XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Study Of Pipe Fitting

DESCRIPTION:-

The Set-up consists of a ½ bend and elbow, a sudden expansion & sudden contraction fitting from 15 mm to 25 mm, ball valve and gate valve. Pressure tapings are provided at inlet and outlet of these fittings under test. A differential manometer fitted in the line gives pressure loss of individual fitting. Present Set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTS:-

Ø To determine loss of head in the fitting at various water flow rates. Ø To measure the loss co-efficient for the pipe fittings.

UTILITIES REQUIRED: –

Ø Water Supply and Drain Ø Electricity Supply: Single Phase, 220 V AC, 0.5 kW.

TECHNICAL SPECIFICATION: –

Ø Sudden Enlargement : From 15 mm to 25 mm Ø Sudden Contraction : From 25 mm to 15 mm Ø Bend : ½ Ø Elbow : ½ Ø Ball Valve : ½ Ø Gate Valve : ½ Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank with Piezometer, Capacity 25 Ltrs. Ø Sump Tank : Capacity 50 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. The whole Set-up is well designed and arranged in a good quality painted Structure

Plantation Pots

Plantation Pots, moulded in polypropylene, are available in four different sizes. The Plantation Pots have a downward extended rim, which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose. Material : Polypropylene
ParticularsPack (Pcs) 
Plantation Pots 100 mm20 
Plantation Pots 150 mm20 
Plantation Pots 200 mm20 
Plantation Pots 250 mm20 
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Burner Bunsen – Semi Micro

Description

Nickel plated burner tube with rotatable air regulator on enamelled die casted base with a tapered riffled gas inlet.
Burner tube dia. 10 mm and height 60 mm.
Base dia. 80 mm
Overall height 95 mm and inlet tube 10 mm dia.

Plantation Pots

Plantation Pots, moulded in polypropylene, are available in four different sizes. The Plantation Pots have a downward extended rim, which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose. Material : Polypropylene
ParticularsPack (Pcs) 
Plantation Pots 100 mm20 
Plantation Pots 150 mm20 
Plantation Pots 200 mm20 
Plantation Pots 250 mm20 
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Pipette Stand, Wooden – Horizontal

Description

Wooden and polished, to hold 12 pipettes horizontally. Height 23 cm width 26 cm and depth 12 cm

Specifications:

Length: (in)12.0 Width: (in)9.0

Brush, Semi Micro

Micro bristle head with, on wire handle. Cotton tip head.

Diameter x Head langth (mm)Overall Length (mm)
12 x 100200 
20 x 100 200 

Human Circulatory System

Description

Illustrating the complete blood circulation in veins and arteries, mounted on board with key card.

Masses Iron

Hexagonal with lifting ring within international tolerance. Weights are 50gm, 100gm, 200gm, 500gm, 1000gm, 2000gm, 5000gm.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Annelida

Earthworm Buccal Region TS Earthworm Pharynx Region TS Earthworm Spermathica Region TS Earthworm Oesophagus Region TS Earthworm Seminal Vesicle Region TS Earthworm Prostate Gland Region TS Earthworm Testis Region TS Earthworm Intestinal Region TS Earthworm Gizard Region TS Earthworm Clitellum Region TS Earthworm Typhlosolar Region TS Earthworm Anterior Region Sag. Sec. Earthworm Ovary WM Earthworm Setae WM Earthworm Septal Nephridium WM Nereis Parapodium WM Heteronereis Parapodium WM Nereis Body TS Leech Crop Region TS Leech Stomach Region TS Leech Intestinal Region TS Leech post. Sucker TS Leech Ant. Sucker TS

Conical Friction Clutch Working Model

Conical Friction Clutch – Working Model Properly constructed model. Complete on base with operating lever.

Masses, Slotted

Solid brass, Accurate machined masses placed on a plastic and metal rack with handle. Set of 8: 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, and 1x500 gm, Total 1100 gm. Set of 10: 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1100 gm. Set of 12: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, 1x500 gm, Total 1110 gm. Set of 14: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1110 gm.

Demonstration Meter Inter Scale

Description

Housed in a ABS plastic case 300x150x300 mm with glass front and rear. Moving coil type with accuracy of + 2.5%. Basic sensitivity of meter is 5 mA, 100mV f.s.d. The meter can be used to demonstrate the working principle of AC or DC ammeters or voltmeters with the interchangeable plastic scales. DIFFERENT DIALS ARE AVAILABLE.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Laboratory Timer

This is a versatile timer quartz crystal controlled for very high accuracy. which can be used for conducting experiments related to timing and motion with high accuracy. Can be used for G by free fall liner air tracks, dynamic trolleys etc. This timer has an in built power supply for the coil for G by free fall apparatus and lamps for photo gates. Range : 0.001, 0.01, 0.1 Sec. The above timer has a built in power source for photo gates and the coil for 'G' by free fall apparatus.

Gear Pump Test Setup

DESCRIPTION:

The Set-up is designed to study the performance of Gear Pump. The Set-up consists of a Gear Pump having a pair of meshed gears coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum Gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided.

EXPERIMENT:

Ø To determine overall efficiency and pump efficiency of the Gear Pump Ø To plot Head vs. Discharge, Pump efficiency vs. Discharge

FEATURES:

Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & Maintain

UTILITIES REQUIRED:

Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Oil Supply: Oil @ 30 Ltrs. (Optional extra cost)

TECHNICALS SPECIFICATIONS:

Ø Pump : Gear Pump with pair of meshed gears Capacity 1 HP,Speed 1500 RPM (max.), Head 5 Kg/cm2 (max.) Ø Drive : AC Motor with step cone pulley arrangement for 3 prefixed speed DC Motor with DC Drive along with (non-contact type Digital RPM Indicator Ø Supply Tank : Capacity 30 Ltrs. Ø Measuring Tank : Capacity 20 Ltrs. fitted with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Control Panel : With required electrical instrumentation (The whole Set-up is well designed and arranged in a good quality painted structure.

Digital Gauss Meter

Digital Gauss meter works on the principle of Hall Effect in semiconductor. When a semiconductor with current flowing in one direction is introduced perpendicular to a magnetic field a voltage is produced at right angles to the current path. The magnitude of this voltage is proportional to the intensity of the magnetic field. This voltage is called Hall Voltage. This Hall voltage is amplified and calibrated as magnetic field. Specifications: Range: 0-2 KG & 0-20 KG Resolution: 1 G at 0-2 KG range Display: 3½ digit LED Power Supply: 220 V, ±10%, 50 Hz AC Transducer: Hall probe-InAs

Latent Heat of Steam Apparatus

Description

Consists of a thick brass calorimeter 90 x 65 mm, a bung with steam inlet and outlet tubes, a felt cover and a one liter brass sheet boiler with bung to take the steam tube.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture