XTEMOS ELEMENT
AJAX PRODUCTS TABS
Domestic Refrigerator Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Trans-Ratio
Description
Trans-Ratio is a simple transformer system that allows students to investigate the relationship between primary voltage, secondary voltage and the turns ratio. The Primary coil has tappings at 200, 400 and 600 turns while the Secondary has 100, 200, 300, 400, 500 and 600 turns all brought out to 4mm sockets. An AC supply of upto 6 V as well as AC voltmeters are required for demonstration purpose.
Rat & Mosquito Cage
Description
Made of aluminium angle framework supported on wooden batons. Provided with fine wire mesh on sides. Wide wire mesh partition in the centre to facilitate mosquitoes pass into other portion. On one side a round opening with black cloth sleeve and on other side a sliding window with drop closure provided in centre. Size 45x30x30cm.
Ringing Table
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Digital Stroboscope
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Siemens IoT 2040 Gateway Based IoT Development System
SIMATIC IoT 2040 is an Industrial IoT Gateway, reliable open platform for collecting, Processing and transmission data. It helps the students to get the industrial IoT experience and develop Industry 4.0 Projects rapidly.
Specification:
• IoT 2040 Gateway - PLC and sensors of many brands can be integrated through Ethernet & Serial ports. - Open Protocols: Modbus, Profinet, REST or MQTT, AMQP, OPC UA - Based on Intel Quark X1020 ,(x86)@400MHz - Compatible With Open Source Software Arduino IDE and Yocto Linux - High level language support : Java, Python, C/C++ - 1 GB RAM, 8MB Flash ,256KB SRAM - Micro SD card Slot up to 32GB - One miniPCIe Slot for hardware expansion for WLAN/Additional Ethernet Port - Arduino Uno – R3 Compatible - Intel Wi-Fi + Bluetooth Module for 300MB data rate - 2xRS232/422/485(Switchable) - 1xUSB Controller + 1 x Device - 2 x 10 /100 Mbps Ethernet RJ45 • 5 types of sensors such as Temperaturesensor, LDR sensor, Motion sensor, Humidity sensor, Magnetic sensor included to • interface with IoT2040 & add on modules of IoT2040 • The IoT 2040 Gateway can communicate with PLC, DCS using profinet or OPC UA. • Analog Inputs are terminated in a SP7 patch connector • 4Nos of Digital Input SPDT Switch • 4Nos of user LEDs
Meker Burner, with Stopcock
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Hand Stroboscope
Half lower Jaw small
Exterior Angle of Regular Polygan
Gear Box Actual Cut Section
Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Micro Controller Development Board
Microcontroller development board is designed to train engineers about the structural design, instructions and utilize the 8051 microcontroller board. A 40 pin ZIF socket for easy insertion of 89 series microcontroller with four 10 Pin FRC connectors is provided on the board. Outputs from I/O port from microcontroller are available on FRC connectors those can be easily connect with different modules. Microcontroller Development Board consists of EEPROM with 4K memory changeable with more RTC DS1307 with 32 KHz crystal with battery backup One 12 V stepper motor with drivers.One 16 x 2 LCD display. 8 Output LED indicators. 4 multiplexed 7-segment display. 8 single bit toggle switch. 4 x 4 matrix keyboard. Single Channel ADC with potentiometer and provision of external inputs RS 232 serial communication. One 12 V DC motor driver.
Weighing Bottle with Interchangeable Stopper
8086 Microprocessor Trainer Kit
Specification
• INTEL 8086CPU AT 4.77 MHZ CLOCK SPEED • 16KB for monitor EPROM upgradable to 64kb • 16KB RAM expandable to 64KB • Battery backup provision for RAM upto 64KB • 16 x 2 (or) 20 x 4 Alphanumeric LCD display • 101 keys IBM compatible keyboard • 24 TTL I/O lines brought out to two nos., of 26 pin FRC connector • 1 number of standard RS232C compatible serial port brought out to a pin D type male connector. • 3 channel 16 bit counter/timer using 8253. • Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB series • of experiment boards and bus expansion. • 8 no’s of interrupt lines are terminated at a 10 pin connector. • Kit operates with a single +5V/DC supply • The kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover. • Built-in line assembler & Disassembler • Powerful debugging monitor to develop user program.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Corner Cube Reflector
Description
To demonstrate principles of light and reflection, The reflector features three front-surfaced triangular mirrors mounted at right angles to one another on a hardwood base. Light beams hitting any of the mirrors from any angle are bounced off the other two mirrors and reflected back in the same direction they came from. With instructions.
Pulleys Bench Clamp Fitting
CONDENSER CLAMP
PRODUCT DESCRIPTION
- Three finger condenser extension clamp with Bose head.
- Aluminum stem the overall length of the clamp is 10.0.
- The extension rod contributing 6 the rubber coated jaws will open to 3.5 and will provide a six point contact for a firm
- The boss head right angle clamp will accept rods up to.63 /16 mm.
- 3 Finger Aluminium Condenser Clamp (Rubber Lined)
- 4 Finger Aluminium Condenser Clamp (Cork Lined)
- 3 Finger Brass C.P. Condenser Clamp (Cork Lined)
- 4 Finger Brass C.P. Condenser Clamp (Cork Lined)
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Artery models
Empowered with the perfect combination of trained men and modern machines, we are able to manufacture, supply and export a wide range of Artery models.
These products are used in different hospitals and medical centers for teaching students and physicians about the structure of arteries.
With the help of our diligent team of skilled personnel, we are able to provide a unmatched range of these products. Owing to our team of trained logistics professionals, we are able to provide the clients with the on time delivery of Artery models.
