XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Digital Meters

Description

Portable type, having large display of 3½ digits, type LCD, power 9 Volts battery, accuracy + 1 digit, size 125x65 mm. DC voltage ranges 0-199.9 mV 0-1.99 V 0-19.9 V 0-199.9 V DC current larges 0-199.9 mA 0-1.99 mA 0-19.9 mA 0-199.9mA 0-10 Amp.

Dip Needle

Description

Revolving in pivots, with a graduated quadrant, rotatable on a base marked every 45°.

TMS320F2812 Based DSP Trainer

FEATURES:

• 12 Motor control PWM & 4 Individual PWM output • 16 channel, 12 bit ADC • 56 Individually programmable GPIO lines • 2 Quadrature encoder interface / 6 capture input • 128K x 16 bit flash memory • 1K x 16 bit OTP ROM • 14K x 16 bit SARAM • 16 LEDs are provided for user program development & debug • Opto isolated USB to Serial Interface • 3 Switches are provided for user interface like, frequency, speed variations etc., • Bead Inductances provided for RF EMI rejection • 16 ADC inputs are protected and terminated at 26 Pin FRC connector. • 8 I/O lines are protected and terminated at 50 Pin FRC connector • 12 PWM outputs and 6 capture inputs are terminated at 34 pin FRC connector • On board isolated USB to JTAG interface

Burette Stand Wooden,Double

Description

For two burettes, Made of seasoned hardwood, polished, with clamping screws. Rods are approx. 460 x 16 mm. Double base size 290 x 100 mm

Specifications:

Length : (in) 22.4 Width : (in) 6.7
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Zener Diode Unit

Mounted on transparent covered base for easy view. A diagram and two color coded sockets are provided for connection with any circuit.

Plantation Pots

Plantation Pots, moulded in polypropylene, are available in four different sizes. The Plantation Pots have a downward extended rim, which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose. Material : Polypropylene
ParticularsPack (Pcs) 
Plantation Pots 100 mm20 
Plantation Pots 150 mm20 
Plantation Pots 200 mm20 
Plantation Pots 250 mm20 

‘Gravity’ By Free Fall Apparatus

Consists of an electromagnet housed in a plastic moulded case with connections for an external timer, with a heavy steel sphere, and a platform unit. For determination of 'g' (the gravitational acceleration) by free fall method. The apparatus consists of an electromagnet which is housed in a plastic moulded case with 4 mm socket connections provided to energize the magnet and another pair of sockets for connection to a timer in use. To perform the experiment, an electromagnet is energized and a metal sphere is attached. As soon as the power to the electromagnet is switched off the sphere falls and the unit activates the timer. When the sphere hits the platform, which is connected to a micro switch, the timer stops and the time of fall can be determined. For use with compatible timer (product code LBTM). Unit conveniently attaches to all commonly used stands (stand not supplied, see Stand & Rod Assembly - Value Pack STD-RD).

Profile Projector 300mm Dia

Specifications

300mm dia 360 degree rotatable graduated screen with venire and 90 degree cross hair line providing high accuracy of linear and angular measurements, providing illumination of contour lamp 12V/100W and two surface (12v/35W) lamps, with three standard magnifications.

Standard Features:

X-Y Bed Size:150mm X 150mm, fitted with hard steel balls for X-Y movement
Travel X-Y movement (Standard):50 X 50mm
Micrometers (50mm Dia):Zero Adjustable 25mm (L.C 0.01mm)
Angular Measurement :Manual, 360 degree graduated ring with 1 minute venire
Maximum size of object view :28mm (dia)
Max Working Distance:65 mm
Standard Magnifications:10x, 20x & 50x
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Male Catheterization Training Simulator

Description

Catheterization Trainer Simulator trainer, male bladder catheterization procedures can be realistically demonstrated, practiced and assessed. The genital inserts are placed into the anatomically correct lower abdominal model and held in place with magnets.

The material is soft and flexible:

the foreskin is movable and the penis can be stretched. This way the student can practice all the necessary gestures for catheterization (e.g. disinfection). The material gives a realistic feeling when inserting and removing the catheter into the bladder with realistic resistance and insertion depths.

Direct learning:

When the catheter has been correctly inserted, fluid runs out, just like with a real patient. The catheter can also be checked through the transparent bladder. The abdominal wall can be removed so that the process can be viewed better.

Various levels of difficulty:

On the male insert, three different levels of prostate narrowing can be set. In the narrowest case, the student can feel that catheterization is no longer possible through the urethra and that a suprapubic catheter will have to be inserted. A suprapubic catheter has already been put in place and the student can practice cleaning it and taking care of it with the trainer.

All the benefits of the male catheterization simulator at a glance:

Male catheterization with realistic resistance 3 levels of adjustable prostate narrowing soft and movable foreskin (for practicing disinfection, for example) Anatomically realistic pelvic structure Liquid outflow if catheterization is successfully carried out The transparent bladder can be checked and the abdominal wall can be removed Includes suprapubic catheter for practicing, cleaning and caring for it. Stands securely on the table thanks to the non-slip feet Magnetic connectors for quick set-up and dismantling Easy to clean and maintain, and can be completely taken apart A sponge on the inside prevents a build-up of moisture.

Funnel BG

DIA MM
25
38
50
65
75
100
150 mm , Borosilicate

Spirogyra Cell

Description

A detailed instructive model mounted on board with key card.

Citical Radius Of Insulating Material

Citical Radius of Insulating Material: At particular radius of insulation over a cylinder, loss of heat is maximum. The unit consists of a G.I. pipe provided with plaster of Paris insulation on out side surface. Four pipes are provided with heater inside having input control. Input to heaters is measured by common voltmeter and ammeter, by controlling input to heaters, it is shown that critical radius of insulation is ratio of thermal conductivity and outside heat transfer co-efficient.

SPECIFICATIONS:

1.G. I. Pipes with electrical heater inside – 4 Nos. 2.Insulation over the pipes of different thickness. 3.Controls and Measurements – a) Dimmerstat to control heater input – 4 Nos. b) A voltmeter and ammeter to measure inputs to heater. c) Digital temperature indicator to measure temperatures across insulation. d) Necessary switches and controls. A technical manual accompanies the unit.

SERVICES REQUIRED:

230 V, 5 Amp., A.C., Supply with earthing connection. Floor Area of 1 m. X 1 m X 1.5m. height.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Burettes with Screw Type, PTFE Needle Valve Stopcock, Class ‘B’

Capacity mlGraduation IntervalTolerance ± ml
10.010.01
20.010.02
50.020.02
100.050.05
250.10.1
500.10.1
1000.20.2

Flask Kjeldahl with Socket

Capacity mlSocket Size
5019/26
10019/26
10024/29
30024/29
50024/29
80024/29
80029/32

Analog PID Controller

The analog PID controller is a special purpose analog controller with operational amplifiers The controller permits a detailed analysis of the application of proportional, integral and derivative control to the improvement of their performance. The controller may be used at high speed for oscilloscope observation or at a low speed for meter observation.

FEATURES:

• Two analog meters (centre zero meters) to display the set variable and process variable. • In built regulated power supply. • Provision to vary and measure the setpoint (0-5)V • Provision to vary the proportional gain, Integral time and derivative gain. • Provision to give either (4-20)mA or (0-5)V externally as a process variable. • Provision to select the controller output as (4-20)mA or (0-5)V internally. • All the components are mounted in an attractive cabinet. • Interface with any realtime process (Level, Flow, Temperature, Pressure, DC motor speed control etc.,)

Dissecting Microscope

Specifications

Microscope with round base is designed for greater stability. Having joint revolving arm for moving the magnifying lens over the stage allowing the whole stage are to be scanned. Focussable by Rack and Pinion. Detachable rests on either side of the stage provided steadying support for hands during fine dissection. Illumination by plano concave mirror in fork mount. With dust cover duIy packed in styofoam case. (Wooden Box optional).
DrawtubeMonocular
Eyepiece10X
Objective4X
''ADARSH' make dissecting microscope extends top quality optics and uncompromising performance for education and research work.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Angel Property of Cyclic Quadrilateral

To teach sum of 4 angle of quadrilateral is 360°. This manipulative provided with cutout of angles from Quadrilateral. Provided with magnet at back to demonstrate on magnetic board. Diameter 21cm

Spring Extension, Steel

For demonstrating Hook's Law. Spring Extension 15x55 mm. length.

Conical Flask

Our superior quality Conical Flasks are made up of polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the Conical Flasks contamination free and makes the flask leak proof. The threads of the Conical Flasks should be disengaged before autoclaving. Material : Polypropylene
ParticularsPack (Pcs) 
Conical Flask 100 ml12 
Conical Flask 250 ml12 
Conical Flask 500 ml12 

Digimatic Micrometers ( DMM 01)

Description

Micrometer is used to measure short lengths accurately Technical Details : With Friction Thimble Carbide Tipped Measuring Faces Blue Metallic Finish Frame With Locking Clamp and ratchet stop Least Count : 0.001mm Sizes 0-2 25-50 50-7 75-100 Specifications: Guarante6 Months without abuse Packin Plastic Box Calibrati In house.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture