XTEMOS ELEMENT
AJAX PRODUCTS TABS
Parallelogram of Forces Apparatus wooden
Cyclone IV FPGA Controller
FEATURES:
• Based on Altera family Cyclone IV, Device : EP4CE30 • One 34 pin header used for IPM Interface. - 16 PWM output - 8 capture inputs. • One 26 pin header ADC. - 4 channel 1MSPS ADC. - Total 8 channel using 2 Nos of ADC. - 12 bit resolution. - Input range -10V to 10V / -5V to 5V. • One 5 pin phoenix connector DAC - 4 channel DAC, 12 bit resolution. - Output range -10V to 10V / -5V to 5V. • 8 output Light Emitting Diodes (LEDs). • 8 input slide Switches. • 4 user push button switches. • 2-user limit switch. • 20 x 4 Alphanumeric LCD display. • On Board Isolated JTAG Programmer Compatible with QuartusII software. • Isolated USB (USB to Serial) interface. • 3 Nos of 20 pin header each have 16 IOs.
Rheostat, Protected With Single tube
Set of Springs
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Evolution
Cytology
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Cell Membrane showing structure & functions Cell Wall, showing structure & functions Endoplasmic Reticulum showing structure & functions Mitochondrion – showing structure & functions Golgi Complex showing structure & functions Chloroplast – showing structure & functions Nucleus – showing structure & functions Chromosome – showing structure & functions D.N.A. – showing structure & functions R.N.A. – showing structure & functions
RF Telemetry
RF telemetry system consists of a radio frequency transmitter and matching radio frequency receiver both operating at 433 MHz. The system is designed for the radio frequency transmission and reception. The radio frequency transmitter sends out a variable audio signal and the radio frequency receiver with built in loud speaker receives the signal. The system enables the teachers to demonstrate a variety of wave phenomenon. The system also enables the properties of the radio communications to be investigated and compared with those of visible light and other wave motions such as audible sound and water waves etc. For the operation of the system, a 9 V PP3 battery is required.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Spherometer Laboratory
Worm Sector Type Steering System
Worm & Sector Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Water Cooler Trainer
The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell. The stainless steel water tank is provided with insulation on air Sides and a door are provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a bail-operated top. Various measurements provided enable students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.
SPECIFICATIONS:
Cooling Cycle a) Compressor Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-12 refrigerant. b) Finned tube type air colled condenser with forced air flow. c) Filter cum drier for refrigerant. d) Capacity expansion device. e) Evaporator coil embraced on stainless steel water tank, Provided with glass wool Insulation. 2.Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top. 3.Measurement a) Pressure gauges for evaporating and condensing pressure. b) Thermometers to measure refrigerant temperatures at inlet and out let of condenser and evaporator. c) Dial type thermometer for water temperature. d) Rotameter to measure liquid refrigerant flow. e) Energymeter to measure compressor Input. 4.Safely & Controls – a) Thermostat to put off compressor at set water temperature. b) Pressostat to put off compressor if high or low pressure Goes out of set limit. c) Over load protector for compressor, A technical manual will be supplied along – with the unit. Also, the unit is provided with an attractive and anti corrosion powder costing.SERVICES REQUIRED:
1.Floor space of 1.5 m. X 1.5 m. 2.Water supply of 5 lit/min, 3.230 V, 15A AC stabilized supply with earthing connection
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Magnetic Stirrer with Hot Plate
Maximum speed 1200 RPM.
Suitable for stirring all volumes, supplied with a teflon coated magnetic stirring bar.
Particulars
Magnetic Stirrer with Hot Plate, Volume 2 litre Magnetic Stirrer with Hot Plate, Volume 5 litreFeatures
Automation Type : Automatic Material (Body) : Mild Steel Material (Top Plate) : Stainless Steel Phase : Single Phase Power : 220 V Frequency : 50 Hz
2 Stroke 1 Cylinder Petrol Engine Manual Driven
The engine will be sectioned to show the internal constructional details. The working of individual part and accessories like Valves, Pistons, pumps, Crank and Camshaft, etc. will be demonstrated. It is provided with Flywheel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes. The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Forceps (Different Types)
Three Phase Transmission Line Fault Analysis Trainer
Three phase Transmission line fault Simulation Study Module
Specification
• 3 phase power supply from 3 phase generator • To simulate 3 phase balanced system fault and unsymmetrical faults • Fault study with single line and double line in 3 phase system • Faults : - L-G-Fault - L-L-Fault - L-L-G-Fault - Single Conductor open fault - Double Conductor open fault - Fault through impedance • Theoretical calculations and verification with practical results. • The transmission lines are simulated by high frequency Inductance & resistance for short, medium and long line.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Stereo Zoom Microscope
Specifications
| Magnification | : | 20x & 40x or 30x and 60x | |
| Eyepiece Lens | : | Wide Field 10x or 15x Paired Eyepiece | |
| Objective | : | 2x and 4x (Turret Type Revolving) | |
| Focusing | : | Vertical movement with rack & pinion, Tension control knob & stroke 50 mm | |
| Inclination | : | 45° | |
| Tube Rotation | : | 360° Rotatable, Removable |
Accessories
Rubber Eye Guard. LED Light Illuminator or Flurescent Ring Illuminator.
Six Phase Power Analyzer
Specification
• 6 phase measurement @ 50Hz • 6 voltage inputs (250V AC max., 50Hz) & 6 AC current inputs (5A max) • Zero crossing output for both voltage and current waveforms • 6Nos of phase sensing circuits provided to measure the phase difference of 2 waveforms • Signal Conditioning for Torque & Speed (QEP, Proximity, Optical) • After Signal Conditioned, 6 voltage outputs, 6 current outputs, 12 zero crossing outputs & 6 phase sensing outputs are terminated at 34 pin and 26 pin FRC connectors • Power input through banana sockets • Housed in a sleek cabinet
Desert Cooler Trainer
Desert Cooler Trainer works on the principle of evaporative cooling. It is used mostly in the dry hot regions; it consists of a fan which sucks the air from atmosphere through the pads which are used in desert coolers very frequently. The difference in DBT & WBT at inlet and outlet can be measured hence the RH from the charts. Also the amount of water evaporated can be calculated by knowing the water level difference in the reservoir.
SPECIFICATIONS:
1.Fan connected to 1/2 HP motor. 2.Air Cooler Pump to circulate water. 3.DBT & WBT Measuring Thermometer at inlet and outlet. 4.Orifice meter with manometer to measure the air flow. A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor Area – 1, X 1 m. X 1 -5m. Height. 2.220 V., 15 Amp. , Single Phase Stabilized power supplyXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Shunt Active Filter Trainer
Specification
• FPGA Spartan 3A DSP board used for generating the PWM signals. • Three phase 3 level diode clamped inverter used as a Active filter. • SRF (or) Instantaneous PQ theory will be used to generating reference current. • PI control or fuzzy logic will be used to regulate the dc link capacitor voltage. • Reference DC link Voltage will be 250V. • Hall effect current transducers used to sense the source currents, load currents and compensation currents. • Hall effect voltage transducers used to sense the dc link voltage and source voltages. • Necessary source inductor and filter inductor provided. • Input source Line voltage -200V (Peak). • Input source Current -10A (Peak). • Power Rating -3KW. • Reactive power compensation can be provided. • 3KW linear and non-linear loads will be given. • User can modify source, filter inductance and external loads. • User can modify control algorithm. • Industrial type cabinet provided. • Before compensation source current THD will be greater than 26% • After compensation source current THD - 2.5 - 4% in 3 level inverter - 4 - 5% in 2 level inverter
Porcelain Mortar & Pestle
Description
Adarsh present optimum quality Porcelain Mortar & Pestle. The Mortar is provided with lip, glazed outside except bottom and unglazed inside. Pestle unglazed at grinding surface & glazed upwards for hand comfort in grinding.| Mortar Top ID (mm) | Mortar Top OD (mm) | Capacity (ml) | Mortar Height (mm) | |
|---|---|---|---|---|
| 60 | 80 | 60 | 44 | |
| 75 | 90 | 100 | 48 | |
| 85 | 105 | 150 | 70 | |
| 100 | 125 | 275 | 70 | |
| 125 | 155 | 550 | 88 | |
| 150 | 180 | 900 | 100 | |
| 175 | 200 | 1500 | 115 | |
| 200 | 230 | 2000 | 140 | |
| 250 | 285 | 4200 | 175 | |
| 300 | 300 | 7000 | 205 | |
| 350 | 400 | Available on demand | ||
| 400 | 450 | Available on demand |
Mounted Joule Meter
Description
A domestic electricity meter adopted to operate single-phase 2, wire C1.2mAx8.33 A 12V 50 Hz. 0.01 rev./J and dials reading in joules. The meter is mounted on a wooden bench stand input and output socket terminals. The aluminium disc rotates once for every 100 Joules with the consumption recorded on three digits calibrated 100, 1000 and 10000 joules per division respectively. The instrument records a maximum of 99,900 Joules.
Level Control Measurement Module
This module consists of a process tank with a miniature pump, level sensor for 2 levels, a power supply, etc., To establish a ON/OFF control for the level of water. Circuitry is provided for stand alone operation or through a 8255 port of a Microprocessor kit.
Specification
• A transparent tank of height 150mm with adjustable electrodes to vary the high level and low level. • A pump with tank for water circulation • Water level can be monitored under software control/automatic mode • One power relay 230V/6Amp for pump ON/OFF control • Miniature connectors are provided to operate as stand alone controller or through software under a Microprocessor trainer. • Built in power supply.
Transducer Trainer
Specification
• RTD acts as a temperature sensor • Strain gauge based load cell • Linear variable resistive transducer • LDR, Photo diode, photo transistor • Precision servo potentiometer • Inductive type proximity sensor • Heat source, Filament lamp, Buzzer • 3½ digit LED display • Analog type 10V Center-Zero meter • Inverting and Non-inverting amplifier • Amplifier with Gain and offset control • Instrumentation and summing amplifier • Low pass filter • Precision Rectifier • Timer and buzzer oscillator • Electric switch
Trinocular Microscope
| Viewing Head | : | Trinocular Head Inclined at 45°, 360° Rotatable; 55-75mm interpupillary distance. Digital Camera or Digital Screen can be to the trinocular head. | |
| Eyepiece | : | Paired Wide Field 10x, WF 15x. | |
| Nosepiece | : | Quadruple Nosepiece. | |
| Achromatic Objectives | : | 4x, 10x, 40x (SL), 100x (SL, Oil Immersion). | |
| Stage | : | Stage is fitted with co-axial mechanical stage. | |
| Focusing | : | Coaxial coarse & fine focus knob. | |
| Condenser | : | Two lens abbe condenser NA 1.25 with iris diaphragm, filter holder and blue filter, movable by rack and pinion mechanism. | |
| Illumination | : | LED Illumination with adjustable intensity. |
Hydraulic Power Steering System Motorised
Hydraulic Power Steering System (Motorised) – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
