XTEMOS ELEMENT
AJAX PRODUCTS TABS
Human Upper And Lower Jaw
Frequency Response Analysis of Lead Lag Network
Frequency response of Lead, Lag network using P+I+D controller is a special purpose analog simulation, create using operational amplifiers. This simulator permits a detailed analysis of the first order and second order systems on the application of proportional, integral and derivative control to the improvement of their performance. The simulator may be used at high frequency for oscilloscope observation.
FEATURES:
• Built-in Function Generator (sine & square). • Self contained power supplies and power ON/OFF switch with indication. • Full mimic diagrams in the front panel. • The simulated process. - Simple Lag Process - Simple Lead Process • The simulated PID controller - Integral controller scaled in Integration time. - Derivative controller scaled in derivative action time. - Proportional band control scaled in % proportional band (PB).
LCR Resonance Apparatus
Objective : To plot Frequency Vs. Current Characteristics of LCR circuit when connected in series or in parallel.
Features : Instrument comprises of 3 Resistances, 3 Capacitors and 1 Inductance connected inside and connections brought out at Sockets. 2 AC moving coil meters to measure voltage and current.
Optional Acc. : Audio Frequency Function Generator
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Single Phase Bridge Firing Circuit
Specification
• Line synchronized IC based linear firing circuit for SCR applications. • Line synchronization achieved by 230 / 9V step down transformer. • Four nos. firing pulses to trigger four SCRs. • 1:1:1 Pulse transformer used for gate pulse isolation. • One no. potentiometer used to vary the firing angle (180° - 0°). • All four pulses terminated on the front panel for external SCR device module interface. • Carrier logic circuit implemented for SCR self start, carrier frequency 4KHz. • Debounce logic circuit implemented for SCR gate pulse ON/OFF. • One no. toggle switch for gate pulse ON/OFF. • 230V, 5Hz AC input, fuse provided for over load protection. • One no. ON/OFF switch with LED indication for power ON/OFF. • Provision to control the firing angle through external 0 to 5V DC.
Slide Wire Wheatstone Bridge
Description
Consists of a resistance wire with a sliding contact and a strip of aluminum to provide two “arms” of the bridge for known and unknown resistance. Strips of heavy aluminum are provided with a single gap in each of two arms for the resistance. All components are mounted on a heavy sheet metal base with Instructions.
LABORATORY AND MEDICAL MONOCULAR MICROSCOPE
PRODUCT DESCRIPTION:
Being a leading firm in this industry, we are deeply engaged in offering a high-quality range of MS 30 Medical Monocular Microscope.
Details:
- MS-30 Student Monocular Compound Microscope
- Viewing Body Monocular tube, Straight,
- Stand Monocular, frame inclines back to 90°
- Eyepiece eyepiece 10x
- Nosepiece Quadruple revolving Nosepiece
- ObjectivesSA series Achromatic objectives 10x/ NA 0.25 , 40x/ NA 0.65 (SL) , 100x/ NA 1.25 (SL, Oil)
- Stage Stage plate size 124 x 120mm with Mechanical stage for X and Y movement of slide up to 30 x 75mm with graduated scale and Vernier’s
- Focusing Separate coarse and fine focus controls. Coarse movement by Rack & Pinion and fine movement by Screw Lever Mechanism
- Condenser Sub-stage Iris diaphragm with moving up and down through rack and pinion, condenser NA 1.25 with Blue Filter
- Illumination System Plano concave reflector mirror mounted at the base
- Package Contents Thermocole Box, with operation manual, dust cover and cleaning cloth
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Android Based WSN Evaluation Kit
We are pleased to introduce a trainer which offers all the components (ARM 11 processor Board + GSM module + CMOS Camera + GPS module + ZigBee module +SD Wi-Fi module) of a Smart Cell Phone which works on Android OS which also Occupies 50% of the smart cell phone market. This Development Board gives you an Comprehensive solution integrating both hardware and software. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.
Features
• ARM11 Samsung S3C6410, ARM1176JZF-S, up to 667MHz • 256MByte mDDR RAM and 1GByte NAND Flash • 1 x 4-wire resistor touch screen interface, • 1 x 100M Ethernet interface, • 1 x DB9 5-wire serial port • 1 x Mini USB 2.0-OTG interface and USB Host 1.1 interface, • 1 x 3.5mm audio output and on board microphone interface, • 1 x TV-OUT • 1 x SD card socket, • 1 x Infrared receiver, • 4 x TTL serial port, • 1 x CMOS camera interface, • 1 x SDIO2 interface (can be connected to SD WiFi module), • 1 x 10pin JTAG interface, • 1 x PWM buzzer, • 1 x I2C-EEPROM, • 1 x backup battery for RTC, • 1 x AD adjustable resistor, • 8 x User button and 4 x LED
IoT Gateways
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Monocot Stem T. S.
Adult CPR Training Full Body Manikin
Description
These manikins are fabricated using an optimum quality raw material to ensure they resemble the human body nicely. Having all the necessary indicators, these manikins are highly reliable and certainly the best way to polish skills.Features:
Indicates correct/incorrect artificial respiration. Right/wrong position display. Stimulates patient through heart pressure and artificial respiration.
Compact Light Source
Smart LED Lighting module
Zigbee offers Green and Global Advanced Wireless Technology, Connecting the widest range of Devices to work together intelligently and help you to control your real world. CC2530 is the first System On chip, which has integrated 8051Microcontroller with ZigBee RF transceiver. A WSN based Smart LED lighting module has been developed with latest LED controller from MICREL, 10 LEDs, ZigBee RF module using CC2531 for Wireless Control with onboard Light Sensor. WSN based LED lighting module has a Base Board and a Zigbee RF module. Zigbee RF module can be plugged into the connector provided on the Base Board, meant for further upgradation.
Features
• 10 Nos. of LED of 2watt each • 400 milliwatts LED • Constant current driver for LED control • Connectors for plug-in Zigbee RF module • Remote ON/OFF control by Zigbee RF Control • On board light intensity sensor • LED Brightness control either by program or by Light Sensor input.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
VHDL/VERILOG Learning Kit
Features
• Based on 64 Macro cell Xilinx CPLD device : XC2C64A • 20 SPDT Slide switches • 16 output LEDs and One 7 segment LED display • 4x4 Matrix keys using Micro switches (4 multiplexed with 4Nos of Slide switch) • One NC/NO switch for giving manual clock • Square wave Oscillator • Onboard USB to JTAG and External JTAG Connector for programming the CPLD • 16 I/O Lines terminated at 20 pin connecter. • External 5 volt 2Amp power supply • Compatible with Xilinx ISE Design Suite Web Pack Software. • USB Cable • Onboard USB to JTAG is Compatible only with Vi JTAG 5.0 Software.
Color Target Comparator
Description
Color Target Comparator The colour meter for both colour and luminance measures surface colours of products. The CR series colour meter is included in our professional range. This colour meter can read the difference in colour in L d*a*b*, L*C*H* and Delta E*ab according to your requirements. The most popular model of colour meter in our range of products is the PCE-RGB. Aside from being easy to use and economical, the colour meter is used for determining the location of a colour on the XYZ axis of non-radioactive products. The geometry of the measurement of these colours, with luminosity including a field of measurement of 8mm, allows for universal use for all types of materials. Furthermore, these devices are used by artisans, paint manufacturers, architects, painters and designers for testing colours (for colour card, NCS, RAL, HKS) or for establishing colours after mixing various colours. If you have any queries, please contact us at.
Germination Of Dicot And Monocot Seed
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
DC Motor Kit
Description
A simple kit for students to gain insight into field poles, armatures and switches, one mounting base, two coils of insulated wire , field pole, mounting bracket, two armature halves, one piece of insulating tubing, motor shaft, two commutator insulators, two bronze wire brushes, two shaft supports, four paper fasteners, a AA battery holder and 6 each of screws and nuts. Requires one AA battery, not supplied, with assembly instructions.
Polarimeter, Senior
Description
Designed to accept observation tube upto 220 mm length. Its improved rotating half shadow system at the front ensures perfect focus and clear definition. With angular glass scale 0-360º, divided into degrees and reading upto 0.05º with micrometer. A sugar scale from 30º to 120º read upto 0.1 sugar degree. Supplied complete with two polarimeter tubes, 100 mm and 200 mm with dust cover.
Porcelain Mortar & Pestle
Description
Adarsh present optimum quality Porcelain Mortar & Pestle. The Mortar is provided with lip, glazed outside except bottom and unglazed inside. Pestle unglazed at grinding surface & glazed upwards for hand comfort in grinding.| Mortar Top ID (mm) | Mortar Top OD (mm) | Capacity (ml) | Mortar Height (mm) | |
|---|---|---|---|---|
| 60 | 80 | 60 | 44 | |
| 75 | 90 | 100 | 48 | |
| 85 | 105 | 150 | 70 | |
| 100 | 125 | 275 | 70 | |
| 125 | 155 | 550 | 88 | |
| 150 | 180 | 900 | 100 | |
| 175 | 200 | 1500 | 115 | |
| 200 | 230 | 2000 | 140 | |
| 250 | 285 | 4200 | 175 | |
| 300 | 300 | 7000 | 205 | |
| 350 | 400 | Available on demand | ||
| 400 | 450 | Available on demand |
Tray Dryer
| Design | Standard, Customized | |
| Capacity | 96 trays | |
| Automatic Grade | Automatic, Semi-Automatic | |
| Max Temperature | 250 degree C |
| Chamber Size (HxWxD) | Tray Capacity mm Inches | |
|---|---|---|
| 430x840x650 8Tray | 16”x32”x 1 1/4 | |
| 430x840x910 12Tray | 16”x32”x 1 1/4 | |
| 910x840x910 24Tray | 16”x32”x 1 1/4 | |
| 960x1270x1450 45Tray | 16”x32”x 1 1/4 | |
| 960x1700x1700 96Tray | 16”x32”x 1 1/4 |
Optional
Timer 0-24 hours. Digital temp. Indicator-cum-controller. Tray 16”x32”x 1 1/4 size.
