XTEMOS ELEMENT
AJAX PRODUCTS TABS
SCR VI Characteristics Study Trainer
Specification
• Basic VI characteristics study trainer. • Consists of one no. TYN612 SCR with heat sink. • LM723 based 20V DC power supply for gate voltage. • One no. potentiometer used to vary the gate current • 0- 30V DC variable power supply for anode, cathode voltage variation. • One no. potentiometer used to vary the Vak. • One no. high voltage fixed load resistor. • One no. toggle switch to ON/OFF gate voltage. • Two nos. DC ammeter, voltmeter/multimeter provided to measure Ig&Vak, Ia. • 230V AC input. Power ON/OFF switch. • All components are mounted on a screen printed PCB fixed on a nice wooden cabinets.
Ticker Tape Timer 12V
Ticker Tape Timer 12V
These devices use an electromagnet which activates a striker, producing dots via a carbon disk on the ticker tape.
With 4mm terminal sockets.
The dots are produced at a rate of 50 - 60Hz depending on the mains frequency.
There are 6V and 12v units available.
The Ticker Tape Timers are used in the measurement of velocity, acceleration and general timing.
Flow Over Weir Or Open Channel Apparatus
Flow Over Weir Or Open Channel Apparatus:
A ‘WEIR’ is the name given to concrete or masonry structure built across a river (or stream) in order to raise the level of water on the upstream side and to allow the excess water to flow over its entire length to the downstream side. Weirs may also be used for measuring the rate of flow of water in river or streams.
Different shapes of “WEIRS” generally used are sharp-crested weir, broadcasted weir and ogee shaped weir.
In the unit a centrifugal pump sucks the water from the sump tank, and discharges it to a small flow channel. The weir is fitted at the end of channel. All the weirs are interchangeable. The water-flowing over the weir falls in the collector. Water coming at from the collector can be directed to the sump or can be directed in to the measuring tank for measurement of flow.
SPECIFICATIONS:
[1] The unit is provided with following weirs: (a) Sharp-crested weir. (b) Broad-crested weir. (c) Ogee shaped weir. [2] Pump 1/2 H.P. monoblock. [3] Flow measurement – Measuring tank calibrated water flow meter is used. A technical manual accompanies the unit.SERVICES REQUIRED:
[1] Floor surface – 2.5 m x 1.5 m. [2] 230 v, 5 amp supply with earthing connectionXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Suppository Mould
Trinocular Microscope
| Viewing Head | : | Trinocular Head Inclined at 45°, 360° Rotatable; 55-75mm interpupillary distance. Digital Camera or Digital Screen can be to the trinocular head. | |
| Eyepiece | : | Paired Wide Field 10x, WF 15x. | |
| Nosepiece | : | Quadruple Nosepiece. | |
| Achromatic Objectives | : | 4x, 10x, 40x (SL), 100x (SL, Oil Immersion). | |
| Stage | : | Stage is fitted with co-axial mechanical stage. | |
| Focusing | : | Coaxial coarse & fine focus knob. | |
| Condenser | : | Two lens abbe condenser NA 1.25 with iris diaphragm, filter holder and blue filter, movable by rack and pinion mechanism. | |
| Illumination | : | LED Illumination with adjustable intensity. |
Mock Layout Of Car Wiring Latest Type
Mock Layout Of Car Wiring Latest Type
All the components used in the apparatus are of modern car. The complete mock layout is beautifully divided into 5 sections as under
(A) Front Lighting Panel
(B) Dash Board Panel
(C) Ignition System
(D) Rear Lighting Panel
(E) Motorised Charging System
With the help of this mock layout system its becomes very easy for the students to understand the actual working of electrical system of a modern car.
Lab Tubing Connectors
We are engaged in providing high quality range of Lab Tubing Connectors.
These Lab Tubing Connectors are sourced from highly reliable manufacturers who ensure the usage of high grade components for its manufacturing.
Our clients have always appreciated our range of Lab Tubing Connectors for its supreme quality and durability.
our Lab Tubing Connectors comes in a wide range which includes Cross Connector , Y Shaped Connector , L Shaped Connector and T Shaped Connector.
| Particulars | Pack (Pcs) | |
|---|---|---|
| T-Connector 6 mm | 36 | |
| Y-Connector 6 mm | 36 | |
| T-Connector 8 mm | 36 | |
| Y-Connector 8 mm | 36 | |
| T-Connector 10 mm | 36 | |
| Y-Connector 10 mm | 36 | |
| Cross Connector-6 mm | 36 | |
| Cross Connector-8 mm | 36 | |
| Cross Connector-10 mm | 36 | |
| L Connector-6 mm | 36 | |
| L Connector-8 mm | 36 | |
| L Connector-10 mm | 36 | |
| Pinch Clip | 12 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Microscope Glass Slides – Frosted
Voltaic Cell Set, Student
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
IoT Gateways
Projection Microscope
Specifications
Projection Microscope is a dual purpose instrument which is equipped with the halogen projection bulb that works efficiently on the power supply of 220AC. The device is fitted with the highly effective cooling fan inside the instrument. The device is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. The instrument is supplied complete with the vinyl cover in a packing of a cardboard box. It is easy to operate instrument that offers highly accurate test results. The instrument provides high-quality and clear images. The instrument is equipped with the fine grain glass screen which is provided to take the image on the screen or wall of the instrument with the magnification range up to 400X. It is a dual purpose instrument which is equipped with the halogen projection bulb. The works efficiently on the power supply of 220AC. The device is assembled with the effective cooling fan inside the instrument.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Petri Dish Rack
We offer comprehensive range of Petri Dish Rack to our valuable clients.
These Petri Dish Racks are clear acrylic construction with polycarbonate posts.
Our range of Petri Dish Rack has a capacity to hold 60 petri dishes of 90 mm size while Petri Dish Rack can hold 56 petri dishes of 60 mm.
Useful during inoculation, incubation & storage, Petri Dish Rack enables the culture to be seen & checked during.
Material : Polymethyl Methacrylate / Polycarbonate
| Particulars | Pack (Pcs) | |
|---|---|---|
| Rack For 90 mm Petri Dish | 2 | |
| Rack For 60 mm Petri Dish | 2 |
Ranging Rod Metal
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Window Air Conditioning Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Drilling Tool Dynamometers
This is a armed wheel type strain gauge drill tool dynamometer designed to measure thrust and torque during drilling operation. This Dynamometer is suitable for drilling a hole up to 25mm size in mild steel. With this Dynamometer students can study the change in these force by varying speed, cut and feed
FEATURES:
1.Rigid in construction & Sensitive transuding and amplifying system for accuracy in force measurement. 2.Compact two channel digital force indicator. 3.Use of cutting fluid during operation is possibleSCOPE OF SUPPLY:
1.Mechanical sensing unit and work piece holder with strain gauges. 2.Control panel housing digital force indicator to measure both forces simultaneously, balancing potentiometer, connoting cables. 3.Necessary switches, fuses and screen printed front plate. 4.The dynamometer is calibrated at factory with help of proving ring and readings are directly in the from of kg.
DC Network Analyzer
Specification
• Here we provide the bi-polar Transmission Line. • Simulated long, medium & short distribution lines selectable by patching in various length of DC Transmission line • Two no of bi-polar DC generator sources with ON/OFF control and voltage regulator potentiometer. - Two wire or Three wire Transmission Line operated in +12V DC - Each DC generator are independently control by potentiometer. • 2 digital voltmeters and ammeters provided in the input side and 2 digital volt meters and ammeters are provided in the output side • of transmission line to read the input & output parameters of transmission line. • One no of microcontroller based measuring system provide to read the input and output parameters. • 4 nos of digital ammeters provided to read the load current • 4 nos of resistive load and 4 nos of lamp loads are provided to load the transmission line.
Plane Table
Description
The Plane Table Surveying Instruments include standard accessories like Trough Compass, Spirit level, Canvas cover, Plumbing Fork etc., and is also with a fitted tripod. Uses of Plane Table in Engineering Surveys: • Maps preparation • Recording topography Accessories included in Plane Table Surveying Instruments: • Plane Table Board 750 x 600 mm, thickness 22mm & 16mm • Carrying Bag for Board • Teak wood Polished Stand • Stand Rigid Brass Head & Plate, • Magnet Trough compass brass • Spirit Level brass • Sight van 24" • Plumbing Fork • Plumb Bob
Measuring Cylinder (Hexagonal Base)
We bring forth high quality Measuring Cylinder (Hexagonal Base) for our esteemed clients.
The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.
These Measuring Cylinder (Hexagonal Base) are high on demand for their quality.
We source them from reliable manufacturers.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Cylinder 10 ml (Hexagonal) | 24 | |
| Measuring Cylinder 25 ml (Hexagonal) | 12 | |
| Measuring Cylinder 50 ml (Hexagonal) | 12 | |
| Measuring Cylinder 100 ml (Hexagonal) | 12 | |
| Measuring Cylinder 250 ml (Hexagonal) | 6 | |
| Measuring Cylinder 500 ml (Hexagonal) | 4 | |
| Measuring Cylinder 1000 ml (Hexagonal) | 3 |
