipuncture (arm veins) of cephalic vein. The cervical veins and arm veins can be filled with simulative blood.Features:
The model is a simulative right half of adult torso with right arm. There are apparent anatomical marks: clavicle suprasternal notch, stenocleidomastoid muscle, pectoralis major muscle, ribs and deltoid muscle. Lifelike veins: Superior vena cava, internal jugular vein, subclavical vein, cephalic vein, basilic vein and median cubital vein etc. With apparent anatomical marks, the model can be used to train puncture and catheterization of internal carotid vein, subclavical vein, cephalic vein and heart catheterization. The skin and veins can be replaced, Students will feel an apparent “POP” when puncture needle has been thrust into the veins. The heart floating swan-ganz intubation can be exercisedXTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Differential Gear Assembly Actual Cut Section
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Laboratory Timer
This is a versatile timer quartz crystal controlled for very high accuracy.
which can be used for conducting experiments related to timing and motion with high accuracy.
Can be used for G by free fall liner air tracks, dynamic trolleys etc.
This timer has an in built power supply for the coil for G by free fall apparatus and lamps for photo gates.
Range : 0.001, 0.01, 0.1 Sec.
The above timer has a built in power source for photo gates and the coil for 'G' by free fall apparatus.
Hook’s Law Apparatus
Vertebrate Embryology Amphibia
| Ovary TS Showing Oogenesis | Testis TS Showing Spermatgenesis |
| Egg VS | Egg VS with Early Cleavage stages |
| (2, 4, 8, 16 and 32) celled stage | Egg VS Late Cleavage Stage |
| Morula VS | Early Gastrula VS |
| Gastrula VS (Yolk Plug Stage) | Neurula CS Neural Plate Stage |
| Neurula CS Neural Fold Stage | Neurula CS Neural Tube Stage Tadpole 4mm. MLS, WM |
| Tadpole 7 mm MLS | Tadpole 10mm MLS |
| Tadpole Eye Region TS | Tadpole Trunk Region TS |
| Tadpole Trunk Region TS | Tadpole External Gill Region TS |
| Tadpole Internal Gill Region TS | Tadpole Heart Region TS |
| Tadpole Head Region TS | Tadpole Tail Region TS |
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Meiotic Cell Division
Leaf Area Meter
Description
Leaf Area Meter We have been affianced in offering an exclusive collection of Leaf Area Meter which is used to obtain measurements of leaf area without detaching the leaf from the plant. The offered meter is manufactured with the use of high grade components and latest tools in order to meet the set industry standards. These are extensively used for conducting various tests and studies on the leaves of a tree.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Multi Stage Centrifugal Pump Test Setup
DESCRIPTION:
The Set-up is designed to study the performance of Multi Stage Centrifugal Pump. The Set-up consists of a Multi Stage Centrifugal Pump coupled with DC motor & drive, supply tank, measuring tank & pipe fittings for closed loop water circulation. There are 2 separate pumps connected to DC Motor and drive and can be connected in series and parallel to stimulate different combinations. Pressure and Vacuum Gauge are connected on delivery and suction side of each pump for the purpose of measurement. Swinging Field Dynamometer arrangement for direct torque measurement using dial type spring balance is made for individual pump. The flow rate of water is measured using measuring tank and stop watch provided.EXPERIMENTS:
1.Speed Vs Discharge 2.Head Vs Discharge at various speeds 3.Efficiency curves at various speed and headsFEATURES:
1.Closed loop water circulation 2.Compact & stand alone set-up 3.MS Excel sample calculation program on demand 4.Stainless Steel tanks and wetted parts 5.Superb painted structure 6.Simple to Operate & MaintainUTILITIES REQUIRED:
1.Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC), 5 A, three pin socket with switch for pump. 2.Water Supply: Tap water connection ½” BSP. Distilled water @ 80 Ltrs. (Optional extra cost)TECHNICAL SPECIFICATIONS:
1.Pump (2 Nos.) : Kirloskar, Capacity 1 HP Speed 2800 RPM (max.) Head 12 m (max.) 2.Drive : DC Drive along with non-contact type Digital RPM Indicator 3.Supply Tank : Capacity 150 Ltrs. 4.Measuring Tank : Capacity 100 Ltrs. fitted with Piezometer Tube & Scale 5.Piping : GI / PVC 6.Stop Watch : Electronic 7.Control Panel : With required electrical instrumentation The whole Set-up is well designed and arranged in a good quality painted structure.
CNC Lathe Trainer2
CONTROLLER:
SIEMENS / FANUC Main Spindle Drive : AC Motor with VFC Z and X Drives : Stepper drive with Servo Motor Input to Servo : Optically lsolated Motor Drive : Smart & Intelligent Run Speed Control : Through Controller Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : ProvidedMACHINE DETAILS:
Center Height : 150mm Swing over Carriage : 125mm Distance between Centre : 825mm Weight : 1100kg Dimension in mm : 2000 x 1200 x 1700 Rapid Travel : 5000mm/min Resolution Z Axis : 1 micron Resolution X Axis : 1 micron (Dia.) Automatic Lubrication : Provided Tool Changer : Automatic – 4 station SPINDLE Spindle Speed : Continuous Variable Spindle power : 3 HP Inside Taper : MT4 Speed Range : 50 to 1800 RPMAXIS TRAVEL:
X Axos : 120mm Z Axis : 800mm
