XTEMOS ELEMENT
AJAX PRODUCTS TABS
Light Kit
Description
Simple kit that helps explain students the principle of reflection and refraction. Using mirrors, lenses, acrylic prism set and a ray box, light can be reflected and refracted in different ways. The acrylic prism set includes a triangular, half-round, double convex and rectangular prism and two double concave prisms all packed in a wooden storage box. A Newton color disc is also provided with this set. The color disc illustrates an important property of light that white light is composed of seven colors. With instructions.
Cyclone IV FPGA Controller
FEATURES:
• Based on Altera family Cyclone IV, Device : EP4CE30 • One 34 pin header used for IPM Interface. - 16 PWM output - 8 capture inputs. • One 26 pin header ADC. - 4 channel 1MSPS ADC. - Total 8 channel using 2 Nos of ADC. - 12 bit resolution. - Input range -10V to 10V / -5V to 5V. • One 5 pin phoenix connector DAC - 4 channel DAC, 12 bit resolution. - Output range -10V to 10V / -5V to 5V. • 8 output Light Emitting Diodes (LEDs). • 8 input slide Switches. • 4 user push button switches. • 2-user limit switch. • 20 x 4 Alphanumeric LCD display. • On Board Isolated JTAG Programmer Compatible with QuartusII software. • Isolated USB (USB to Serial) interface. • 3 Nos of 20 pin header each have 16 IOs.
Three Step Inductor
Description
This three step inductor consists of a coil of enamelled copper wire wound over an insulated spool. The coil consists of 4 layers of 200 turns each. The tappings at 200, 400 and 800 turns are brought out at 4 mm sockets. The output inductances at these tappings are as follows. No. of turns Resistance 200, Inductor 0.3 mH, Resistance 0.6Ω No. of turns Resistance 400, Inductor 1.2 mH, Resistance 1.2Ω No. of turns Resistance 800, Inductor 5.0 mH, Resistance 2.6Ω. One can easily change the inductor value of the instrument on just inserting a soft iron core inside the bobbinXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Laboratory Stirrer
Laboratory Stirrer (Mechanical Stirrer)
Fitted with speed regulator, height and space adjustable 1/20 H.P.
AC/DC Motor.
Features
Stir power: 150 W. Stirring and heating volume: up to 80L (H2O). Stir speed: 60- 1500rpm. rotate speed display, time accurate, acceleration precise structure, bidirectional mixing.
89V51 Development Board
Specification:
• High Performance P89V51RD2 device • On board ON/OFF switch and programmer / execution switch • 4x4 Matrix Keypad interface • 8-way DIP switch for digital logical input selection • 8 LEDs for digital output • One 16x2 Alphanumeric LCD display • 4x4 Matrix Keypad, On board 16x2 LCD • Real Time Clock (RTC) interface with four Functional keys • RS232 – UART interface with two status LEDs • All the 32 I/O lines are terminated via 4 FRC connectors • On board 0.5Kg Stepper motor with driver circuit • 2 nos of 12V relay for DC Motor • Software compatible for both C and Assembly language • 8 channel ADC with built in analog signals, internal & external data i/p, Temperature sensor, 2 nos of potentiometer for signal separation • On board DAC with buzzer
Policemen Stirring Rods
We are a chief Exporter & Trader of Policemen Stirring Rods.
The Policemen Stirring Rods are a multipurpose apparatus, which work as a stirrer as well spatula.
The fattened ends of this rod form two small spatulas.
Avail the Policemen Stirring Rods from us at reasonable market prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Policemen Stirring Rod Ø-6 mm x h-245 mm | 12 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Android Based WSN Evaluation Kit
We are pleased to introduce a trainer which offers all the components (ARM 11 processor Board + GSM module + CMOS Camera + GPS module + ZigBee module +SD Wi-Fi module) of a Smart Cell Phone which works on Android OS which also Occupies 50% of the smart cell phone market. This Development Board gives you an Comprehensive solution integrating both hardware and software. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.
Features
• ARM11 Samsung S3C6410, ARM1176JZF-S, up to 667MHz • 256MByte mDDR RAM and 1GByte NAND Flash • 1 x 4-wire resistor touch screen interface, • 1 x 100M Ethernet interface, • 1 x DB9 5-wire serial port • 1 x Mini USB 2.0-OTG interface and USB Host 1.1 interface, • 1 x 3.5mm audio output and on board microphone interface, • 1 x TV-OUT • 1 x SD card socket, • 1 x Infrared receiver, • 4 x TTL serial port, • 1 x CMOS camera interface, • 1 x SDIO2 interface (can be connected to SD WiFi module), • 1 x 10pin JTAG interface, • 1 x PWM buzzer, • 1 x I2C-EEPROM, • 1 x backup battery for RTC, • 1 x AD adjustable resistor, • 8 x User button and 4 x LED
Grinder Tool Dynamometers
This a simple set up to study the various forces resolved during grinding operation, designed by sharp techno system for demonstration purpose for the students undergoing tool desing study. This unit works on octagonal ring method using strain gauge as a sensor. A two channel digital force indicator facilitates to measure both forces simulteniously.
FEATURES:
1.Rigid in construction & compact unit. 2.Assessment of cutting forces by giving due consideration to various parameters like depth of cut, material, speed and feed . 3.Eassy in handling & Digital force indicators to measure two forces simultaneously.SPECIFICATIONS:
1.Mechanical sencing unit with two octagonal rings and strain gauges. 2.Two channel digital force indicator with balancing potentiometers and polycarbonate front plate. 3.Range of force measurement in coordinate direction – 0 to 200 kg. 4.Over all size of mechanical unit – 300 x 300 mm.SERVICE REQUIRED:
1.Necessary surface grinding machine. 2.230 volts, single phase, 50 Hz stabilized power supply.
Cryo Coders
We are a leading Exporter & Trader of Cryo Coders.
The Cryo Coders offered by us are available in different colors can easily fit into the cap of cryo vials for color identification of different samples.
Avail the Cryo Coders from us at leading market prices.
Material : Polystyrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Cryo Coders | 100 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Balance Spring
Dicot Plant Stem
Laser Reflection and Refraction Tank
Description
Laser Reflection and Refraction Tank demonstrates the principle of reflection and refraction. The clear circular acrylic tank has a circular scale graduated on the white base of the tank, making it easy to measure angles. Adjust the pivot-arm mounted laser to any angle along its full 360° range and measure the angle of reflection or refraction. Rotate the laser and observe first a reflected ray, then both a reflected and refracted ray, and finally just a refracted ray. Leveling screws on the tank’s base make leveling quick and easy. The laser is attached to the pivot-arm by a magnet and can be removed for use in other experiments. Instructions included.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Meker Burner, with Stopcock
Angel Sum Property of Triangle
Surface Tension Balance, Searle’s
A horizontal frame is mounted on a rod fitted to a base & carries a steel wire stretched across it, the tension of which can be adjusted by a tightening screw.
A light metal pointer with a counterpoise is attached to the centre of the wire clamp.
A pan is hung from a notch in the pointer and has a hook at its underside from which can be suspended a light weight rectangular frame or a metal clip to hold a micro slide edge.
The tip of the pointer moves over a graduated scale. With rectangular wire frame, slide clip, six micro slides & 3 meters of spare wire.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Vortex Shaker (Test Tube Shaker)
Compact Vortex Shaker
Compact, rugged construction. Heavy metal base & rubber feet prevent movement of the shaker during use. Choice of continuous & touch mode. Variable speed control. Include one hand insert, micro tube insert & cup attachment.Product Details
Maximum speed : 3000 rpm Usage : Laboratory Capacity : 600ml
Composite Walls Apparatus
Composite Walls Apparatus:
The apparatus consists of a pair of M.S. plates, Bakelite, brass/aluminum. These plates in series on either side of the heater form a composite wall. The whole unit is clamped in a frame, which can be viewed through the Perspex sheet. The thermocouple tapings enables us to find out the conductivity and resistance of the composite walls.
SPECIFICATIONS:
1.Heater- Mica healer of dia. 250 mm. 2.Plates- a) M.S. plates of thickness 25mm & dia. 250mm.-2 nos. b) Bakelite plates of thickness 10mm & dia. 250mm.-2 nos. c)Brass/Aluminum plates of thickness 15mm & dia. 250mm.-2nos 3.Dimmerstat – 2 A capacity. 4.Measurements — a) voltmeter and an Ammeter to measure input power. b) Multichannel digital temperature indicator to measure temperatures at- various points. A technical manual accompanies the unit.SERVICES REQUIRED:
230 V, A.C. stabilized supply along with earthing connection. Bench area Im x lm x 0.5m height
Box Sextant With Leather
Description
Cylindrical brass sextant in leather case. The sextand has pull out eyepieces, silvered scale and vernier magnifier on a hinged arm. The brass cover screws onto the base as a handle. The leather case is embossed with a flower on both sides. The case has an attached cover which fastens with a strap. The inside of the case is lined with purple velvet like material. Maker's mark on sextand, embossed stamp on case.
Fiber Optics Communication Set
Objective:
To construct an optical transmitter and transmission of signal through Fiber Optics Cable. To construct an Optical Receiver and study the Attenuation of Signal when transmitted from Transmitter to Receiver end. Analog and Digital link can also be studied as this unit is complete with Sine and Square Waves. Bending losses can also be studied.
Features:
Instrument comprises of Microphone Preamplifier stages consists of MIC (Microphone), Preamplifier and Amplifier (Voice is converted to electrical signal and then amplified) and fed to LED (Transmitter) and then through fibre cable, signal is sent to Photodetector (Transistor) and again amplifier and output is sent to Speaker Unit. Power Supply of +6 VDC is used in Amplifier ckt. 2 No. Fiber Optics cables are provided (one of them is 50 cm long and the other is 100 cm long). One more fiber cable of 50mm length having connector at one end is also provided. Connectors a both end of fiber cable are provided for insertion in sockets provided on the front panel. Bending losses can also be studied in long wire.
Standard: MIC with 2 meter long lead and a Speaker 4”, 4 ohm are mounted in a vertical box.
Accuracy: with 1 meter long connecting leads. 2 No. Fiber optic cable having length of 50 cm and 100 cm are provided.
Optional : Digital multimeter (3 1/2 Digit, Big size Display) This model also include Digital Multimeter and wooden frame for measurement of Numerical aperture i.e. complete in all respect including facility for measurement of numerical aperture.
Rotary Shaker (Platform Type)
Body made out of thick mild steel finished with powder coating.
Heavy duty PMDC motors for suitable capacities are provided for long time, continuous operation.
Fixed speed and variable speed models are offered.
Platform is provided RPM range-upto 250 RPM, electronic control, 0-60 min timer.
Workable on 220 V AC 50Hz single phase.
Optional
Digital R.P.M. indicator. Digital timer (0-99 min.).| Platform size in cm | Holding capacity | |
|---|---|---|
| 45x45 mm | 25 flasks of 100 ml | |
| 45x45 mm | 36 flasks of 50 ml | |
| 45x45 mm | 16 flasks of 250 ml | |
| 55x55 mm | 25 flasks of 50 ml | |
| 65x65 mm | 36 flasks of 250 ml | |
| 105x105 mm | 81 flasks of 50 ml | |
| 105x105 mm | 64 flasks of 250 ml |
PNEUMATIC TROUGH
PRODUCT DESCRIPTION:
Use a circular Glass Circular Pneumatic Trough made of soda lime glass to conduct gas analysis experimentation in the laboratory. A secondary use is for specimen storage
Features:
- Circular soda lime glass
- For collection of gases over water
- Three sizes
Coplin Jar
We present to our valued clients the special range of Coplin Jars.
Our Coplin Jars are made up of polypropylene and can hold 10 sliders of the size 1" x 3" back to back.
The interior of the Coplin Jar is grooved in way to hold slides in erect position.
Domed & shallow threaded screw cap provides protection to the slides.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Coplin Jar | 12 |
