XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Constant Volume Air Thermometer

Description

A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod. An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions. With U-shaped base. Complete with 1 meter rubber tubing to connect reservoir to the bulb. Supplied without mercury.

Tangent Galvanometer

Description

Plastic bobbin with 2, 50 and 500 turns of insulated copper wire and rotatable on vertical axis is mounted on a moulded plastic base, with leveling screws and four terminals, with magnetometer mounted at the center of the bobbin.

REAGENT BOTTLE Narrow mouth

PRODUCT DESCRIPTION: Reagent Bottle, Clear, Narrow Mouth, Glass Stopper, Soda-lime Glass FEATURE:
  • A traditional type of bottles are placed on sheilves of laboratories as it is clear and transparent.
  • It does not get heated easily when exposed to heat
    Size: 30ml 60ml 125ml 250ml 500ml 1000ml
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Comparative Terrain Model

Description

Set of 2 landform models, each includes an overlay representing ancient mountain forms that can be removed and compared with the base model to show changes millions of years later. Cross section shows basic mountain types, volcanic fault block, glaciated domes and folded mountains with lesson plan, size 45 x 60 cm.

Histology (Shark)

Dogfish Skin VS Shark Embryo TS through Tail Region Shark Embryo TS through Snout Region Shark Embryo TS through Eye Region Shark Embryo TS through gill Region Shark Embryo TS through Trunk Region

Dicot Root T.S.

Description

Showing complete internal anatomy of the young dicotyledonous root, mounted on board with key card.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Typical Plant Cell

Description

A highly enlarged model, as seen under electron microscope, a portion of wall is removed to show ectoplast, endoplast, tonoplast, vacuoles, nuclear structure, plastids, mitochondria etc. mounted on base with key card.

Composite Walls Apparatus

Composite Walls Apparatus: The apparatus consists of a pair of M.S. plates, Bakelite, brass/aluminum. These plates in series on either side of the heater form a composite wall. The whole unit is clamped in a frame, which can be viewed through the Perspex sheet. The thermocouple tapings enables us to find out the conductivity and resistance of the composite walls.

SPECIFICATIONS:

1.Heater- Mica healer of dia. 250 mm. 2.Plates- a) M.S. plates of thickness 25mm & dia. 250mm.-2 nos. b) Bakelite plates of thickness 10mm & dia. 250mm.-2 nos. c)Brass/Aluminum plates of thickness 15mm & dia. 250mm.-2nos 3.Dimmerstat – 2 A capacity. 4.Measurements — a) voltmeter and an Ammeter to measure input power. b) Multichannel digital temperature indicator to measure temperatures at- various points. A technical manual accompanies the unit.

SERVICES REQUIRED:

230 V, A.C. stabilized supply along with earthing connection. Bench area Im x lm x 0.5m height

Voltmeter Dual

Description

Dual Scale, Moving coil D.C. only. Any rnage 1/5, 3/15, 5/15 volts.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Advanced Surgical Suture Arm

Description

Interchangeable arterial and venous inserts within the fore arm allow creation of arteriovenous (AV) fistulas and placement of AV grafts, while a simulated healed fistula insert provides a platform on which hemodialysis exercises can be performed. An additional multi-layer insert in the bicep area can be used for incision and suture training exercises.

Advanced Arterial Patient Training Arm Features:

Subcutaneous injection sites on the volar forearm and lateral upper arm Intra Muscular injection site on the upper arm Arterial system including the radial and brachial arteries Suture and incision sites on both the upper arm and forearm Hem dialysis site on the forearm Arterial and Venous insert for IV and blood draw exercises, AV anastomosis, and placement of AV grafts. This multi-layer surgical insert includes the skin, subcutaneous tissue, muscle, radial artery, and radial vein AV fistula insert that simulates a healed fistula for hem dialysis exercises. Multi-layer bicep insert that includes the skin, subcutaneous tissue, and muscle and allows incision and suturing exercises Durable skin that can be pierced in excess of 200 times with a 20 or 22 gauge needle Realistic tactile feedback for both surgical and arterial & venous stick exercises Adjustable heart rate and pulse strength simulating a heart rate from 10 BPM to 150BPM Cephalic (antecubital), Basilic, Radial, and Ulnar veins as well as the radial and brachial arteries for infusion and blood draw. Rotating arm allowing dorsal and volar access along the length of the arm. Varying vessel palpability to simulate collapsed or bulging vessels and ease of assembly. Latex-Free New proprietary materials replicate of skin, subcutaneous, and muscle layers at all surgical sites. Upgraded inserts, skins, and vessels for improved tactile feedback Micro pump embedded within the shoulder generates variable heart rates and pulse strength. Easy to replace plug-and-play inserts to allow quick change-out between procedures. Latex-free vessels with improved access for hassle-free replacement.

Bacteriological Incubator

Specification

Standard Double Wall Fabrication, inner & outer chamber made of thick mild steel sheet. Painted with hammer tone paint finish. The gap between the walls is fitted with special grade glass wool. Provided with two or three removable shelves. Heating elements provided on three sides to attain quick and uniform heating in range of 30°C to 110°C + 1°C controlled by hydraulic type capillary thermostat. An L- Shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.

Optional

Air circulating fan. Timer 0-24 hours.
Chamber Size In mmsChamber SizeCap. (App.)
300x300x300(12"x12"x12")28L
350x350x350(14"x14"x14")45L
400x400x400(16"x16"x16")65L
450x450x450(18"x18"x18")95L
600x450x450(24"x18"x18")125L
600x600x600(24"x24"x24")224L

Scalpels Handles

High quality steel handles, slotted to accept blades

Spherometer Laboratory

Spherometer Laboratory • Brass dial head 40 mm diameter, mounted on stainless steel screw. • Head divided into 100 divisions, reading to 0.01 mm and registering on vertical scale 10-0-10. • Frame with three legs of stainless steel. • Distance between two legs is 40 mm approximately. • Pitch 1mm.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Demonstration Meter

Description

In a rectangular transparent plastic case, provides clear view into the working of meter. Moving coil type, can be supplied as ammeter, voltmeter or galvanometer 4 mm terminals.
GalvanometerVoltmeterAmmeter
30-0-300 to 5, 10, 50, 250V0 to 1, 1.5, 3, 5A

Slide Mailer

We present to our esteemed clients, Slide Mailer. The Slide Mailer is the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in three sizes i.e.1, 2 & 5 slides. Material : Polypropylene
ParticularsPack (Pcs) 
Slide Mailer - 1 Slide25 
Slide Mailer - 2 Slides25 
Slide Mailer - 5 Slides25 
Slide Mailer - 10 Slides25 

Siemens IoT 2020 Gateway

Specification:

• SimaticIoT 2020 Educational Intelligent gateway • Intel Quack Soc x 1000 • 400MHz operating frequency • Micro SD card slot, upto 32GB • 512MB RAM, 8MB Flash, 256KB SRAM • One USB controller and one USB device • FTDI USB to serial Interface • One no of 10/100Mbps Ethernet • Arduino Uno R3 compatible expansion slot • One mini PCIe expansion slot for WLAN/additional Ethernet port • Yocto V2.1 based Linux operating system • Input supply 24V DC • Programming in high level language • Support for various protocols like Modbus RTU, POC UA and cloud protocols like MQTT/AMQP

Draining Rack

Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate of this Draining Rack has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack not rot, stain or rust. Material : Acrylopitrile Butadiene Styrene / Polycarbonate
ParticularsPack (Pcs) 
Draining Rack1 
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture