XTEMOS ELEMENT
AJAX PRODUCTS TABS
CNC Lathe Trainer With Servo Drives
CONTROLLER:
(1) Type of control system: PLC based system (2) Main Spindle Drive : AC Motor with VFD (3) Z and X Drives : Stepper drive with RAMP function (4) Input to Stepper Motor : Optically Isolated (5) Motor Drive :TTL Compatible (6) Run Speed Control : Computer controlled through software (7) Interpolation : Liner / Circular / Parabolic (8) Cycles Used :G,M,S,T,F,I,K,M,F (9) Cycles : Circular Interpolation / Canned (10) Threading : Straight / Taper (11) Power Devices : Short Circuits and over Temperature Protected (12) Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
(1) Center height : 100mm (2) Swing over Carriage : 80mm (3) Distance between Centre : 250mm (4) Longitudinal Travel : 250mm (5) Weight : 350 kg (6) Dimension in mm : 1100 x 750 x 1700 (7) Rapid Travel : 500mm/min (8) Resolution X & Z Axis : 10micron (9) Dt. Motor Power : 40V – 4A (10) Lubrication : ManualSPINDLE:
(1) Spindle Speed : Continuous Variable (2) Spindle Power : 2 HP (3) Inside Taper : MT3 (4) Speed Range : 50 to 3000RPM
PCR Tube Rack
We are one of the prime Exporters and Traders of PCR Tube Rack .
Used for keeping PCR Tubes, Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene.
PCR Tube Rack facilitates the use of multipipetters.
A number of racks can be stacked together to save shelf space.
Material : Polycarbonate / Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| PCR Tube Rack (Rack for 96 PCR Tubes of 0.2 ml | 4 |
Tuning Forks Set, Even Frequency
Ring Magnet, Ceramic
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Simple Circuits Kit
Description
To explain working of electricity by simple circuits. Students can create simple circuits and learn about electricity, currents, voltages, series circuits and much more. Kit includes: D cell battery holder, knife switch, 2 light bulb holders, 2 light bulbs, 5 alligator connector cords and instructional manual.
Coil Ignition System Of An Automobile
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Screw Gauge Micrometers
Slide Storage Rack
We are engaged in providing Slide Storage Rack can hold 100 slides which are recognizable through the numeric indexing.
Spacing between the slots provides adequate backward & forward movement of slides for convenient recognition.
Made of ABS, the transparent cover provides excellent view of the slides stored inside.
Material : Acrylonitrile Butadiene Styrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Slide Storage Rack - 100 Slides | 6 | |
| Float Rack | 12 |
Geographical Terms
Dental Care Model(With Cheek), PVC
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Thermal Conductivity Of Liquid
Thermal conductivity of is an important engineering property. The apparatus uses guarded hot plate method for determining thermal conductivity. It consists of hot plate i.e. an electrical heater sandwiched between two plates. The heat loss from hot plate is prevented by using two guard heaters and heat of removes heat from liquid by circulation of water. Input to heaters the temperatures.
SPECIFICATIONS:
1.Guarded hot plate assembly comprising of main heater, ring guard heater and top guard heater, mounted over the liquid test cavity. 2.Cold plate assembly provided with water connections. 3.The assembly is housed in an enclosure box with glass wool insulation. 4.Instruments panel consisting of : a).Digital voltmeter and ammeter of suitable range. b).Dimmerstat for controlling input to the heaters (2 amp. 3 Nos.) c).Multichannel digital temperature indicator.SERVICES REQUIRED:
1.Floor space of about 0.75m. x 1.5m. at working height. 2.230v. AC electrical supply with earthling connection. 3.Water flow rate of about 10- 15 lit/min. at constant head.
Domestic Refrigerator Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Autoclave, Triple Wall, Vertical, High Pressure, Nut Locking
Specification
Triple Wall, double chamber Autoclave. The lid, ring, inner chamber, middle chamber and outer wall are made of stainless steel. The instrument is absolutely leak proof. Equipped with pressure gauze, safety valve, double safety valve, steam release valve, rubber gasket, mild steel legs for Autoclave. The autoclave can hold the in between 5psi to 20 psi. Autoclave, Triple Wall, Vertical, High Pressure, Nut Locking.| Capacity (Lt.) | Size | |
|---|---|---|
| 40 litres | (12” x 22”) | |
| 60 litres | (14” x 25”) | |
| 75 litres | (16” x 24”) | |
| 95 litres | (18” x 24”) | |
| 180 litres | (22” x 30”) |
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Polarimeter, Senior
Description
Designed to accept observation tube upto 220 mm length. Its improved rotating half shadow system at the front ensures perfect focus and clear definition. With angular glass scale 0-360º, divided into degrees and reading upto 0.05º with micrometer. A sugar scale from 30º to 120º read upto 0.1 sugar degree. Supplied complete with two polarimeter tubes, 100 mm and 200 mm with dust cover.
Mock Layout Of Car Wiring Conventional Type
It is an open type instructional apparatus. This unit is capable of operation when a standard battery is connected to the given terminals, Consisting of all essential parts as self starter, alternator, ampere-meter, ignition coil, distributor, 4 spark plugs, horn, long lights with dipper light, park-lights, dipper, back stop light and switches. The whole system is beautifully fitted on 100 x 80 cm base with electric motor working on 220 volts A.C and capable to drive the alternator. Without battery.
Metal Rivets, Brass
Description
Supplied as rivets. Pk of 500gms. Brass,lead,aluminium,iron, For specific heat capacity experiments. Supplied as rivets. Packets of 500 grams.300 mm long x 3 mm dia. Supplied in packets of ten rods. Copper,iron,lead,aluminium,brass 300 mm long x 3 mm dia. Supplied in packets of ten rods.
Brush, Bottle
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Embryonic Development (Period Of Gestation)
Description
A set of nine detailed models, mounted on stands, showing the following stages: An Embryo About 6 Days Old, Considerably Enlarged. Uterus With The Embryo In 1st Month Of Gestation. Uterus With The Embryo In 3rd Month Of Gestation. Uterus With Foetus In 4th Month. Uterus With Foetus, Placenta And Umbilicle Cord. Uterus With Foetus In 5th Month. Uterus With Foetus In 7th Month Of Pregnancy. Uterus With Foetus In 8th Month Of Pregnancy. Uterus With Foetus In 9th Month Of Pregnancy. Complete With Key Cards.
Porcelain Evaporating Basins (China Dish)
Description
We are a pioneering Exporter and Supplier of Porcelain Evaporating Basins. We manufacture Porcelain Evaporating Basins in different forms and shapes, thus these basins are suitable for diverse purposes. Due to their high quality and fine finish Porcelain Evaporating Basins are demanded all across the globe.Diameter Sizes
Dia 2" Dia 2.5" Dia 3" Dia 4" Dia 5" Dia 6"
Leaf Area Meter
Description
Leaf Area Meter We have been affianced in offering an exclusive collection of Leaf Area Meter which is used to obtain measurements of leaf area without detaching the leaf from the plant. The offered meter is manufactured with the use of high grade components and latest tools in order to meet the set industry standards. These are extensively used for conducting various tests and studies on the leaves of a tree.
MCT Box
MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable.
One size can hold 64 MCTs of 1.5 ml. & the other can hold 100 MXT's of 0.5 ml.
These MCT Boxes are designed to work at temperatures ranging from -190'C to + 121" C.
The transparent cover provides a good view of the contents inside & is numbered for better inventory control.
| Particulars | Pack (Pcs) | |
|---|---|---|
| MCT Box (Rack for 100 MCTs of 0.5 ml) | 4 | |
| MCT Box (Rack for 64 MCTs of 1.5 ml) | 4 |
Car Chassis Rear Wheel Drive Actual Cut Section Motorised
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
3Ø – 3Ø Matrix Converter
FEATURES:
• 9 No. Bi-directional Switch with IGBT and Fast Diode Bridge,Rating@1200V 50A Forms 3 Phase to 3 phase Matrix Converter Power Circuit • Output of Matrix Converter Terminated by Banana Connector in the Front Panel • 9 No. High Speed Opto- IC Provided for Gate PWM Isolation. • 9 No. Single Channel IGBT Driver IC with Current Limiting Facility Provided for IGBT Gate Driving. • 9 No. 15V DC Power Supply Provided Internally for Control Circuit. • 3 No. Inductor and AC Capacitor Provided for Three Phase Input Filter. • One No Three Phase Synchronizing Transformer (230/9V) Provided for three Phase Supply Synchronization • 6 nos Hall-effect Current Sensor with Signal Conditioning Circuit Provided for Output and Input Current Measurement and Protection. • AC voltmeter is provided for measure the input AC voltage. • +/- 15V DC Internally Provided for Sensor Signal Conditioner Circuits. • MCB Provided for Input power ON/OFF and OL Protection ON/OFF Switch. • Test points are provided on the front panel to measure the voltage, current and PWM signals • 34 pin FRC Connector Provided for IGBT Gate PWM Inputs. • Input : Three Phase 440V AC, 50 Hz. • Output : Three Phase Variable Voltage, variable frequency • Rating : Suitable for 1 HP 3Ø AC Induction Motor
