XTEMOS ELEMENT
AJAX PRODUCTS TABS
Sine / Square Oscillator 1 Hz – 1MHz
Wave Shapes : Sine and Square waves output 4 mm sockets.
Frequency Range : 1 Hz to 1 MHz using fine and coarse controls.
Accuracy : ± 5% on all ranges.
Amplitude for sine wave output : 30 Vpp.
Amplitude for Square wave output : 15 Vpp
Output Impedance for sine wave : Approx. 600 Ohms.
Output Impedance for square wave : Approx. 400 Ohms
Mock Layout Of Car Wiring Conventional Type
It is an open type instructional apparatus. This unit is capable of operation when a standard battery is connected to the given terminals, Consisting of all essential parts as self starter, alternator, ampere-meter, ignition coil, distributor, 4 spark plugs, horn, long lights with dipper light, park-lights, dipper, back stop light and switches. The whole system is beautifully fitted on 100 x 80 cm base with electric motor working on 220 volts A.C and capable to drive the alternator. Without battery.
Critical Heat Flux Apparatus
The apparatus demonstrates the regimes of pool boiling. The test section consists of a test wire surrounded by water of constant temperature. The surface temperature of the test wire is heated by passing current through it. Due to the temperature difference between the wire surface and surroundings, the difference regimes are observed till the burnout point.
Specifications:
1.Test wire -35 gauge or 40 gauges. Length = 10cm. 2.Nichrome heater- 1 kw capacity – 1 nos. 3.Glass trough of sufficient capacity. 4.Table light to observe the test wire. 5.Voltmeter and ammeter to measure the input to the test wire. 6.Dimmerstat to adjust the voltage. A technical manual accompanies the unit.SERVICES REQUIRED:
1.220v, ISA, stabilized single-phase supply. 2.Floor surface- 1m x 1m at working height.
Collapsible Tube Filling Machine (Hand Operated)
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Metal Rivets, Brass
Description
Supplied as rivets. Pk of 500gms. Brass,lead,aluminium,iron, For specific heat capacity experiments. Supplied as rivets. Packets of 500 grams.300 mm long x 3 mm dia. Supplied in packets of ten rods. Copper,iron,lead,aluminium,brass 300 mm long x 3 mm dia. Supplied in packets of ten rods.
Urine Container
We offer best quality Urine Container s which can be used for collecting a wide range of samples of sputum, urine etc.
Moulded in polypropylene these containers are excellently leak proof.
These Urine Containers are manufactured from best quality raw material and are durable in nature.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Urine Container 30 ml | 100 | |
| Urine Container 60 ml | 100 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Test Tube Stand of 6 Holes, Wooden
Description
With vertical pins:
Wooden, polished stand with drilled holes, 2 of 25 mm dia. and 4 of 20 mm to accommodate 6 tubes with overall height of 9 cm and length of 20 cm. Vertical pins are provided for quick drying of the test tubes. Also available for 12 tubes, with 2 holes of 25 mm dia and 10 holes of 20 mm dia.Specifications :
Length : (in) 9.4 Width : (in) 3.5Without vertical pins and moulded supports:
Wooden with base and top with single row of 6 holes, clips together quickly and easily with two moulded supports. Height 11cm can accept two tubes of 30 mm and four tubes of 20mm diaSpecifications:
Length: (in)11.8 Width: (in)10.2Without vertical pins:
Wooden test tube stand - 6 holes of 22 mm dia. Test stand measures 9.5" long 2.5" wide base and 4.5" tall (Test tubes not included - shown for demostration )Specifications :
Weight: (lb)0.9 Length: (in)10.0
Root Anatomy
Composite Walls Apparatus
Composite Walls Apparatus:
The apparatus consists of a pair of M.S. plates, Bakelite, brass/aluminum. These plates in series on either side of the heater form a composite wall. The whole unit is clamped in a frame, which can be viewed through the Perspex sheet. The thermocouple tapings enables us to find out the conductivity and resistance of the composite walls.
SPECIFICATIONS:
1.Heater- Mica healer of dia. 250 mm. 2.Plates- a) M.S. plates of thickness 25mm & dia. 250mm.-2 nos. b) Bakelite plates of thickness 10mm & dia. 250mm.-2 nos. c)Brass/Aluminum plates of thickness 15mm & dia. 250mm.-2nos 3.Dimmerstat – 2 A capacity. 4.Measurements — a) voltmeter and an Ammeter to measure input power. b) Multichannel digital temperature indicator to measure temperatures at- various points. A technical manual accompanies the unit.SERVICES REQUIRED:
230 V, A.C. stabilized supply along with earthing connection. Bench area Im x lm x 0.5m height
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Resistance Substitution Box
Description
Resistance Substitution Box is a convenient instrument for determining the desired resistance values in circuits under design or test. This resistance substitution box has 12 different values 100Ω , 220 Ω , 470 Ω , 1 kΩ , 2 kΩ, 4 kΩ , 10 kΩ , 22 kΩ , 47 kΩ, 100 kΩ , 220 kΩ and 470 kΩ . All resistors are precision 1% resistors and are of 1 watt rating Selected resistor can be attached in any circuit with 4 mm two red safety sockets.
Sonometer, Two Wire
Bone Cutters
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
PATHOLOGY INCLINED MONOCULAR MICROSCOPE
PRODUCT DESCRIPTION:
OBSERVATION HEAD: MONOCULAR Inclined at 45° and Rota table 360º with perfectly centered Quadruple BAL Bearing revolving nose piece. OBJECTIVE- 4/5x, 10x, 40/ 45x, 100x (oil). EYE PIECES- 10x WF (one), Huygenian 5x or 15x (Any one)MECHANICAL STAGE: Double plate 130x140 mm Low drive mechanical stage for X & Y movement with Sub stage bright field condenser N.A. 1.25 & iris diaphragm with built in swing out filter holder and up-down movement through rack & pinion. FOCUSING SYSTEM: Separate Coarse & highly sensitive fine movement mechanical graduated to 0.02mm. With locking device. EXTRA LARGE BASE: To support the robust arm, has built in with LED cooled bright Illumination or 6V 20 W HALOGEN LAMP with soft start continuously variable intensity controlled regulator & quick change bulb provision. PACKING: Microscope supplied one Plano concave mirror for use in day light, duster, cover & instruction manual.
Ray Optics Kit
Description
Consists of 2 lamps and two stands, 1 pair housing shields, 2 combined single and triple slit plates, 2 multiple slit combs, 2 holders for combs and slit plates, 4 wooden light barriers, and following cylindrical lenses, of size 50 x 50 mm. 4 No Lenses of +7D, 2 of +10D, 2 of +17D and 2 of -17D.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Insect Collecting Net
Description
Ring made of iron wire supported on handle with fine rubber grip at end. length of handle 75cm. 75cm long net bag fitted in ring through 5cm wide cloth rim, Dia of bag at free end 25cm, Ring dia 30cm. Insect Collecting Net With Aluminium Pipe Handle in powder coated paint Insect Collecting Net With Iron Pipe Handle in powder coated paint Insect Collecting Net With Wooden spirit polished Handle. Spare net bags for insect collecting nets / muslin / nylon / synch.
Plant Structure II – Gymnosperms, Ferns, Mosses & Liverworts
Set of 17 Slides, comprising
Dryopteris, TS pinnule with sori
Dryopteris, TS Rachis
Dryopteris, TS rhizome
Funaria, LS of capsule
Lycopodium, TS Stem
Marchantia, VS thallus
Moss, LS antheridial Head
Moss, Leaf WM Pinus, TS young root
Pinus, LS male cone with microscopers
Pinus, LS whole female cone
Pinus, Pollen
Pinus, stem macerated
Pinus, TS leaf
Pinus, TS old stem
Polytrichum, TS stem
89C51 Development Board
Specification:
• High Performance MCU:P89V51RD2 8 bit with 64K program flash, 1xUART, 4x 8bit I/O, 4level priority,7 interrupt sources, upto 40 MHz operation • All the IO lines are terminated through 4nos Pin FRC Connectors • One SPDT Switch provided for PROG/EXEC mode selection and one SPDT switch for Power ON/OFF Control. • RS232 interface with two status LEDs for Programming and UART interface • One 8 – way DIP switch for Digital Logical Input • On board 8 Leds for Digital Logial Output • 4x4 Matrix Keypad, On board 16x2 LCD • On board RTC interface with four function keys • Two 12V relay with driver Circuit for DC Motor 0.5 Kg Stepper Motor with relevant driver circuit • On board DAC terminated via 2-pin Phoenix Connector • On board 8 channel ADC with Temperature sensor
Measuring Jugs
The Measuring Jugs, moulded in Polypropylene are clear, autoclavable and have good chemical resistance.
The Measuring Jugs are provided with a handle for easy & convenient lifting and have raise graduations for easy reading.
Adding to the existing range of Jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non-drip spout.
These jugs have raised graduations, provide excellent contact clarity, & are provided with excellent thumb grip on handle.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Jug 250 ml | 12 | |
| Measuring Jug 500 ml | 12 | |
| Measuring Jug 1000 ml | 6 | |
| Measuring Jug 2000 ml | 6 | |
| Measuring Jug (Euro Design) - 500 ml | 12 | |
| Measuring Jug (Euro Design) -1000 ml | 6 | |
| Measuring Jug (Euro Design) - 2000 ml | 6 | |
| Measuring Jug (Euro Design) - 3000 ml | 6 | |
| Measuring Jug (Euro Design) - 5000 ml | 4 | |
| Measuring Jug (Printed Graduation) - 100 ml | 12 | |
| Measuring Jug (Printed Graduation) - 250 ml | 12 | |
| Measuring Jug (Printed Graduation) - 500 ml | 12 | |
| Measuring Jug (Printed Graduation) - 1000 ml | 6 | |
| Measuring Jug (Printed Graduation) - 2000 ml | 6 | |
| Measuring Jug (Printed Graduation) - 5000 ml | 4 |
