XTEMOS ELEMENT
AJAX PRODUCTS TABS
Wheel And Axle, Simple Form
Wooden double wheeled pulley
Consisting of a wooden double wheel with flat-bottomed grooves, 150 and 50 mm diameter respectively.
The wheel is pivoted on a spindle 10 mm diameter which projects for a distance of 100 mm so that the apparatus may be clamped to a normal retort stand.
The apparatus is supplied complete with two hooks and 6 meters of cord but without masses and stand.
Ripple Tank
Description :-
Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet.
The tank edges are shaped to minimize undesired reflections.
Tank has a drain hole closed by a rubber stopper.
With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height.
The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam.
The motor has an eccentric weight which causes the beam to oscillate.
Two point sources are provided by two plastic spheres, each mounted on a right angle rod.
A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant.
Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm.
Complete with following accessories :-
1. Two straight obstacles of aluminium alloy length 130 mm.
2. One straight obstacle length 40 mm.
3. One curved reflector radius 200 mm.
4. One trapezoidal plastic plate for refraction.
5. One wood hand wave roller.
6. One water dropper.
7. One pkt. rubber bands.
8. One foam plastic sponge.
9.One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod.
Masses Aluminium
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Rheostat
Description
These linear variable rheostats are mounted inside protective cover. The wire is wound on a ceramic tube. Three 4 mm safety socket terminals are provided for connection so the rheostat can serve as variable resistor as well as voltage divider.| Resistance | Max current | |
|---|---|---|
| 0-10Ω | 4 Amp | |
| 0-33Ω | 3.1 Amp | |
| 0-100Ω | 1.8 Amp | |
| 0-330Ω | 1 Amp | |
| 0-1000Ω | 0.57 Amp |
PCR Tube Rack
We are one of the prime Exporters and Traders of PCR Tube Rack .
Used for keeping PCR Tubes, Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene.
PCR Tube Rack facilitates the use of multipipetters.
A number of racks can be stacked together to save shelf space.
Material : Polycarbonate / Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| PCR Tube Rack (Rack for 96 PCR Tubes of 0.2 ml | 4 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Formation Of Rocks
Dissecting Trays
Spectroscope
Description
Hand held simplest form of spectroscope. It can be used to get a general idea of the correlation between wavelength and observed color. A diffraction grating is used which spreads the incident light into its component wavelengths. An illuminated reference scale against which the spectrum may be viewed is also provided. Spectroscope (Wooden)
Bottle Filling Module
Specification
• One proximity sensor to detect the bottle presence • Opto coupler sensor to detect the bottle position. • A mechanical base fixed with stepper motor and gear mechanism provided to hold 5 bottles and rotate in circular motion. • A tank is provided to store the liquid. • One solenoid valve to control the volume of liquid flow into the bottle. • One Reservoir tank with FHP pump to feed the water to supply tank. • Two magnetic switches provided to maintain the level of water in supply tank.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Half Wave / Full Wave And Bridge Rectifier Apparatus
Objective : To study Efficiency and Ripple factor in case of Half wave, Full wave and Bridge rectifier on application of load and filters.
Features : Instrument comprises of AC Power Supply, 3 meters to measure Output Voltage, Output Current and ripple factor on electronic AC Voltmeter, 4 PN Junction Diodes, Filter Circuit kit, load Resistances selectable using bandswitch and all important connections points at 4mm Sockets.
Optional Acc : Digital AC millivoltmeter.
Telescopic Alidade
Outside Micrometers (Etching Marking)
Description
Micrometer is used to measure short lengths accurately Technical Details : ; Carbide Tipped Measuring Faces ; Blue Metallic Finish Frame ; With Locking Clamp and ratchet stop ; Printed Marking on the Vernier Scale ; Least Count : 0.01mm/0.001” Sizes Sizes 0-25 0-1” 25-50 1-2” 50-75 2-3” 75-100 3-4” 100-125 ; 125-150 ; 150-175 ; 175-200 ; Specifications: Guarantee ; 6 Months without abuse Packing ; Plastic Box Calibration ; In house.
Car Chassis Rear Wheel Drive Actual Cut Section Motorised
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Linear Expansion
Description
Apparatus is fitted on heavy channel base, at one end of which is an adjusting screw, at the opposite end is a micrometer screw reading to 0.01 mm for measuring the expansion. Supplied with one each of aluminium, brass and iron expansion rods but WITHOUT thermometer. Consisting of metal rod 500 mm in length and 4.5 mm dia. enclosed in a well - lagged, metal tube with three tubules for steam inlet, outlet and thermometer. The metal rod to be investigated is supported in the steam jacket by detachable rubber bungs situated at each end of the tube.
Slide Mailer
We present to our esteemed clients, Slide Mailer.
The Slide Mailer is the best option to carry prepared slides from one place to another.
Moulded in Polypropylene, these Slide Mailers are available in three sizes i.e.1, 2 & 5 slides.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Slide Mailer - 1 Slide | 25 | |
| Slide Mailer - 2 Slides | 25 | |
| Slide Mailer - 5 Slides | 25 | |
| Slide Mailer - 10 Slides | 25 |
Distillation Plant (Manasty Type), Wall Hanging
The unit is recommended for making pyrogen fee distilled water of a very high degree of purity, Made out of S.S. special kettle element is fitted with Ejection Device / Auto cut for safety of the element is provided water supply is stopped.
The cork fitted to the unit is of brass C.P.A. wall Mounting clamp is provided with the unit.
Supplied with cord and plug to work on 220/240 volts A.C. Stainless Steel, Output approx. 3/4 Ltr./Hr.
Stainless Steel, Output approx. 5/6 Ltr./Hr.
Aluminium Dicasted, Output approx. 3/4 Ltr./Hr.
Aluminium Dicasted, Output approx. 5/6 Ltr./Hr.
Burner Bunsen, LPG
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Centrifugal Blower Test Rig
The apparatus consists of a spiral casing, which houses an impeller. Impeller is driven by a variable speed D.C. motor. Three, interchangeable impellers, viz. Radial forward and Backward curved vanes are provided with the unit. Digital indicators are provided for speed of impeller. A venture provided measures the discharge. Thus students can evaluate the performance of different impellers at various speeds.
SPECIFICATIONS:
1.Blower – Spiral casing with three interchangeable impellers viz. forward, backward and radial vanes. 2.Drive Motor-1 HP DC motor, 3000 RPM with Dimmer control to vary the speed from 300 to 3000 RPM. 3.Digital Speed indicator for speed measurement. 4.Ventura with water manometer to measure air flow. 5.Water manometer to measure discharge pressure. 6.Discharge pipe with flow control valve. 7.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor space of about 2m X 1.5m X 1.5m height. 2.230 V. 5A., 50 Hz, AC Supply.
Rain Gauge
Description
Rain gauge is designed to measure the precipitation. This small Version consisting of upper and lower housing part, measuring cylinder; Housing made of stainless steel, orifice rim made of brass. Type 7019.0000 can be supplied with a receiving area of 100 cm2. (This type is not conforming to meteorological standards). • Receiving area : 100 cm². • Rain measure (graduated glass) : 250 cm³. • Measuring range : 0 t0 25 mm precipitation (relative to a receiving area of 100 cm²). • Graduation : 1/1 mm precipitation. • Dimensions : dia 115 mm; height 300 mm. • Weight : approx. 0.8 kg.
Cross Staff
Description
The Cross-Staff was used at sea from the beginning of the 16th century until the first half of the 18th century. It was used to measure the sun's altitude, especially at the meridian passage. With the knowledge of the sun's declination, the mariner could then obtain his latitude. The staff is original, with the inscription. The cross pieces are replicas. Different cross pieces were used depending on the altitude. A different scale is on each side of the staff.
