XTEMOS ELEMENT
AJAX PRODUCTS TABS
Vertical Pipette Stand
Our Vertical Pipette Stand imparts features such as Stable, Non-Corrosive, Detachable, etc.
The Vertical Pipette Stand, offered by us, can hold 28 pipettes with maximum diameter of 14mm.
The heavy base measures 225 mm in diameter and a Polpropylene coated square rod measuring 375 mm in length is screwed into the base of the top disc.
This disk can be fixed on the rod, which has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base.
These discs can be adjusted on the rod according to the length of the pipette.
The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Pipette Stand (Verticle) - For 28 Pipettes | 1 |
Pressure Measurement Trainer
This module consists of a (0-100) psi pressure transducer of strain gauge type fixed in a pressure tank, one manually operated pump to develop pressure, pressure gauge and 3½ digital indicator to display the pressure.
Specification
• One metal pressure tank fitted with strain gauge type pressure cell. • A ball valve fitted in a pressure tank to release the pressure. • Bourden type pressure gauge provided in the tank to indicate pressure. • One manually operated foot pump to generate a pressure of the tank. • Signal conditioner for pressure cell output (0-5V) • Provision for offset/span adjustment. • A 3½ digit digital display indicator to indicate the pressure inside the tank
Fly-Wheel Unit
Description
For use with a large motor/generator and a lamp unit to demonstrate the conversion of electrical energy to kinetic energy and then back again. Comprising an iron flywheel, mounted in cast brackets with bearings. The shaft has an aluminium 'V' pulley for driving with the spring belt supplied.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Distillation Water Still (BARNSTEAD TYPE) Table Model S.S
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Orbital Shaking Incubator cum B.O.D
Specification
Orbital shaking incubator cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S sheet duly powder coated & inner chamber is made of thick S.S. sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5°C to 60°C. The temperature is controlled by Dual Display Microprocessor PID Temperature Indicator cum Controller with a accurancy of + 0.5°C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S sheet with lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital timer.Optional Accessories
Timer 0-24 Hours. Automatic voltage stabilizer 3KVA (Most rec.).Size
16 Flasks of 500ml. 25 Flasks of 250ml. 36 Flasks of 100ml.
Histology Set III
Set of 25 slides consisting of
| Appendix | Cardiac Stomach |
| Cerebellum | Ciliated epithelium |
| Cuboidal Epithelium | Developing tooth |
| Fundic Stomach | Joint articulation |
| Mammary gland | Medulla gland |
| Medulla oblongata | Osteogenesis |
| Placenta | Plyoric stomach |
| Recto anal junction | Red bone marrow |
| Salivary gland | Spleen |
| Stratified squamous epithelium | Thymus gland |
| Tongue | Transitional epithelium |
| Vagina | White fibrous tendon |
| Yellow elastic ligament |
Water Bath Tissue Flotation
Specifications
Double walled round construction. Inner chamber stainless steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80°C. Complete with indicators, wire & plug. To work on 220V AC.Chamber Size In mms (dia x depth)
200x75 250x125XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Spectrometer, Advanced
Description
Vernier reading to 30 seconds of arc. The 175 mm diameter scale is fixed. The table and telescope movements are completely independent of each other and read to 30 seconds of arc by means of double ended verniers and magnifiers. Both rotations have fine adjustment screws. Coarse adjustments can also be made by release of clamping screw. Collimator is mounted on a fixed pillar and is fitted with 175 mm fl. achromatic objective with 32 mm clear aperture and a laterally adjustable slit 6 mm long. Telescope is mounted on a movable pillar fitted with 175 mm fl. achromatic objective of 32 mm clear aperture and x 10 Ramsden eye-piece with a glass cross line graticule. Both the telescope and collimator have rack and pinion focusing and can be adjusted for leveling the axes of both units as well as for adjusting to the axis of rotation. Prism table is marked with lines to assist prism placement and has three table leveling screws. It also has an interchangeable clamping unit for the prism and diffraction grating. Complete with prism clamp, diffraction grating holder and a Tommy bar for adjusting optical axis, In case.
Newton’s Rings Apparatus
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Microscope Glass Slides – Frosted
Water Cooler Trainer
The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell. The stainless steel water tank is provided with insulation on air Sides and a door are provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a bail-operated top. Various measurements provided enable students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.
SPECIFICATIONS:
Cooling Cycle a) Compressor Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-12 refrigerant. b) Finned tube type air colled condenser with forced air flow. c) Filter cum drier for refrigerant. d) Capacity expansion device. e) Evaporator coil embraced on stainless steel water tank, Provided with glass wool Insulation. 2.Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top. 3.Measurement a) Pressure gauges for evaporating and condensing pressure. b) Thermometers to measure refrigerant temperatures at inlet and out let of condenser and evaporator. c) Dial type thermometer for water temperature. d) Rotameter to measure liquid refrigerant flow. e) Energymeter to measure compressor Input. 4.Safely & Controls – a) Thermostat to put off compressor at set water temperature. b) Pressostat to put off compressor if high or low pressure Goes out of set limit. c) Over load protector for compressor, A technical manual will be supplied along – with the unit. Also, the unit is provided with an attractive and anti corrosion powder costing.SERVICES REQUIRED:
1.Floor space of 1.5 m. X 1.5 m. 2.Water supply of 5 lit/min, 3.230 V, 15A AC stabilized supply with earthing connection
pH Meter, Digital, Portable
Highly stable and accurate.
Digital display.
Technical Specification
Display: 3½ digit LCD Range: pH : 0 to 14.00 Resolution: pH : 0.01 Accuracy: pH : ±0.01 Compensation: Manual 0 to 100° Slope Correction: 80 to 120% Power: 1 x 9V Battery Dimensions: 85 x 28 x 165 mmAccessories
Combination pH Electrode Operation ManualXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Bottle Cap Sealing Machine
Specifications
Bottle Cap Sealing Machine which is used by the industries for sealing the cap of the bottles. It is supplied with complete electric fittings accessories. Finds usage in pharmaceutical, chemical and food & beverage industries, the offered range is available in different specifications, in order to meet the variegated expectations of our valuable customer. Our provided Bottle Cap Sealing Machine is tested by the team of our professionals. Furthermore, our clients can avail the entire range from us at market leading prices. (a) Hand operated. (b) Electrical operated.
Friction In Pile Lines Apparatus
DESCRIPTION:-
The Set-up consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.EXPERIMENTS:-
Ø To determine the losses due to fiction in pipes Ø To determine the friction factor for Darcy Weis back equationUTILITIES REQUIRED: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATION: –
Ø Pipes (2 Nos.) : Material GI of ½ “ & 1” Diameter Ø Pipe Test Section : Length 1 m Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank with Piezometer,Capacity 25 Ltrs. Ø Sump Tank : Stainless Steel, Capacity 50 Ltrs. Ø Stop Watch : Mechanical / Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. The whole Set-up is well designed and arranged in a good quality painted Structure
Number Mat
Get kids to think on their feet! Number mat is fast and crazy quiz games make learning math fun!Kids listen the equation from teacher, do the math, and then step on the right answer. Play different games to reinforce numbers, counting, addition and subtraction up to the number 25. Great for classroom use. Mat measures 20 feet in length.
