XTEMOS ELEMENT
AJAX PRODUCTS TABS
Window Air Conditioning Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Advanced Delivery Mechanism Demonstration Simulator
Description
Demonstrate the whole process of delivery. Demonstrate the fetus, umbilical cord and placenta of vacuum-assisted delivery, flexible fetal joint and multiple normal and abnormal positions of fetal delivery can be shown. Can practice and master the comprehensive skills of normal labor, abnormal labor (dystocia), midwifery, and perineum protection. Available Training of multiple pregnancies (twin pregnancy). Component: A (Matrix for delivery Demonstration)* El (Fetus for Demonstration).
Optical Auto Engineers Level
Features
• Excellent shockproof function. • Exclusive closed magnetic field, magnetically-dampened compensator. • Friction-braked rotation and endless horizontal drive. • Prism for viewing circular vial. • Water, dust and dirt proof. • Comes with a years warranty. • Full back up and repair service available.
Chrysopa Breeding Nest
Description
Teakwood frame with silk screen net on sides and collapsible cover on side. Cover can be fixed in position with help of lever. Top sliding plank of MDF covered with black cloth from inside and spirit polished from outside. A sapre plank supplied for replacement. Combs for removal of insect from plank. Beautiful spirit polish finish. Size 60x60x30cmXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Variable Inductor
Description
The enamelled wire winding and a cylindrical soft iron core are built into this unit. The iron core displacement inside the winding can manually adjusted by the knob to give precise measurements up to 1.3 H. Connections are made through 4 mm sockets.Specifications:
Resistivity: 0.0165 W/m; Inductance: 0.15 to 1.3 H; Voltage: 30 V AC or 60 V DC.
Test Tube Caps
The Test Tube Caps offered by us, come with a transparent polypropylene cap for test tubes, which proves to be an excellent protection to the contents of the tubes.
The grooves inside the cap tighten the fitting on the tube while the outer set in the tube making the combination a leak proof one.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Test Tube With Screw Cap 16 x 100 mm | 500 | |
| Cap For Test Tube Ø 25 mm | 500 |
Lamp Unit, Triple
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Flexible AC Transmission Systems
Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.
It consists of
• Generator Set-up (3Φ AC Source) • Simulated Transmission line • IGBT Based VSI Power Module • Series & Shunt Transformers with LC filter • RLC - Load setup • TMS320F2812 DSP Controller • Upgrade possibleGenerator Set-up (3Φ AC Source)
• 3 phase Alternator DC Motor Drive setup 3Φ / 1KVA / 1500 RPM / Salient Pole type coupled with 2HP/220V DC shunt motor and with suitable drive from 1Φ AC input supply with • suitable speed control, sensor and digital speed indicator. • Digital controller with IGBT based DC voltage controller for DC motor Armature Voltage variation 0-200V DC/10A & Alternator field voltage variation with necessary instruments • /meters/indicators.
Gyroscope
Air Conditioning Trainer Window Type
Window air conditioner is becoming now a day’s necessity. The unit demonstrates the application of window air conditioner & evaluation of its performance. It consists of a small room to which a small air conditioner is connected the room is provided with a transparent front cover with a heater inside to simulate heat load in the room. Various measurements are provided so that performance of system that is COP of system, actual & theoretical cooling capacity of system & power consumption of unit with different load conditions.
SPECIFICATIONS:
1.Compressor – Hermetically sealed, Kirloskar make, having the capacity of 1/10 ton of refrigeration using R-12 refrigerant to keep room temperature between 20 to 30 c. 2.Condenser – Finned tube type, with forced air flow over the tubes, 3.Capillary tube of matched length as expansion device. 4.Evaporator – Finned tube type with forced air flow, 5.Room – 0.6 X 0.7 X 0.7 m. height, provided with transparent front wall. A heater with input control is provided inside the room. Which simulates different load conditions. 6.Measurements and Controls a) H.P. / L.P. Pressure gauges b) Digital temperature indicator to measure the temperatures at various points. c) Energy meters to measure input to compressor & heater. d) High and low pressure cutout. e) Thermostat to put off the compressor at set room temperature. f) Necessary switch for electrical components.SERVICES REQUIRED:
1.Floor area of 2m X 1 m. 2.230V, 15AC stabilized supply with earthing connection
Ripple Tank
Description :-
Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet.
The tank edges are shaped to minimize undesired reflections.
Tank has a drain hole closed by a rubber stopper.
With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height.
The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam.
The motor has an eccentric weight which causes the beam to oscillate.
Two point sources are provided by two plastic spheres, each mounted on a right angle rod.
A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant.
Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm.
Complete with following accessories :-
1. Two straight obstacles of aluminium alloy length 130 mm.
2. One straight obstacle length 40 mm.
3. One curved reflector radius 200 mm.
4. One trapezoidal plastic plate for refraction.
5. One wood hand wave roller.
6. One water dropper.
7. One pkt. rubber bands.
8. One foam plastic sponge.
9.One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Prostate Inspection Model
Description
This model provides prostates with tumors in 4 different development periods. The 1st development: Beginning, a little big but the prostates still works well. The 2nd development: Some hard tubers can be served in the top right quadrant of prostate. It's the beginning of the tumors. The 3rd development: The tumor is proliferating, and the previous tubers become bumps. The 4th development: The prostates is all replaced by tumors, the surface become more rough and harder than before.
Citical Radius Of Insulating Material
Citical Radius of Insulating Material:
At particular radius of insulation over a cylinder, loss of heat is maximum. The unit consists of a G.I. pipe provided with plaster of Paris insulation on out side surface. Four pipes are provided with heater inside having input control. Input to heaters is measured by common voltmeter and ammeter, by controlling input to heaters, it is shown that critical radius of insulation is ratio of thermal conductivity and outside heat transfer co-efficient.
SPECIFICATIONS:
1.G. I. Pipes with electrical heater inside – 4 Nos. 2.Insulation over the pipes of different thickness. 3.Controls and Measurements – a) Dimmerstat to control heater input – 4 Nos. b) A voltmeter and ammeter to measure inputs to heater. c) Digital temperature indicator to measure temperatures across insulation. d) Necessary switches and controls. A technical manual accompanies the unit.SERVICES REQUIRED:
230 V, 5 Amp., A.C., Supply with earthing connection. Floor Area of 1 m. X 1 m X 1.5m. height.
Electronic Total Station
Two Stroke Diesel Engine Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Crystal Model Set
We offer Crystal Model Set to the esteemed clients.
The Crystal Model Sets contain different colored jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material : Polyethylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Crystal Model Set - Diamond | 1 | |
| Crystal Model Set - Sodium Chloride | 1 | |
| Crystal Model Set - Graphite | 1 |
Human Torso, With Head, Half Size
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Color Gauge Meter
Description
Color Gauge Meter Non-corrosive mounting hardware with weather resistant sealed lenses Superior quality internal components UV fade resistant race pointers Come with White Lights with Red removable cover Feature aluminum or plastic non-corrosive cases (automotive versions are steel) The AutoMeter Marine White Five Gauge Combination Kit is available in Standard or Monster Varieties and includes: 6000 RPM Tachometer Voltmeter Fuel Level Oil Pressure Water Temperature.
Biological Science Set
Set of 22 slides. Fulfils the requirements of most biology courses.
The slides have been chosen for their relevance to international Curriculum and for the clarity with which they show structures, which may be related directly to function.
The set comprises following slides.
| Adipose tissue | Allium LS root tip for mitosis |
| Allium, Leaf, WM epidermis with stomata | Artery and vein |
| Cucurbita, stem, TS and LS | Entire Kidney, LS Mixed Bacteria |
| Germinating pollen, LS stigma | Human blood smear |
| Ligustrum (Privet) TS leaf | Lung |
| Mixed Pollen | Nerve cells, isolated |
| Nettle stinging cells | Pacinian corpuscle receptor cells |
| Saccharo0myces, budding | Skin |
| Small intestine, TS injected | Squamous, epithelium, cheek cells |
| Stomach, VS | Straited muscle |
| Triticum, LS Seed | Zea Stem, TS and LS |
Flow Over Weir Or Open Channel Apparatus
Flow Over Weir Or Open Channel Apparatus:
A ‘WEIR’ is the name given to concrete or masonry structure built across a river (or stream) in order to raise the level of water on the upstream side and to allow the excess water to flow over its entire length to the downstream side. Weirs may also be used for measuring the rate of flow of water in river or streams.
Different shapes of “WEIRS” generally used are sharp-crested weir, broadcasted weir and ogee shaped weir.
In the unit a centrifugal pump sucks the water from the sump tank, and discharges it to a small flow channel. The weir is fitted at the end of channel. All the weirs are interchangeable. The water-flowing over the weir falls in the collector. Water coming at from the collector can be directed to the sump or can be directed in to the measuring tank for measurement of flow.
SPECIFICATIONS:
[1] The unit is provided with following weirs: (a) Sharp-crested weir. (b) Broad-crested weir. (c) Ogee shaped weir. [2] Pump 1/2 H.P. monoblock. [3] Flow measurement – Measuring tank calibrated water flow meter is used. A technical manual accompanies the unit.SERVICES REQUIRED:
[1] Floor surface – 2.5 m x 1.5 m. [2] 230 v, 5 amp supply with earthing connection
Mock Layout Of Car Wiring Latest Type
Mock Layout Of Car Wiring Latest Type
All the components used in the apparatus are of modern car. The complete mock layout is beautifully divided into 5 sections as under
(A) Front Lighting Panel
(B) Dash Board Panel
(C) Ignition System
(D) Rear Lighting Panel
(E) Motorised Charging System
With the help of this mock layout system its becomes very easy for the students to understand the actual working of electrical system of a modern car.
