XTEMOS ELEMENT
AJAX PRODUCTS TABS
Model of Terrestrial Telescope
Binocular Microscope
The future of class room microscopy with crisp sharp image, very much convenient in working, easy to move, light weight, durability, ergonomic design and affordable prices.
It became an ideal instrument for school labs, medical institutes, colleges and universities.
Specifications
| Viewing head | : | Inclined sliding type Binocular Head | |
| Eyepiece | : | Paired Wide Field Eyepiece WF 10x/18 | |
| : | Paired Eye-piece 5x Huygenian | ||
| Objectives | : | Semi-Plan 4x,10x,40x(SL) & | |
| : | 100 x (SL) Oil Immersion. | ||
| Nose-piece | : | Quadruple Nosepiece | |
| Mechanical Stage | : | Double plate stage size 140mm x 140mm, X/Y travel range 90mmx65mm.Low drive right side movement controls. Ceramic surface for scratch resistance. Double specimen holder clip | |
| Condenser | : | Abbe N.A 1.25 with Iris Diaphragm | |
| Filter | : | Frosted White Filter | |
| Illumination | : | LED Illumination, Brightness Adjustable | |
| Light Source | : | Plano-concave Mirror | |
| Carrying Case | : | Styrofoam Packing with standard accessories. |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
CONDENSER CLAMP
PRODUCT DESCRIPTION
- Three finger condenser extension clamp with Bose head.
- Aluminum stem the overall length of the clamp is 10.0.
- The extension rod contributing 6 the rubber coated jaws will open to 3.5 and will provide a six point contact for a firm
- The boss head right angle clamp will accept rods up to.63 /16 mm.
- 3 Finger Aluminium Condenser Clamp (Rubber Lined)
- 4 Finger Aluminium Condenser Clamp (Cork Lined)
- 3 Finger Brass C.P. Condenser Clamp (Cork Lined)
- 4 Finger Brass C.P. Condenser Clamp (Cork Lined)
Digital Stroboscope
Description :-
Stroboscopic flashes are triggered by either the internal oscillator or by external pulses which may be connected to the two 4mm sockets mounted on the rear panel of the instrument. Example of the many applications of this unit are to be found in motion analysis multi exposures photography, examination of moving parts and measurement of rotational speed.
Specifications:-
Input Volts : 220V AC, 50 Hz
Flash Rate: 0- 9999 Flashes per minute.
Resolution : 1
Display: 7 Segment LED (4 nos.)
Rocks And Minerals Collection
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Combined Object and Receiving Screen
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
Heart With Artery Blockage Models
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Two Stroke Petrol Engine Model
Linen Tester
Description
These are collapsible pocket magnifiers. The optical system is a single element, glass Double Convex Lens. The housing is made of machined, black high grade plastic for a high finish look. These magnifiers fold flat to fit in your pocket. Scales are etched on the inner faces of the viewers base.
Cylinderical Lenses
Description
Cylindrical lenses made of highly polished glass, magnifies in only one dimension. These lenses are used in transforming a point image to a line or changing the height of an image without changing its width.
| Size | Focal length | Add To Enquiry |
|---|---|---|
| Double-Convex | 50 x 50 mm | 75 mm |
| Double-Convex | 50 x 50 mm | 150 mm |
| Double-Convex | 50 x 50 mm | 200 mm |
| Double-Convex | 50 x 45 mm | 75 mm |
| Double-Convex | 50 x 45 mm | 150 mm |
| Double-Convex | 50 x 45 mm | 200 mm |
| Double-Concave | 50 x 50 mm | 75 mm |
| Double-Concave | 50 x 50 mm | 150 mm |
| Double-Concave | 50 x 50 mm | 200 mm |
| Double-Concave | 50 x 45 mm | 75 mm |
| Double-Concave | 50 x 45 mm | 150 mm |
| Double-Concave | 50 x 45 mm | 200 mm |
| Plano-Convex | 50 x 50 mm | 60 mm |
| Plano-Convex | 50 x 50 mm | 75 mm |
| Plano-Convex | 50 x 50 mm | 100 mm |
| Plano-Convex | 50 x 50 mm | 150 mm |
| Plano-Convex | 50 x 45 mm | 60 mm |
| Plano-Convex | 50 x 45 mm | 75 mm |
| Plano-Convex | 50 x 45 mm | 100 mm |
| Plano-Convex | 50 x 45 mm | 150 mm |
| Plano-Concave | 50 x 50 mm | 60 mm |
| Plano-Concave | 50 x 50 mm | 50 mm |
| Plano-Concave | 50 x 50 mm | 300 mm |
| Plano-Concave | 50 x 45 mm | 60 mm |
| Plano-Concave | 50 x 45 mm | 50 mm |
| Plano-Concave | 50 x 45 mm | 300 mm |
Underground Mine Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Staining Box
Aquatic Net
Ballistic Galvano Meters
Description
Used for measurement of small quantities of electrical charge. Levelling Screws for balancing the coil. Coil with mirror suspended between long suspension at the upper end and a spring at lower end. Clamping arrangement for transportation. Consistent sensitivity over a large period. Strip provided for making it a periodic. Res. in Ohm Crit. Damp. Res. in Ohms Sensitivity mm per m Coul. Sensitivity mm per m Amp. Time period in Seconds.| 100 | 300 | 1000 | 12 | 2000 |
| 500 | 600 | 1400 | 12 | 3500 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
LCR Resonance Apparatus
Objective : To plot Frequency Vs. Current Characteristics of LCR circuit when connected in series or in parallel.
Features : Instrument comprises of 3 Resistances, 3 Capacitors and 1 Inductance connected inside and connections brought out at Sockets. 2 AC moving coil meters to measure voltage and current.
Optional Acc. : Audio Frequency Function Generator
Funnel Stand Polished Wood
Description
Single:
Wooden, polished, with clamping screws. Rods are approx. 460 x 16 mm. Single base size 200 x 110 mm approx. Includes : (1) Funnel standSpecifications :
Length : (in) 19.0 Width : (in) 5.0Double:
Wooden, polished, with clamping screws. Rods are approx. 460 x 16 mm. Double base size 290 x 110 mm approx. Includes : (1) Funnel standSpecifications :
Length : (in) 19.5 Width : (in) 5.0
Dissolution Rate Test Apparatus
Description
Dissolution rate test apparatus is designed to carry out simultaneously SIX TESTS of dissolution rate of tablets & capsules as per USP standards. Dissolution Rate Test Apparatus consists of water bath made of transparent acrylic fitted with an inbuilt water circulation system. Machine has a DUAL TEMP. SENSOR system which controls both water bath temperature within +/- 0.1º C & senses the temperature of jars. The motor is digitally controlled to give speed between 20 to 160 RPM precisely within +/- 1 RPM. The micro-processor also have digital timer to control test timings from 00:01 to 99:59 (HH:MM). The machine is fitted with a LCD Display which keeps the user updated about the RPM, TIME & TEMPERATURE all the time. The unbreakable jars prevent accidents related to breakage & spilling of media in the lab. The jars have acrylic lids which allow passing of stirring shaft. The shafts are suspended from the top & are operated by the motor. Stirrer Assembly can be lifted with auto lifting mechanism for easy operations.Specifications
| Speed: | Variable from 20 to 160 with accuracy of +/- 1 RPM. | |
| Temperature | 30º C to 80º C (+/- 0.5º C) | |
| Timer | 00:01 to 99:59 Hrs. with alarm. | |
| Display | 20 x 4 LCD Display | |
| Bath | Made up of 8 mm thick clear acrylic (10mm Optional) | |
| Heater | 1000 Watts Stainless Steel | |
| Sensor | Dual Sensor System (PT-100) | |
| Auto Lifting Assembly | Available | |
| Jars | Unbreakable Ploycarbonate clear jars (6 Nos.) | |
| Power | 220 / 230V AC, 50 Hz |
IoT Development System
The industrial networks are primarly concerned with Programmable Logic Controllers(PLC),Distributed Control Systems(DCS), Supervisory Control and Data Acquistion Systems(SCADA) any many other hetrogenous devices in the form of differnt applications. More over these devices are based on either wired or wireless communication protocols like Profinet, Profibus, MODbus, WiFi, Zigbee and Etc.
