XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Refrigerant Charging Unit

This charging unit is fitted with motorised vacuum pump and other safety devices like pressure gauge. With the help of this charging unit students can charge the refrigerant gases into compressor or store the gas of a refrigerator or air conditioner inside the cylinder fitted inside the charging unit that can be used later.

DDS RF Source and Network Analyzer

This unique instrument is RF source upto 1.7GHz with 10 to 400MHz in DDS mode of operation and few Network Analyzer capabilities.

Specification

• It works in two mode of operation. - 10 to 400MHz - DDS operation. - 400 to 1700MHz - PLL operation. • 10 to 1700MHz, RF signal generator. • RF Output Power: 10 to 400MHz, -2dBm, +/-3dB 400 to 1700MHz, -5dBm, +/-3dB. • Harmonics: 10 to 600MHz better than -15dBc 600 to 1700MHz better than -30dBc. • Attenuation: 5dBm, 10dBm, 20dBm, 30dBm. • Fixed and sweep RF signal source. • Direct digital synthesis (DDS) method based. • 100 KHz Channel step size. • AM/FM Modulation. • Automatic Level Control (ALC) incorporated so that, RF level output will be constant. • Graphics LCD display to plot Filter, Amplifier etc., characteristics.

Flexible AC Transmission Systems

Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.

It consists of

• Generator Set-up (3Φ AC Source) • Simulated Transmission line • IGBT Based VSI Power Module • Series & Shunt Transformers with LC filter • RLC - Load setup • TMS320F2812 DSP Controller • Upgrade possible

Generator Set-up (3Φ AC Source)

• 3 phase Alternator DC Motor Drive setup 3Φ / 1KVA / 1500 RPM / Salient Pole type coupled with 2HP/220V DC shunt motor and with suitable drive from 1Φ AC input supply with • suitable speed control, sensor and digital speed indicator. • Digital controller with IGBT based DC voltage controller for DC motor Armature Voltage variation 0-200V DC/10A & Alternator field voltage variation with necessary instruments • /meters/indicators.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Four Stroke Petrol Engine Model

Description

Represents internal structure and operating principles of an air cooled two-stroke engine. All parts in aluminium alloy. Ignition is shown by means of a miniature bulb. Carburetter and fuel supply also sectioned. Mounted on base with printed diagram showing working. Two-Stroke Petrol Engine Four-Stroke Petrol Engine are also available.

CNC Mill Trainer

CONTROLLER:

SIEMENS 802D Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety, 1.5 HP X, Y and Z Drives : SIEMENS Servo Motors and Drives Input to Stepper : Optically lsolated Motor Drive TTL compatible Interpolation : Linear, Circular parabolic Interpolation, Slot / Pocket Milling Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std Codes

TABLE:

Length x Width : 450 x 175 (approx.) Clamping Area : 350 x 175 (approx.) T Slots : 10mm slot width

MACHINE DETAILS:

Resolution : 5 micron Tool Change : Automatic, 8 station Rapid Travel : 5000mm/min Weight in kg : 750kg Dimension in mm : 850 x 850 x 1550 mm Automatic Lubrication : Provided Repeatability : 10 micron

SPINDLE:

Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 100 to 4000 RPM

AXIS TRAVEL

Longitudinal Traverse : 250mm Cross Traverse : 175mm Vertical Traverse : 250mm

Photon Energy Array

This unit is designed for the Advanced Physics Course and provides everything necessary for studying the characteristics of modern LEDs. Measurements taken with the unit enable an approximate value of Planck’s constant to be determined.

Electronic Ignition System Of An Automobile

Electronic Ignition System Of An Automobile The open demonstration unit is complete on board with original parts, ignition switch, ignition coil, electronic distributor (motor driven), four plugs necessary connections and power supply.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Spectrometer Prism

Description

Dense flint glass, refractive index 1.620 to 1.623 25 x 25 mm
32 x 32 mm
38 x 38 mm

Level Process Controller

Features

• It is a miniature version and occupies less space. • A RF capacitance Level Transmitter is used to sense the tank level. • An Industrial standard electro pneumatic converter is used to control the control valve. • A Pneumatic control valve is used to control the Level of the tank. • A Process tank of 3 liter capacity with graduated level scale. • A Rust proof reservoir tank (SS) capacity of 8 liters. • A centrifugal pump is provided for water circulation. • An air Regulator cum filter of capacity (0-2.1) Bar is provided to regulate the Air pressure. • Bypass line provision is provided to avoid pump over loading. • Hand valve provision is provided to make the disturbance study. • All the water flow lines are fitted by SS pipes. • USB/Serial port data acquisition is provided.

Claw Clutch Working Model

Claw Clutch – Working Model Properly constructed model. Complete on base with operating lever.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Plain Laboratory Desiccator

We offer premium range of Plain Laboratory Desiccator which can be availed at market leading price range. Plain Desiccator have excellent quality and durability. Grease should be applied on the flanges to make it air tight. Material : Polypropylene/ Polycarbonate
ParticularsPack (Pcs) 
Desiccator (Plain) PP/PC 150 mm1 
Desiccator (Plain) PP/PC 200 mm1 
Desiccator (Plain) PP/PC 250 mm1 
Desiccator (Plain) PP/PC 300 mm1 

Automatic Knife Sharpener

Description

Portable, precision automatic knife sharpener with timer 0-60 minutes to adjust sharpening time. This equipment can sharpen all microtome knives up to 140 mm in length. Complete with one universal holder, two honing plates, one bottle honing glass compound, one knife inspection block and one re-dressing pad but without micro abrasives.

Polishing Pan

Features

Inner Dia 12 x8" high with opening of 7" Dia neck. Detachable polishing pan for use with Tablet Coating Pan. Made Of M.s. Provided With Inner Lining Of Superior Canvas Cloth.

Isobilateral Leaf

Description

Showing the details of transverse section of leaf, mounted on board, with key card.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Digital Coductivity Meter

UsageIndustrial, Laboratory 
MaterialMS 
ColorWhite 

Features

Highly Stable and Accurate Cell Constant Adjustment Facility Available in Lab & Field models Temperature Coefficient Correction facility
Display3 1/2 Digit LED3 1/2 Digit LCD
Range5 Ranges 0 - 1000 Mohs/cm2 Ranges 2 & Mohs/cm
Temperature CompensationManual 0-50oC-
Cell Constrant AdjustmentAdjustablePre Adjustable
Conductivity CellPlatinum DIPPlatinum DIP
Measuring Frequency1000 Hz1000 Hz
Accuracy1% FSI1% FSI
Power230v 10%1 x 9V Battery
Dimensions76 x 275 x 175 mm85 x 28 x 165 mm
Weight2 kg. (Approx.)0.8 kg. (Approx.)
AccessoriesConductivity Cell, Operation Manual, Dust Cover.

Karl Fisher Titrimeter

Description

Auto Karl Fischer Titrimeter – 761 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples. The instrument comprises of two units i.e CONTOL UNIT & TITRATION UNIT. The CONTROL UNIT controls the complete automatic titration. On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology. Titration unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet is designed to serve as a titration stand. Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper and textile industries, petroleum refineries, chemical and fertilizer units etc.

Pendulum Bobs dia 25mm- Set of 3 (Brass, Copper & Iron)

Set of 3 metal spheres of 25mm dia with a small ring Comprising a solid sphere of one each brass, copper & iron having diameter of 25 mm with a small ring for suspension.

Human Ear, 6 Parts

Description

Four times enlarged, dissectible into 6 parts. Shows outer, middle and inner ear. Removable tymponic membrane with malleus and incus as well as labyrinth with stapes, cochlea and vestibulocochlear nerve (2 part) with two removable bone sections to close the middle and inner ear. On board with key card.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture