XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Photon Energy Array

This unit is designed for the Advanced Physics Course and provides everything necessary for studying the characteristics of modern LEDs. Measurements taken with the unit enable an approximate value of Planck’s constant to be determined.

Power Steering Trainer System Actual Working

Power Steering Trainer System – Actual Working The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.

Reynold S Apparatus

DESCRIPTION:-

The Set-up is designed to verify Reynold’s Apparatus experimentally. The Apparatus consists of a glass tube which one end having bell mouth entrance connected to a water tank. At the other end of the glass tube a cock is provided to vary the rate of flow. Flow rate of water can be measured with the help of Measuring Cylinder and Stop Watch, supplied with the set-up. A capillary tube is introduced centrally in the bell mouth. To this tube dye is fed from a small container, placed at the top of Constant head Tank, through polythene tubing.

EXPERIMENTS:-

Ø To study different types of flow. Ø To determine the Reynold’s Number and hence the type of floe either laminar or turbulent.

UTILITIES REQUIRED: -

Ø Water Supply. Ø Drain

TECHNICAL SPECIFICATION: -

Ø Tube:Material Borosilicate Glass
Ø Dye Vessel:Material SS, Suitable Capacity
Ø Capillary Tube:Material Copper/Stainless Steel
Ø Constant Head Water Tank:Capacity 40 Liters.
Ø Water Circulation:FHP Pump
Ø Flow Measurement:Using Measuring Cylinder
Ø Sump Tank:Capacity 60 Liters
Ø Stop Watch:Capacity 60 Liters. Electronic
Ø Control Panel Comprises of:Standard make, On/Off Switch, Mains Indicator, etc.
Ø The Whole set-up is well designed and arranged in a good quality painted structure.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Conical Measures

The Conical Measures offered by us are very effectively for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable measures have a hexagonal base, which provides it excellent stability. The measures are clear, have good chemical resistance, and have raised graduation for easy. Material : Polypropylene
ParticularsPack (Pcs) 
Conical Measure 12 ml12 
Conical Measure 25 ml12 
Conical Measure 50 ml12 
Conical Measure 125 ml12 
Conical Measure 200 ml12 

Plant Structure II – Gymnosperms, Ferns, Mosses & Liverworts

Set of 17 Slides, comprising Dryopteris, TS pinnule with sori Dryopteris, TS Rachis Dryopteris, TS rhizome Funaria, LS of capsule Lycopodium, TS Stem Marchantia, VS thallus Moss, LS antheridial Head Moss, Leaf WM Pinus, TS young root Pinus, LS male cone with microscopers Pinus, LS whole female cone Pinus, Pollen Pinus, stem macerated Pinus, TS leaf Pinus, TS old stem Polytrichum, TS stem
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Cytology

Description

All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Cell Membrane showing structure & functions Cell Wall, showing structure & functions Endoplasmic Reticulum showing structure & functions Mitochondrion – showing structure & functions Golgi Complex showing structure & functions Chloroplast – showing structure & functions Nucleus – showing structure & functions Chromosome – showing structure & functions D.N.A. – showing structure & functions R.N.A. – showing structure & functions

Conventional Signs

Description

Showing about 60 signs in actual relief

Microprocessor Photo Colorimeter

Microprocessor Photo Colorimeter is a compact and easy to operate instrument for Photo Colorimeter analysis of any concentration. The output is available on a 16 x 2 line alphanumeric backlit LCD display in terms of %Transmission (%T), Absorbance (Abs.), Concentration (Conc.) and K Factor. This instrument has 100 sample storage memory and printer output facility for printing data with any dot matrix printer. The use of microcontroller has made it extremely versatile and accurate instrument. 10 mm path length matched test tubes are used for sample and blank. The use of high class standard wide range glass filters covering 400 to 700 nm give extremely good results. The filter setting is controlled by a rotating disc having 8 filters. An automatic shutter is provided to stop the light reaching the photocell, when test tube is not inserted in the tube holder. This increases the life of photocell tremendously. Facility has been provided to store the last K Factor and the standard concentration value. User can also enter any known ‘Factor’ for a test, thereby eliminating the need to re-run the standards again and again.

Specifications

Wavelength Range400 - 700 nm  
Resolution%T: 1, Abs: 0.01, Conc.: 0.01, K Factor: 0.01  
Photometric Range%T: 0 - 100, Abs: 0 - 1.99, Conc.: 0 - 1999, K Factor: 0 - 1999  
DetectorWide range Silicon Photodiode/Photocell  
Display16 x 2 line alphanumeric backlit LCD display  
KeyboardSoft Touch Membrane Keys  
Data StorageUp-to 100 Samples (0 - 99)  
Light Sources6.8 V, 0.3 Amp Tungsten Lamp  
Sample System10 mm path length matched glass test tube  
Filters400, 450, 490, 520, 540, 570, 620, 680 nm  
Printer InterfaceCentronics Parallel Printer interface for Dot Matrix Printer  
Serial InterfaceRS-232C interface (optional available on request) 
Power230 V ± 10% AC, 50 Hz  
Dimensions(L x B x H) 240 x 254 x 90 mm (Approx.)  
Weight2.5 Kg (Approx.)  

Accessories

Matched Test Tube: A set of 5, Spare Lamp, Mains Lead, Operation Manual and Dust Cover.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Bacteriological Incubator

Specification

Standard Double Wall Fabrication, inner & outer chamber made of thick mild steel sheet. Painted with hammer tone paint finish. The gap between the walls is fitted with special grade glass wool. Provided with two or three removable shelves. Heating elements provided on three sides to attain quick and uniform heating in range of 30°C to 110°C + 1°C controlled by hydraulic type capillary thermostat. An L- Shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.

Optional

Air circulating fan. Timer 0-24 hours.
Chamber Size In mmsChamber SizeCap. (App.)
300x300x300(12"x12"x12")28L
350x350x350(14"x14"x14")45L
400x400x400(16"x16"x16")65L
450x450x450(18"x18"x18")95L
600x450x450(24"x18"x18")125L
600x600x600(24"x24"x24")224L

Two Input or Gate

To study the OR digital logic gate and verification of the truth table.

Porcelain Crucible Lid

Description

Adarsh is specialized in the Export, and Supply of Porcelain Crucible Lids. These porcelain crucible lids exhibit impressive features and high strength.

Diameter Inside (mm)

26 34 38 47 53 58 69 80 93 108

Bell Jar and Vacuum Pump Set

Description :-
Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure. The kit clearly demonstrates the method by which a pump works. Also illustrates that air has mass and helps find its mass and density. Explain the effect of surrounding air pressure on a sealed balloon. The balloon will expand when the surrounding air is removed. And also demonstrate that liquid boils at reduced temperature when the surrounding air pressure is reduced with instructions.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Grinder Tool Dynamometers

This a simple set up to study the various forces resolved during grinding operation, designed by sharp techno system for demonstration purpose for the students undergoing tool desing study. This unit works on octagonal ring method using strain gauge as a sensor. A two channel digital force indicator facilitates to measure both forces simulteniously.

FEATURES:

1.Rigid in construction & compact unit. 2.Assessment of cutting forces by giving due consideration to various parameters like depth of cut, material, speed and feed . 3.Eassy in handling & Digital force indicators to measure two forces simultaneously.

SPECIFICATIONS:

1.Mechanical sencing unit with two octagonal rings and strain gauges. 2.Two channel digital force indicator with balancing potentiometers and polycarbonate front plate. 3.Range of force measurement in coordinate direction – 0 to 200 kg. 4.Over all size of mechanical unit – 300 x 300 mm.

SERVICE REQUIRED:

1.Necessary surface grinding machine. 2.230 volts, single phase, 50 Hz stabilized power supply.

Humidifier

Description

Humidifier based on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which are part of the atmosphere, thereby reaching every corner of the room, causing and resulting in uniform humidity in the room. Due to the upward thrust imparted to the micron sized water droplets, by high speed motorized unit, they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient conditions. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cubic meters. The unit is provided with high speed 2800 RPM motor to run longer period, and the blades are aerodynamically balanced to ensure drop less fumigation. To work on 220/230 volts A.C. supply

Model of Astronomical Telescope

Description

The model is complete with lenses, a diagram showing path of rays and is fitted on stand, for demonstration.

Set of Springs

Closely wounded Steel extension springs with loops at both sides, dia 6 mm approx. Closely wound with loops at both sides, dia. 6 mm approx. wire of 19 swg. Length 150 mm, Extension 230 mm average for 200g load
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture