XTEMOS ELEMENT
AJAX PRODUCTS TABS
Resonance Apparatus, Simple Form
Outside Micrometers With Micron Reading
Description
Micrometer is used to measure short lengths accurately Technical Details : Least Count : 0.001mm Carbide Tipped Measuring Faces Blue Metallic Finish Frame With Locking Clamp and ratchet stop Etching Marking on the Vernier Scale ; Sizes Least Count in mm 0-25 0.001mm 25-50 0.001mm 50-75 0.001mm 75-100 0.001mm Guarantee 6 Months without abuse Packing Plastic Box Calibration In house.
Human Female Pelvis
Ticker Tape Timer
For the measurement of velocity and acceleration, using timing marks made on a moving paper tape by a vibrating striker.
Designed to operate on a 12V A.C. supply and uses the mains frequency as its timing standard.
The unit is housed in a moulded case including mounting flanges.
The top of the case caries a tape guide which incorporates a carbon paper disc support and an adjustable anvil for the striker point.
All moving parts are fully enclosed and a pair of 4mm sockets are provided on the side of the case for connection of the electrical supply.
Supplied with a roll of self marking paper tape.
Paper tape : 100m of paper tape, 9.5mm wide.
Carbon Paper Discs : 40mm diameter, with 3mm hole, cut from long life plastic film type carbon paper.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Discharge Over Notches Apparatus
DESCRIPTION:-
The Lab setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel .A hook gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three brass notches, i.e. rectangular notch. 60 V notch & 45 V notch provided along with the set up. Present set – up is self –contained water re- circulating unit .provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass value are fitted in water line to conduct the experiment on different flow rate .Flow rate of water is measured with the help of measuring tank and stopwatch.EXPERIMENTS:-
Ø To Determination Co-efficient of discharge (Cd) through Ø V notch (45 deg. and 60 deg.) Ø Rectangular Notch. Ø Trapezoidal NotchUTILITIES REQUIRED: –
Ø Water Supply & Drain Ø Electricity 0.5kw,220V AC, Single PhaseTECHNICAL SPECIFICATION: –
Ø Channel Test Section : Size 600x250x180 mm Ø Notches : Material Brass(3 Nos) 1. Rectangular Notch 2. 45 deg. V Notch 3. 60 deg. V Notch 4. Trapezoidal Notch Ø Hook / Pointer : With Vernier Scale Ø Water Circulation : FHP Pump, Crompton/Sharp make. Ø Flow Measurement : Using Measuring Tank with Piezometer, Cap.25 Ltrs. Ø Sump Tank : Capacity 70 Liters. Ø Stop Watch : Electronic Ø Control Panel : On/Off Switches, Main Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted Structure.
Hydraulic Bench Apparatus
OBJECTIVE:
To conduct the experiment of hydraulic bench, with separate experiential set ups i.e. Hydrostatic Pressure, Flow over Weirs, Bernoulli’s Theorem, Flow meter Demonstration, Impact of jet and Orifice Discharge etc. which are accessories of the Hydraulic Bench.DESCRIPTION OF APPARATUS:
The set up is a self-contained, water recirculation unit provided with a top tray, sump tank and a measuring tank. Drain valve and over-flow are provided on the sump tank. A centrifugal pump is fitted for water circulation. Flow control valve and bypass valve is fitted in water line to conduct the experiment at different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Measuring tank is provided to measure the discharge. Drain valve is provided in the measuring tank to empty water in sump tank after measuring discharge. Separate level indicator and scale is provided to read the level of water in the measuring tank.UTILITIES REQUIRED:
1.Water Supply (Fill approx 250 Ltrs Initially). 2.Drain Required. 3.220 V AC, 50 Hz, single phase electric supply source. 4.Floor area 1.75 m x 1.50 m.SPECFICATION:
1. Top Tray : 1060 mm x 650 mm. 2.Pump : 1 HP 3.Flow Measurement : Using measuring Tank (Material SS) 4.Tank : Capacity 40 Ltr. 5.Sump Tank : Capacity 120 Ltr. Material SS. The whole set-up is well designed and arranged in a good quality powder coating painted structure.
10KW IGBT Based Power Module
FEATURES:
• 1200V/ 75A, Peak Semikron based IGBT module • 8 Nos of IGBT’s provided with independent eight driver (inbuilt opto isolator) • All the collector and emitter terminals are brought out of proper connectors for power circuit connection • All the gate and emitter terminals are brought out and terminated on front panel to view driver output fault output • Indicator LED provided for PWM input and power supply input • Proper heat sink provided for all the IGBTs with cooling fan provision • All are enclosed by viewable acrylic cabinet • Temperature sensor provided for over temperature Protection • PWM inputs are brought out on Front Panel, you may connect any controller for interface • One common +15V Power supply for all the driver circuit, Inbuilt isolated power supply provided. • Over current protection and short circuit protection provided for all individual IGBT module • Reset circuit provided and terminated to clear the fault • Snubber capacitor provided for dv/dt protection for all IGBT module • 60A 3 phase bridge rectifier and filter circuit available for power circuit input.
Protozoa
Description
All Charts are made on PVC rexine , hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Amoeba structure & locomotion Plasmodium (Malarial Parasite), stages of development Paramecium structure Paramecium Reproduction Euglena structure & Life History Entomoeba Histolytica – structure & L.H.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Bar Breaking Apparatus
Description
To show the forces which can be exerted during thermal expansion or contraction. Comprising a heavy cast iron frame 340x120x100mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.
Microscope Slide Set Basic
Set of 25, Microscope slides created
Biology syllabus with following subjects.
Supplied in Box.
Kidney TS
Allium root tip LS, mitosis
Kidney VS, injected
Allium root tip, squash
Squamous epithelium
Moss leaf, for cells (check cells)
Leaf epidermis
Human blood smear
Stem, TS, separate bundles
Artery and vein
Mucor, asexual
Monocot (Zea) root, TS
Lung through bronchiole VS
Hair insertion
Ovary VS
Testis TS
Spinal cord, TS
Pancreas
Leaf, TS
Stem, LS old
Dicot stem apex, LS
Lung injected
Lily anther, Tetrad
Dicot & Monocot Stem
Achyranthus Stem TS
Begonia Stem TS
Bougainvillia Stem TS
Calotropis Stem TS
Casurina Stem TS
Cucurbita Young Stem TS
Cucurbita Old Stem TS
Cucurbita Stem LS
Cusuta with Host TS
Dicot Stem LS and TS on Same Slide
Helianthus Young Stem TS
Helianthus Old Stem TS Helianthus Stem TS
Mirabilis Stem
Mublenbeckja Cladode TS
Asparagus TS
Dracaena Stem TS
Grass Stem TS
Hydrilla Stem TS
Maize Mature Stem TS
Maize Stem LS
Maize Stem TS and LS, on same slide
Triticum (Wheat) Stem TS
Grease Spot Photometer
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Sonicator
Description
Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse.Features
Easy to operates & maintain with one piece S.S. Tank. Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications. Compact, rugged and highly durable systems. Extensively protected electronic circuits means longer and safer Operations.Specifications
Operating frequency 33 -3KHz, for all general purpose cleaning is highly recommended Input Voltage range of 170V AC- 270V AC, 50 Hz, Single phase Micro Controller based timer range 0 to 30/99 minutes. Thermostatic controlled temperature controller. (Ultra Sonic Bath),Complete S.S & Digital Temp.Controlled Capacity 2 Ltr Approx Capacity 3 Ltr Approx Capacity 6 Ltr Approx
DESICATOR WITH COVER
Product description:
Desiccator, Non-Vacuum, with Base, Lid and Perforated Porcelain Plate, Soda Lime Glass
Desiccators are sealable enclosures containing desiccants used for preserving moisture-sensitive items such as cobalt chloride paper for another use. A common use for desiccators is to protect chemicals which are hygroscopic or which react with water from humidity.
Size:
100mm
125mm
250mm
500mm
1000mm
Automobile Parts Actual Cut Section
This model helps the student to understand the working of automobile parts very easily. It is specially made dissectible for demonstration purposes.
1 Self Starter
2 Battery
3 Distributor
4 Ignition Coil
5 Spark Plug
6 Magneto
7 Electrical Fuel Pump
8 Mechanical Fuel Pump
9 Master Cylinder
10 Brake Cylinder
11 Gear Lubricating Pump
12 Water Pump or Water Body
13 Radiator
14 Crank Shaft
15 Cam Shaft
16 Connecting Rod
17 Piston With Rings
18 I.C. Injector
19 Speedometer
20 Shock Absorber
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
Four Stroke Single Cylinder Diesel Engine Trainer Rig
Features
• One Thermocouple provided to measure the temperature at exhaust. • One temperature indicator provided to display the temperature. • A CC tube provided to measure the fuel consumption by the engine. • Stop watch provided to measure fuel consumption in time basis • A Tachometer provided to measure the speed of the engine. • An air drum provided to measure the intake air flow. • An U-Tube manometer provided to measure the pressure head of intake air flow. • Fuel panel provided to fix the CC tube and fuel tankSpecification
• Make :Kirloskar • Power : 6 HP • Speed : 1500 rpm • Cooling type : Air cooled • Start : Hand Start • Loading type : Eddy current brake (or) • : Electrical Load (or)
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Hall Probe
Ge single crystal with four spring-type pressure contacts is mounted on the printed circuit board. Four leads are provided for connections with measuring devices.A zero setting can be done by adjusting the spring contacts with the help of screw driver.
Specifications:
Material: Ge single crystal, n type
Resistivity: 8 – 10 ?-cm
Contacts: Spring type
Mounted Joule Meter
Description
A domestic electricity meter adopted to operate single-phase 2, wire C1.2mAx8.33 A 12V 50 Hz. 0.01 rev./J and dials reading in joules. The meter is mounted on a wooden bench stand input and output socket terminals. The aluminium disc rotates once for every 100 Joules with the consumption recorded on three digits calibrated 100, 1000 and 10000 joules per division respectively. The instrument records a maximum of 99,900 Joules.
Reagent Reservoirs
The Universal Reagent Reservoir is a graduated single reagent reservoir with maximum volume of 50 ml, reservoir with 8 separate numbered 5ml.
Reagent channels & a reservoir with 12 separate numbered 5ml. Reagent channels.
Made of polypropylene these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pipettes.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Reagent Reservoir 75 ml | 12 |
Smart Grid Simulator
Smart Grid Simulator (VPST - SGS - 01) is a convenient solution for studying the basic Architecture and the Real-Time Operation of Smart Grid, Which consists of i) 8 types of Generation ii) Transmission Line iii) Six types of loads iv) Communication through LCD and PC.
Specification
• Six different generating station (Up to 10 MW) - Wind, Solar, Diesel, Bio-Gas, Fuel-Cell &UtilityGrid. • Two separate Transmission Lines (5MW Each) – TL-1, TL-2. • Six different power consumers (Up to 10 MW)– Gen.Industry, Emergency, Urban Area, Rural Area, Cement, Chemical Industry. • Six analog pot-meters for the power consumption control. • Graphics LCD & Keypad based configuration & monitoring of smart grid. • On board LCD & PC based GUI for easy understanding of the smart grid operation. • Automatic Smart Grid Control algorithm implemented for transmission line control, over current relay & automatic load sharing/adjustment in case of over loading.
PLC-SIE2 with Demo Panel Training Kit
This trainer consists of PLC, Demonstration Panel & Programming Software.
