XTEMOS ELEMENT
AJAX PRODUCTS TABS
Orbital Shaking Incubator cum B.O.D
Specification
Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.Optional Accessories
Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).Size
16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.
Brush, Bottle
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Laser Distancing Meter
Description
Laser Distancing Meter The professional Laser Distance Meter is designed to give special users a high accuracy, one person distance measuring and estimating tool measure remote and difficult reaching places. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation make measuring fast and very reliable. The last 20 measurements are also stored. Simple to Operate: Due to the shortcut keys addition and subtraction, as well as surface and volume calculations could be easier. Features : Area, Volume Calculations Indirect measurement using Pythagoras Addition/ Subtraction Continuous Measurement Min/ Max. Distance Tracking Display illumination and multi-line display Buzzer indication Multifunctional end pieces.
Dissecting Dishes, Aluminium
Pneumatic Trainer Basic
LIST OF EXPERIMENTS
1.Operation of a Single Acting Cylinder 2.Speed Control Of Single Acting Cylinder 3.Operation of a Single Acting Cylinder with And Gate 4.Operation of Pneumatic Motor 5.Speed Control of Pneumatic Motor 6.Operation of D/A Cylinder with 5/3 Way Lever Operated DC Valve 7.Speed Control of D/A Cylinder with Flow Control (Meter In) 8.Speed Control of D/A Cylinder with Flow Control (Meter Out) 9.Speed Control of D/A Cylinder with Flow Control in Forward & Return Stroke 10.Sequencing of Motor & Double Acting Cylinder 11.Sequencing of D/A Cylinder with Single Acting Cylinder 12.Operation of Single Acting Cylinder with 5/2 Way Single Solenoid 13.Operation of Double Acting Cylinder with 5/2 Way Single SolenoidSALIENT FEATURES
1.Mobile self contained unit. 2.Simplicity of operation and designed for immature use. 3.Industrial components and circuits are demonstrated in the circuit. 4.Pneumatic valves of Shrader / Festo/ SMC or equivalent only. 5.Performance Guarantee of two years for any manufacturing defect. 6.Modular design with fitment of component at any corner of trainer. 7.Specially designed quick coupling.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Multi Functional I.V. Training Arm
Description
The I.V. Injection Arm P50/1 made of silicone, is unique in quality and design and allows realistic training to teach competence to medical staff. It is also very suitable for group instruction because of its high quality, stain resistance and easy-to-clean soft material.It is ideal for practicing the following:
Correct puncture of peripheral veins for blood sampling. The following veins can be punctured: basilica vein, cephalic vein, median cubital vein, dorsal venous rete of hand Intravenous injections Positioning of a butterfly catheterDelivered in deluxe storage carton with:
1 injection arm with already mounted tubing system 1 infusion bottle 1 stand 1 bottle of artificial blood concentrate(250ml) 1 plastic cup 1 disposable syringe and 2 injection cannulas (recommended cannula size: 20 and 21 gauge) 2 tubing systems as replacement parts 1 container of talcum powder
Dicot Stem Anatomy T. S. & L. S.
Description
This model shows the transverse and longitudinal section of a dicotyledonous stem in which case the cambium ring has been formed but no secondary growth has yet taken place. Useful model for study of epidermis, lentice , cork layer, cork cambium, cortical parenchyma ,starch sheath, medullary rays, phloem, sieve plate, sieve tube, phloem parenchyma and inter fasicular cambium ,xylem, pitted vessels, bordered pitted vessels, annular vessels, spiral vessels, pith etc. Mounted on base, with key card.
Sets of metal discs
Description
For demonstrating that some metals are magnetic whilst others are not and for general ‘Metal Identification’ exercises. Comprises sixteen discs, 25 mm. diameter 2 each of Mild Steel, Stainless Steel, Brass, Zinc, Nickel, Silver, Bronze, Aluminium and copper. One of each is stamped with the name of metal. the other is unmarked.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Human Tooth Set
Verification Clarke S Maxwell Reciprocal Theorem
Apparatus for Verification of Clarke’s Maxwell Reciprocal Theorem
Apparatus consist of a mild steel beam 100cm long and 1.25cm x 4mm in cross section with graduations at every 10cm along the length. It should be supported on two knife edge supports 70cm apart with a 30cm overhang on one side. Reciprocal theorem can be verified by direct measurements of the deflections of various points with the help of a dial gauge due to a load placed at the reciprocal points. A dial gauge with 25mm travel (with a magnetic base) should be supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights.
Experimental Capabilities: To verify Clerk’s Maxwell reciprocal theorem by means of a mild steel be
Exterior Angle of Regular Polygan
Siemens IoT 2020 Gateway
Specification:
• SimaticIoT 2020 Educational Intelligent gateway • Intel Quack Soc x 1000 • 400MHz operating frequency • Micro SD card slot, upto 32GB • 512MB RAM, 8MB Flash, 256KB SRAM • One USB controller and one USB device • FTDI USB to serial Interface • One no of 10/100Mbps Ethernet • Arduino Uno R3 compatible expansion slot • One mini PCIe expansion slot for WLAN/additional Ethernet port • Yocto V2.1 based Linux operating system • Input supply 24V DC • Programming in high level language • Support for various protocols like Modbus RTU, POC UA and cloud protocols like MQTT/AMQPXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Laminar Air Flow
Product Details
| Material | : | STAINLESS STEEL |
| Model | : | Horizontal |
| Switches | : | Processor based switches for blower, LED light & UV light With LCD back light display. (UV light with Timer) |
| Pre-filter | : | 99.00% down to 5 micron. |
| HEPA Filter | : | 99.97%-99.99% down to 0.3 micron, Mesh guard for protection. |
| Airflow | : | Frontward Horizontally |
| Noise Level | : | 60 decibel ± 5%. |
| Velocity | : | 0.35-0.50m/sec. |
| Work Table | : | Made up of stainless steel 304gr. Cock for gas on work table. |
| Side Panels | : | 6mm±.5mm thick acrylic sheet. |
| Front door | : | Made of acrylic. |
| UV Lamp | : | 15/30W, make Philips Holland, |
| Illumination | : | LED White Light. |
| Pressure | : | Digital Manometer 0-50mm range with filter failure alarm. |
| Power Supply | : | 230V ± 10V/50 Hz single phase A.C. |
| Cabinet | : | 304 grade. Stainless Steel. |
| Heavy Duty Blower | : | Dynamically balanced with 0.25 HP Electric Motor Mounted on anti vibration pad 1440 RPM motor. |
Working Area Size
60x60x60cm. 90x60x60cm. 120x60x60cm. 180x60x60cm.
PIPETTE BULB
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Refrigeration Test Rig
Features
• 5 Nos of thermocouples are provided to measure the temperature at different points. • One multi channel temperature indicator is provided to display the temperature • One capillary tube and one thermo expansion valve is provided to check the performance separately. • Compressor supplies refrigerant through evaporator to find out cooling effect • 4 Nos. of Pressure Gauges are provided to measure the pressure at various point • One Energy meter is proivded to measure the overall power consumption • One voltmeter is provided to display the voltage. • One ammeter is provided to display the current.Specification
• Compressor :Hermatic • Capacity : 1/4 Ton • Supply : 230 V AC / 50 Hz • Condensor : 12 Coil • Evaporator : 15 Liter Capacity • Refrigerant : R134A
Flexible AC Transmission Systems
Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.
It consists of
• Generator Set-up (3Φ AC Source) • Simulated Transmission line • IGBT Based VSI Power Module • Series & Shunt Transformers with LC filter • RLC - Load setup • TMS320F2812 DSP Controller • Upgrade possibleGenerator Set-up (3Φ AC Source)
• 3 phase Alternator DC Motor Drive setup 3Φ / 1KVA / 1500 RPM / Salient Pole type coupled with 2HP/220V DC shunt motor and with suitable drive from 1Φ AC input supply with • suitable speed control, sensor and digital speed indicator. • Digital controller with IGBT based DC voltage controller for DC motor Armature Voltage variation 0-200V DC/10A & Alternator field voltage variation with necessary instruments • /meters/indicators.
Automatic Level
Description
a) Manufactured meticulously using International Standard. b) Tightly sealed construction for use in any weather. c) Fast accurate two-speed focusing. d) Friction-braked rotation and endless horizontal drive. e) Optical sight for quick pointing. f) Metal circular bubble. g) Fit all tripod with G5/8" or M16 screw.Optional accessories :
Metal or wooden tripod, metal or wooden staff range pole, measuring rope, plumb etc
