XTEMOS ELEMENT
AJAX PRODUCTS TABS
Pole Holder
Description
We are supply of high quality Pole Holders for prisms. These have been manufactured using the finest quality of aluminium and brass, in order to ensure their strength and durability. We provide the poles in the shape of a tripod for increased sturdiness while holding prisms and other survey instruments. We also offer customization and can supply these products in accordance with the demands of our clients.The specifications of the Pole holder :
• Manufactured using fine quality aluminium and brass • High on parameters like strength and durability • Improved sturdiness while holding survey instruments
Bridge Rectifier
Bridge Rectifier is made of four diodes connected in a bridge circuit. It is housed in a plastic moulded box. This bridge rectifier converts alternating current (AC) into direct current (DC). It provides the same output polarity for either input polarity. All the electronic devices require direct current, so bridge rectifiers are used inside the power supplies of almost all electronic equipment. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
Spectroscope
Description
Hand held simplest form of spectroscope. It can be used to get a general idea of the correlation between wavelength and observed color. A diffraction grating is used which spreads the incident light into its component wavelengths. An illuminated reference scale against which the spectrum may be viewed is also provided. Spectroscope (Wooden)
Soft Loop Sterile
We offer Soft Loop Sterile to our esteemed clients.
The Soft Loop Sterile is a non-toxic disposable loop, which is accurate to semi quantitative stand for handling samples.
Moreover, the Soft Loop Sterile offered by us is widely used for diverse laboratory applications and can be availed at leading market prices.
Material : Polystyrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Soft Loopes - 1 μl | 100 | |
| Soft Loopes - 10 μl | 100 | |
| Inoculation Needle | 100 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Android Based WSN Evaluation Kit
We are pleased to introduce a trainer which offers all the components (ARM 11 processor Board + GSM module + CMOS Camera + GPS module + ZigBee module +SD Wi-Fi module) of a Smart Cell Phone which works on Android OS which also Occupies 50% of the smart cell phone market. This Development Board gives you an Comprehensive solution integrating both hardware and software. These features make it easily and widely used in MID development, auto electronic devices, industrial applications, GPS systems and multimedia systems. It is good for educational training, embedded development and DIY as well.
Features
• ARM11 Samsung S3C6410, ARM1176JZF-S, up to 667MHz • 256MByte mDDR RAM and 1GByte NAND Flash • 1 x 4-wire resistor touch screen interface, • 1 x 100M Ethernet interface, • 1 x DB9 5-wire serial port • 1 x Mini USB 2.0-OTG interface and USB Host 1.1 interface, • 1 x 3.5mm audio output and on board microphone interface, • 1 x TV-OUT • 1 x SD card socket, • 1 x Infrared receiver, • 4 x TTL serial port, • 1 x CMOS camera interface, • 1 x SDIO2 interface (can be connected to SD WiFi module), • 1 x 10pin JTAG interface, • 1 x PWM buzzer, • 1 x I2C-EEPROM, • 1 x backup battery for RTC, • 1 x AD adjustable resistor, • 8 x User button and 4 x LED
Digital Meters
Tablet Making Machine (Hand Operated)
Details
Single punch automatic compression and injection device with each revolution of the wheel drive automatic feed and remove of tablets. Built on heavy cast body with centric pressure system SS hoper provided and connected by a rubber tube easy setting for thickness and hardness of tablets with nuts and locknuts.Features
Easily rotating wheel for making tablets. Compressing lever for adjustable harness of tablets. Adjustable lower punch for adjusting the thickness. Stainless steel day and punch size 6, 9, 12 mm. Electrical model can be provided in same with ½h.p motor.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Car Chassis All Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.
Siemens IoT 2040 Gateway Based IoT Development System
SIMATIC IoT 2040 is an Industrial IoT Gateway, reliable open platform for collecting, Processing and transmission data. It helps the students to get the industrial IoT experience and develop Industry 4.0 Projects rapidly.
Specification:
• IoT 2040 Gateway - PLC and sensors of many brands can be integrated through Ethernet & Serial ports. - Open Protocols: Modbus, Profinet, REST or MQTT, AMQP, OPC UA - Based on Intel Quark X1020 ,(x86)@400MHz - Compatible With Open Source Software Arduino IDE and Yocto Linux - High level language support : Java, Python, C/C++ - 1 GB RAM, 8MB Flash ,256KB SRAM - Micro SD card Slot up to 32GB - One miniPCIe Slot for hardware expansion for WLAN/Additional Ethernet Port - Arduino Uno – R3 Compatible - Intel Wi-Fi + Bluetooth Module for 300MB data rate - 2xRS232/422/485(Switchable) - 1xUSB Controller + 1 x Device - 2 x 10 /100 Mbps Ethernet RJ45 • 5 types of sensors such as Temperaturesensor, LDR sensor, Motion sensor, Humidity sensor, Magnetic sensor included to • interface with IoT2040 & add on modules of IoT2040 • The IoT 2040 Gateway can communicate with PLC, DCS using profinet or OPC UA. • Analog Inputs are terminated in a SP7 patch connector • 4Nos of Digital Input SPDT Switch • 4Nos of user LEDs
Linear Expansion Apparatus
Consisting of a metal rod, 500mm in length and 4.5mm diameter, enclosed in a well lagged, nickle plated brass tube with three tubules for steam, inlet, outlet and thermometer.
The metal rod to be studied is supported in the steam jacket by detachable conical cups situated at each end of the tube.
The apparatus is carried on a heavy gauge channel base at one end of which is an adjusting screw.
At the opposite end is a micrometer screw reading to 0.01mm for measuring the expansion.
Supplied complete with copper, brass & iron rods but without thermometer.
Spring Unit of Mechanical Model
Description
For showing potential energy in a wound-up spring and its conversion to electrical energy by driving a dynamo and lighting a lamp. May also be used to wind up a weight on a cord showing the change from potential energy to kinetic and back to potential in the raised weight. The steel shaft carries a clock spring with a free wheel device and winding ratchet, also an aluminium 'V' pulley 56 mm. diameter. One end of the shaft overhangs the base for use as line shaft when winding up a weight. Dimensions 220 x 100 x 100 mm. high Supplied complete with driving belt.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
CNC Lathe Trainer
Controller:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with Ramp function Input to Stepper : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled with software Interpolation : liner / Circular /Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation /canned Threading : Straight/Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 300mm Longitudinal Travel : 310mm Weight : 800kg Dimension in mm : 1300 x 800 x 1400 Rapid Travel : 700mm/min Resolution Z Axis : 5micron Resolution X Axis : 5micron Automatic : providedAXIS TRAVEL:
X Axis : 80mm Z Axis : 310mmSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 2 HP Inside Taper : MT3 Speed Range : 50 to 3000Rpm
Water Tap, Swan Neck, Heavy
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Decade Inductance Box – 3 Dial
Spartan 6 Trainer Kit
Features
• 16 Nos. of digital input using slide switches with LED indication • 16 Nos. of digital output using discrete LEDs • 16× 2 LCD is provided for display the text message. • One Reset Switch • One switch for giving manual clock • FPGA configuration through - On board Xilinx USB to JTAG Programmer with isolation to configure FPGA - On board Flash Prom XCF04S (Programmable through USB to JTAG programmer) • Total 186 I/O Pins: 100 Pins used for integrating peripheral like LED, Switches etc., balance pins are available to user • In 3nos of 20 pin header. • 1 No of 26 pin header to interface VLIM cards like Traffic Light Controller / On-board TLC (factory settable). • On board programmable PLL oscillator from1 MHz to 100MHz using jumpers • 4Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor drive provided on board (Motor Optional) • 4x4 matrix key provided • On board I2 C RTC Interface • On board Temperature Sensor Interface • SPI Based Analog to Digital Converter
Gear Box Actual Cut Section
Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Refrigeration Trainer Electrolux Type
This type of refrigeration is usually used for domestic purposes only as it is complex in the construction and working. This type of refrigerator was developed in 1925 by Munters and Battzervan when they were studying at Royal Institute of Technology At Stockholm for their undergraduate course. This type of refrigerator was known as three fluid refrigeration system. The elimination of aqua pump from the absorption system with the complete absence of moving parts and work input. The main purpose of removing the pump was to make the machine noiseless. It uses refrigerant as a solvent s and an inlet gas for inlet of the system. The inert gas is continued to the lower side of system only by its system. It is possible to maintain the uniform pressure throughout the system and after sometime permitting the refrigerant to evaporator at low temperature corresponding to its partial pressure. In the high pressure side system (generator and condenser), there exists only the refrigerant which is subjected to total pressure of the system so that it is condensed by using normal cooling water as air as it is done in other system.
The strong aqua ammonia solution is heated in generator by the application of external heat source. The water vapor carried with ammonia vapor is removed in separate form as shown in figure. Then the dry ammonia vapor is passed into the condenser and it is condensed by using external cooling source. The liquid ammonia flows under gravity in the evaporator and it evaporates. The mixture of hydrogen and ammonia vapor is passed into the absorber and the weak solution from aqua ammonia from the separator is allowed to follow into the absorber, through tray this weak aqua ammonia solution comes into contact with hydrogen separated. This strong solution is further passed to the generator and it completes the cycle.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Spectrometer, Standard
Description
Reads to 6 minutes of arc (0.1°) 170 mm diameter metal scale graduated 360° x 1°, independently rotatable, with locking screw, vernier attached to the telescope reads to 0.1° (6 minutes of arc). Collimator is mounted on a fixed pillar, with an achromatic objective of 150 mm focal length and 21 mm aperture, and has an adjustable slit 6 mm long. The telescope is on a movable pillar, with a fine adjustment screw, an achromatic objective of 170 mm focal length, 21 mm aperture, Ramsden eye-piece and glass crosswire graticule. Both collimator and telescope have spiral focusing system and have axis adjusting arrangement. The table has 3 leveling screws, with lines marked to assist prism placement. With prism and grating holders, one small screw driver and one Tommy bar for axis adjustment Without prism.
Air Core Solenoid
Description
Air Core Solenoid helps investigate the magnetic field of a long coil. It can also used with the Current Balance as an accessory to measure the force on a conductor in a magnetic field. The solenoid has coils wound on a plastic tube with approximately 575 turns of copper wire. It can carry a current of 5 A continuously or 10 A intermittently.
Laboratory Stirrer
Laboratory Stirrer (Mechanical Stirrer)
Fitted with speed regulator, height and space adjustable 1/20 H.P.
AC/DC Motor.
Features
Stir power: 150 W. Stirring and heating volume: up to 80L (H2O). Stir speed: 60- 1500rpm. rotate speed display, time accurate, acceleration precise structure, bidirectional mixing.
Gd Skin Color Advanced Trauma Simulator
Description
Features:
Washing, disinfection, hemostasia, enswathement etc. Open fracture, truncation trauma.Features of Advance trauma manikin:
Facial burn: I, II, IIIdegree. Laceration in forehead. The wound in jaw. Opened clavicular fracture and contusion wound on the chest. The wound in abdomen with small intension evisceration. Opened humerous fracture of right upper arm. Opened fracture of right hand (including parenchyma laceration, fracture and bone tissue exposure) Gun wound in the right palm. Opened fracture of right thighbone. Compound femur fracture of left thigh. Metal pricking wound in right thigh. Opened tibia fracture of right leg. Opened fracture of right foot with truncating trauma on small phalanx. Burns in left forearm: I, II, III degree. Truncating trauma on left thigh. Closed tibia fracture of right leg and contusion wounds in left ankle and foot.
