XTEMOS ELEMENT
AJAX PRODUCTS TABS
Prismatic Compass
Description
• Made of Aluminium/brass. • Size 100mm, 125 mm, 150 mm dia. • Complete in Case with Aluminium Telescopic/Rigid/Wooden Tripod. • Aluminium circle consist of a needle graduated to 30min (0.5) graduations. • Painted with water proof paints. • Carrying cases are made of Fibre with carrying straps. Least count 30'.
Car Chassis Rear Wheel Drive Actual Cut Section Motorised
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Balance Spring
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Acrylic Prism Set
Telegraph Kit
Description
Students can discover how people communicated long distances before the telephone with the Telegraph Kit, students can learn Morse code and even send a secret message to a friend. Kit includes: D cell battery holder, contact key, light bulbs, alligator connector cords, buzzer and instruction manual
Magnetic Kit
Description
A kit of magnets and accessories in a storage tray.Contents :
1. One Horseshoe magnet, 100 mm, with keepers.Two ceramic bar magnets, 75 mm long. 2. Three ceramic ring magnets, 38 mm diameter 3. Two plotting compasses clear both sides, 19 mm diameter 4. One lodestone specimen. 5. One pack Iron Filing. 6. One each strip of Iron, Aluminium, Zinc and Copper metal.
Petri Dish Rack
We offer comprehensive range of Petri Dish Rack to our valuable clients.
These Petri Dish Racks are clear acrylic construction with polycarbonate posts.
Our range of Petri Dish Rack has a capacity to hold 60 petri dishes of 90 mm size while Petri Dish Rack can hold 56 petri dishes of 60 mm.
Useful during inoculation, incubation & storage, Petri Dish Rack enables the culture to be seen & checked during.
Material : Polymethyl Methacrylate / Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Rack For 90 mm Petri Dish | 2 | |
| Rack For 60 mm Petri Dish | 2 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Storage Vial
These polypropylene vials add to the existing range of Polylab storage vials.
Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring which makes it a leak proof vial.
These vials are also used for the storage of biological material, animal & human cells etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail 2.0 ml | 500 | |
| Storage Vail 5.0 ml | 500 | |
| SV - 10 ml | 500 | |
| SV - 5 ml | 500 |
Human Heart ,4 parts
Calorimeter Stirrer, Aluminium
Laboratory Ice Bucket
We are the Exporters and Traders of Laboratory Ice Bucket.
Our range of Laboratory Ice Bucket is highly appreciated in the market.
This Laboratory Ice Bucket is made of a durable rigid material bearing excellent insulating properties.
Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Lee Bucket | 1 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Pelton Wheel Turbine Test Setup
DESCRIPTION:
Pelton Wheel Turbine is only impulse water turbine now in common use named in honor of Sir L.A. Pelton (1829-1908) of California, USA. It is a tangential flow impulse turbine. The water strikes the buckets along the tangent of the runner. The energy available at the Inlet of the Turbine is only kinetic energy. The Pressure at the Inlet and Outlet of the atmospheric. This turbine is used for high heads. The Present Set-up consists of a runner. The buckets are mounted on the runner. The water is fed to the turbine, through SS nozzle with a SS spear, by means of Centrifugal Pump, tangentially to the runner. Row of water into turbine is regulated by adjusting the spear position by the help of a given hand wheel the runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is providing with a transparent acrylic sheet for observation of flow on to the buckets. This runner assembly is supported by rigid MS structure. Load is applied to the turbine with the help of this brake dynamometer so that the efficiency of the turbine can be calculated. Pressure Gauge is fitted at the Inlet of the turbine to measure the total supply head to the turbine.EXPERIMENT:
1.To study the operation of a Pelton Wheel Turbine 2.To determine the Output Power of Pelton Wheel Turbine 3.To determine the Turbine EfficiencyUTILITIES REQUIRED:
● Water Supply and Drain.● Electricity 15 kW, 440V AC, Three Phase
TECHNICAL SPECIFICATIONS:
| MODEL | HM 111 (1.33 HP) | HM 111 (2 HP) | HM 111 (5 HP) |
| Output Power | 1.33 HP / 1 Kw | 2 HP / 1.5 Kw | 5 HP / 3.75 Kw |
| Discharge | 300 LPM (Approx.) | 400 LPM (Approx.) | 630 LPM (Approx.) |
| Supply Head | 25 m | 40 m | 45 m |
| Rope Brake Dynamometer | Dia 200 mm | Dia 200 mm | Dia 300 mm |
| Sump Tank | Capacity 150 Liters. | Capacity 200 Liters. | Capacity 300 Liters. |
| Water Circulation Centrifugal Pump | Capacity 5 HP, Three Phase | Capacity 7.5 HP, Three Phase | Capacity 15 HP, Three Phase |
| Speed | 1000 RPM (approx.) | ||
| Impeller | Material Brass, Bucket type | ||
| Nozzle | Material Stainless Steel/Mild Steel | ||
| Spear | Material Stainless Steel/Mild Steel | ||
| Discharge Measurement | Pitot Tube with Manometer | ||
| Control Panel | Star/Delta Starter, Mains Indicator, MCB for overload protection | ||
| The whole set-up is well designed and arranged in a good quality painted structure. | |||
Meter Scale, Hardwood
Emitting Diode (LED’s)
Bridge rectifier is designed with four LEDs internally arranged in bridge pattern fitted inside a plastic moulded case. Two LED’s are red and two LED’s are green. This device is used to demonstrate the functioning of a bridge rectifier, i.e., to convert alternating current (AC) into direct current (DC). Two yellow sockets are used for AC input. Two sockets, one red and one black, are used for DC output. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
Dissecting Trays
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Worm Sector Type Steering System
Worm & Sector Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Test Tube Basket
We are the prominent Test Tube Basket Exporter and Trader, based in India. Our Polylab Test Tube Basket are made up of Polypropylene. These autoclavable, unbreakable and non-corrosive Test Tube Basket are ideal for rinsing and draining glassware. Our Test Tube Basket is also useful for storage of test tubes or culture tubes during sterilization or incubation.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Test Tube Basket 140 x 120 x 110 mm | 6 | |
| Test Tube Basket 160 x 160 x 160 mm | 6 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Laser Reflection and Refraction Tank
Description
Laser Reflection and Refraction Tank demonstrates the principle of reflection and refraction. The clear circular acrylic tank has a circular scale graduated on the white base of the tank, making it easy to measure angles. Adjust the pivot-arm mounted laser to any angle along its full 360° range and measure the angle of reflection or refraction. Rotate the laser and observe first a reflected ray, then both a reflected and refracted ray, and finally just a refracted ray. Leveling screws on the tank’s base make leveling quick and easy. The laser is attached to the pivot-arm by a magnet and can be removed for use in other experiments. Instructions included.
Episiotomy Training Simulator
Description
Suturing Simulators provide a realistic way for students to learn good surgical techniques. The simulators provide students with a variety of repair experiences without the constraint of time and concern for safety, which are factors with a live patient. The simulators can be used by the student in a learning lab with an instructor or by the student individually in the clinical setting just prior to a patient experience. They are also useful as homework teaching aids that can be signed out at night and returned the next day. In addition to being portable, the lifelike texture allows the learner to develop a “feel” for instrument handling, tension on suture, and the advantages of one method of tying knots over another.Includes one of each simulator:
Midline Suture Simulator Left Mediolateral Suture Simulator Right Mediolateral Suture Simulator Each simulator comes with an instruction booklet and is individually boxed.
Single Stage Air Compressor Test Rig
The test rig comprises of a Single stage air compressor fitted with an air tank with orifice, pressure gauges, and an energy meter to measure the input & a Temperature indicator measures the temperatures at various points. The compressor is mounted on air receiver along with the motor, and is provided with air relief valve (safety) and a pressure switch. The unit determines volumetric efficiency and isothermal efficiency at various discharge pressures
SPECIFICATIONS:
1.Air compressor – Single cylinder, Single stage type driven by a 2 hp. Three phase motor mounted on air receiver provided with delivery valve. 2.Air tank and orifice with water manometer for air intake measurement. 3.Pressure gauge to measure the discharge pressure. 4.Digital temperature indicator. 5.Energy meter to measure input power. 6.A technical manual accompanies the equipments .SERVICES REQUIRED:
1.Floor space of 2.5 X 1,5m. 2.440 V, 15A, 3ph. AC supply with neutral and earthing connection. 3.A hand tachometer.
Bar Breaking Apparatus
Description
To show the forces which can be exerted during thermal expansion or contraction. Comprising a heavy cast iron frame 340x120x100mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.
