XTEMOS ELEMENT
AJAX PRODUCTS TABS
Soil Auger, Helical
Digital / Analog Training System
Solderless Breadboard has 1680 tie points. Provided with 2 Terminal strips and 4 Distribution strips. Built in DC Regulated Power Supply. DC Supply ± 5V/ 1 Amp. 0 to ± 15V DC (Variable), 1 Amp. Built-in Function Generator. . Waveform : Sine, Square and Triangle (with selector switch),
Frequency : 1 – 100 Hz Variable
Amplitude : Variable up to 10 V, TTL 5V p-p
Data Switches (Bounceless) – 8 No.
LED Display (buffered) – 10 No.
Clock Pulsar – 2 No.
Seven Segment Display with Decoder IC 7447 – 2 No.
Speaker 2.5 Dia. with sockets – 1 No.
BNC Plug with 2 mm Sockets – 2 No.
4 mm socket connected with 2 mm sockets – 2 No.
Interconnection leads having 2 mm plugs at one end – 10 No.
Interconnection leads having 4 mm plugs at both end – 10 No.
22 SWG Hook Up Wire of 20 cm length – 100 No.
Comprehensive User’s Manual – 1 No.
Input 220 V, 50 Hz. AC with On/Off indicator.
Projection Microscope
Specifications
Projection Microscope is a dual purpose instrument which is equipped with the halogen projection bulb that works efficiently on the power supply of 220AC. The device is fitted with the highly effective cooling fan inside the instrument. The device is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. The instrument is supplied complete with the vinyl cover in a packing of a cardboard box. It is easy to operate instrument that offers highly accurate test results. The instrument provides high-quality and clear images. The instrument is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. It is a dual purpose instrument which is equipped with the halogen projection bulb. The works efficiently on the power supply of 220AC. The device is assembled with the effective cooling fan inside the instrument.
Rotary Pipette Stand
Moulded in Polypropylene, the unique Rotary Pipette Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette.
The lower rotating disc has four concentric troughs with tapered sides and open bottoms that cradle the pipette tips protectively and permit water drops to run off.
The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical.
Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring.
Our Rotary Pipette Stand can be easily disassembled and reassembled.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Pipette Stand (Rotary) - For 94 pipettes | 1 | |
| Pipette Box | 4 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Smart Energy Meter
A Smart Energy Meter based on Analog Devices IC has been developed to build an Advanced Metering Infrastructure (AMI). The AMI system facilitates networking capability via GSM, ZigBee and ModBus. A Smart Energy Meter Development system has been developed by us, which consists of 1φ/3φ measurement section, a 32-bit ARM controller, wireless modules and powerful software. The student can completely understand the concept and usage of this trainer. This can be also used as one of the IOT server node.
Features
• 3 Phase energy readings displayed in the Graphics LCD • Simple design, Efficient and Highly Accurate • Easy connectivity for various loads • Keys to change the settings • Supports GSM, ZigBee and ModBus for networking • LPC2148 based processing board • 32/16 bit ARM7TDMI-S CPU with 60MHz maximum CPU clock • On board peripherals for extension • Graphics LCD interfaced to display the energy readings • Keys for various settings • Current Sensors and Voltage Sensors provided to measure 3 phase voltages and currents • Polyphase energy metering IC provides highly accurate energy measurement • Energy metering IC interfaced via I2C with Controller module • CC2530 Controller with maximum 32MHz CPU clock • High-speed and low-power 8051 CPU • 2.5GHz IEEE 802.15.4 compliant RF transceiver upto 250kbps data rate • UART Connectivity to interface with CPU
Frequency Shift Keying Modulation And Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Frequency Shift Keying Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Embryonic Development (Period Of Gestation)
Description
A set of nine detailed models, mounted on stands, showing the following stages: An Embryo About 6 Days Old, Considerably Enlarged. Uterus With The Embryo In 1st Month Of Gestation. Uterus With The Embryo In 3rd Month Of Gestation. Uterus With Foetus In 4th Month. Uterus With Foetus, Placenta And Umbilicle Cord. Uterus With Foetus In 5th Month. Uterus With Foetus In 7th Month Of Pregnancy. Uterus With Foetus In 8th Month Of Pregnancy. Uterus With Foetus In 9th Month Of Pregnancy. Complete With Key Cards.
Turbo Charger Actual Cut Section
The working of turbo charger is shown with the help of actual parts assembled on iron base. All the necessary parts of turbo charger are shown in actual working form. This model helps the student to understand the working of the turbo charger very easily. It is specially made dissectible for demonstration purposes.
Double Shoe Brake Working Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
MCT Twin Rack
We provide Twin Purpose MCT Twin Racks for both 0.5 & ml. & 1.5 ml. micro centrifuge tubes.
Each side has 108 holes for 0.5 & 1.5 ml. MCT's respectively.
The transparent top of MCT Twin Rack provides and excellent view and a protection cover for the tubes stored.
Each face of the base has a unique alpha-numeric index for easy identification of the tube.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| MCT Twin Rack (Rack for 0.5 ml & 1.5 ml MCTS) | 4 | |
| MCT Box (Rack for 100 MCTs of 0.5 ml) | 4 | |
| MCT Box (Rack for 64 MCTs of 1.5 ml) | 4 |
Model of Galilean Telescope
Humidifier
Description
Humidifier based on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation. To work on 220/230 volts A.C. supplyXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Test Tube Stand of 6 Holes, Wooden
Description
With vertical pins:
Wooden, polished stand with drilled holes, 2 of 25 mm dia. and 4 of 20 mm to accommodate 6 tubes with overall height of 9 cm and length of 20 cm. Vertical pins are provided for quick drying of the test tubes. Also available for 12 tubes, with 2 holes of 25 mm dia and 10 holes of 20 mm dia.Specifications :
Length : (in) 9.4 Width : (in) 3.5Without vertical pins and moulded supports:
Wooden with base and top with single row of 6 holes, clips together quickly and easily with two moulded supports. Height 11cm can accept two tubes of 30 mm and four tubes of 20mm diaSpecifications:
Length: (in)11.8 Width: (in)10.2Without vertical pins:
Wooden test tube stand - 6 holes of 22 mm dia. Test stand measures 9.5" long 2.5" wide base and 4.5" tall (Test tubes not included - shown for demostration )Specifications :
Weight: (lb)0.9 Length: (in)10.0
Study Of Pipe Fitting
DESCRIPTION:-
The Set-up consists of a ½ bend and elbow, a sudden expansion & sudden contraction fitting from 15 mm to 25 mm, ball valve and gate valve. Pressure tapings are provided at inlet and outlet of these fittings under test. A differential manometer fitted in the line gives pressure loss of individual fitting. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.EXPERIMENTS:-
Ø To determine loss of head in the fitting at various water flow rates. Ø To measure the loss co-efficient for the pipe fittings.UTILITIES REQUIRED: –
Ø Water Supply and Drain Ø Electricity Supply: Single Phase, 220 V AC, 0.5 kW.TECHNICAL SPECIFICATION: –
Ø Sudden Enlargement : From 15 mm to 25 mm Ø Sudden Contraction : From 25 mm to 15 mm Ø Bend : ½ Ø Elbow : ½ Ø Ball Valve : ½ Ø Gate Valve : ½ Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank with Piezometer, Capacity 25 Ltrs. Ø Sump Tank : Capacity 50 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. The whole Set-up is well designed and arranged in a good quality painted Structure
Carburetors Actual Cut Section
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Fuel Supply System Diesel CRDI Type
Fuel Supply System Diesel CRDI Type (Actual Working Model) Common Rail Direct Injection.
This is an actual working model of fuel supply system of a CRDI diesel engine. The parts details is as under ::
This is an actual working model of fuel supply system of a MPFI petrol engine. The parts details is as under ::
1. Fuel Tank
2. Fuel Filter
3. Motorised Fuel Pump
4. Pressure Gauge
5. Fuel Rail
6. Fuel Injectors
7. ECU
8. Power Supply
9. Fuel Gauge & Control Panel
This model helps the student to understand about the parts & working of CRDI system. It is specially designed for demonstration purposes. The model will be supplied with key card & very interesting literature regarding working.
Optical Auto Engineers Level
Features
• Excellent shockproof function. • Exclusive closed magnetic field, magnetically-dampened compensator. • Friction-braked rotation and endless horizontal drive. • Prism for viewing circular vial. • Water, dust and dirt proof. • Comes with a years warranty. • Full back up and repair service available.
Cam Analysis Apparatus
The apparatus is designed to study the cam profiles and performance of cam and follower system. The apparatus consists of a shaft supported by ball bearings upon which three different types of cams can be mounted.
The push rod for follower is supported vertically, which can adopt three different types of followers. Cams and followers can be changed easily. A variable speed motor rotates the cam. A dial gauge permits plotting of follower displacement with respect to cam position. By operating the system at different Speeds, jump speed can be found and also the effect of weight and spring force on jump speed can be studied. Jump can be visualized also with the help of stroboscope (it is not supplied With the product).
SPECIFICATIONS OF CAM ANALYSIS APPARATUS:
1.Cam -Eccentric, tangent and circular ARC type – one each. 2.Follower- mushroom, flat faced and roller type – one each. 3.Cams and followers are hardened to reduce wear of the surfaces. 4.Variable speed motor coupled to camshaft of suitable range and Variac. 5.A dial gauge to note the follower displacement. 6.A technical manual accompanies the equipment.SERVICES REQUIRE FOR CAM ANALYSIS APPARATUS:
1.230 V, A.C. stabilized supply along with earthing connection. 2.Bench area 0.5m x 0.5m x 0.5m height. 3.Tachometer to measure the jumping speed, (can be supplied extra)
Car Chassis Rear Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM:It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
3Ø – 3Ø Matrix Converter
FEATURES:
• 9 No. Bi-directional Switch with IGBT and Fast Diode Bridge,Rating@1200V 50A Forms 3 Phase to 3 phase Matrix Converter Power Circuit • Output of Matrix Converter Terminated by Banana Connector in the Front Panel • 9 No. High Speed Opto- IC Provided for Gate PWM Isolation. • 9 No. Single Channel IGBT Driver IC with Current Limiting Facility Provided for IGBT Gate Driving. • 9 No. 15V DC Power Supply Provided Internally for Control Circuit. • 3 No. Inductor and AC Capacitor Provided for Three Phase Input Filter. • One No Three Phase Synchronizing Transformer (230/9V) Provided for three Phase Supply Synchronization • 6 nos Hall-effect Current Sensor with Signal Conditioning Circuit Provided for Output and Input Current Measurement and Protection. • AC voltmeter is provided for measure the input AC voltage. • +/- 15V DC Internally Provided for Sensor Signal Conditioner Circuits. • MCB Provided for Input power ON/OFF and OL Protection ON/OFF Switch. • Test points are provided on the front panel to measure the voltage, current and PWM signals • 34 pin FRC Connector Provided for IGBT Gate PWM Inputs. • Input : Three Phase 440V AC, 50 Hz. • Output : Three Phase Variable Voltage, variable frequency • Rating : Suitable for 1 HP 3Ø AC Induction Motor
Stereo Microscope
Specifications
| Objective Lens | : | 1x & 2x. | |
| Eyepiece Lens | : | WF 10x/20mm (or 15x on request) (Paired) | |
| Magnification | : | 10x or 20x (15x or 30x with 15x eye piece) |
