XTEMOS ELEMENT
AJAX PRODUCTS TABS
Burner Bunsen-Economy
Description
This is one of most inexpensive option without flame stabilizer. The burner tube is made of brass and mounted on pressed steel powder coated base. Base dia is 80 mm. overall height of burner is 135 mm burner tube dia 12 mm. Suitable for LPG / Butane gas.Burner Specifications :
Tube Dia. - 12 mm Height - 130 mm Weight - 160 g
Tuning Fork Activator
Magnetic Numbers
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
CO-AXIAL CONDENSER CLAMP
Frequency Response Analysis of Lead Lag Network
Frequency response of Lead, Lag network using P+I+D controller is a special purpose analog simulation, create using operational amplifiers. This simulator permits a detailed analysis of the first order and second order systems on the application of proportional, integral and derivative control to the improvement of their performance. The simulator may be used at high frequency for oscilloscope observation.
FEATURES:
• Built-in Function Generator (sine & square). • Self contained power supplies and power ON/OFF switch with indication. • Full mimic diagrams in the front panel. • The simulated process. - Simple Lag Process - Simple Lead Process • The simulated PID controller - Integral controller scaled in Integration time. - Derivative controller scaled in derivative action time. - Proportional band control scaled in % proportional band (PB).
Floating Magnet Set
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Meiotic Cell Division
Seven Segment LED Display Circuit
A common anode seven segment module is fitted on a board with 8 bit dip switch to control the each segment of seven segment LED display. The inputs A-D of a display driver are connected to the binary coded decimal (BCD) outputs from a decade counter. A network of logic gates inside the display driver makes its outputs a-g become high or low as appropriate to light the required segments a-g of a seven segment display. A resistor is required in series with each segment to protect the LEDs
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Refrigeration Air Conditioning Tool Kit
Ray Box
Description
To provide a simple means of producing single or multiple rays of light for use in elementary optics. Made of die-cast alloy, the ray box has an open front and vertical internal grooves to accommodate a slit plate and a cylindrical lens. Supplied complete with a metal plate having single and triple slits, a 12 V 24 W SBC line filament lamp and a lamp holder.
Ball & Ring seperate
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
REDWOOD VISCOMETER
PRODUCT DESCRIPTION
Oil & Petroleum Testing Instruments is widely acknowledged for its high functional efficiency, excellent results, accuracy, robustness, ability to withstand extreme working conditions and low maintenance requirements. Technically advanced and durable, these instruments are offered at industry leading prices in different specifications as per the requirements of the clients.
Optech Scanner
Description
Optech ILRIS Laser Scanner is fully portable, laser based ranging and imaging system for the commercial survey, engineering, mining and industrial markets. A compact and highly integrated instrument with digital instrument with digital image capture and sophisticated software tools, ILRIS is an industrial leading solution that addresses the needs of commercial users.
Profile Projector 200mm Dia
Specifications
Bench type Profile projector is a highly precision instrument designed for most diversified jobs at industries & engineering colleges. It consists of antiglare hard glass SCREEN 200mm DIA with cross line rotatable through 360 degree with least count of 2 minute an arc. The working table is secured on a heavy hollow base provided with X-Y movement, travel upto 25 X 25 mm ,equiped with zero adjustment Micrometers of 25mm graduation having least count 0.005 mm.
Technical:
| Colour | : | White |
|---|---|---|
| Work Stage | : | 150 mm X 150 mm |
| Magnification | : | 10 X |
| Travel X & Y | : | 25 X 25 mm |
| Micrometer Head | : | 0 to 25 mm with accuracy 0.005 mm/0.01 mm |
| Screen Dia | : | 200 mm, 360 degree rotatable Frosted glass Screen graduated scale. |
| Illumination | : | 12 volt-100 Watt (Counter), 6 Volt-2o Watt (Surface) |
| Power Required | : | 220-230V AC, 50 Hz |
Main Parts of Instrument :
Screen 200mm Dia with Cross Line. Clips to hold Drawing or films. 360 degree rotatable graduated ring. Surface Light Lamp. Objective (Projection Lens). Micrometer Head with least count of 0.005mm X-Y Stage travel upto 25 X 25mm Focusing Knob for up & down motion.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Polarising Filter Stress Determination
Description
Demonstrate stress patterns in solids with this new and valuable equipment. Two polarising filters, mounted on a graduated frame are placed on a plastic base. Clear acrylic pieces of different shapes are introduced between the filters; when pressure is applied to the solids the resulting stress patterns are observed. An important method of demonstrating polarisation and stress. Includes instructions.
TEST TUBE STAND-ALUMINIUM STAINLESS STEEL
PRODUCT DESCRIPTION
Test tube supports (racks), S-shaped, made of a single heavy sheet of aluminum or stainless steel bent to form a solid, stable base with two perforated shelves. Smooth, flat surfaces simplify cleaning.
Available in different size and holes:
12mm, 12 Hole
12mm, 24 Hole
15mm, 12 Hole
15mm, 24 Hole
18mm, 12 Hole
18mm, 24 Hole
25mm, 12 Hole
25mm, 24 Hole
Demonstration Gear Model System
Description
A series of models to demonstrate different gearing systems. With transparent slideplates, the gears may easily be seen and where necessary there is an index on the primary and secondary shafts to show the change in the direction of rotation and the relative speed of rotation. A simple three-speed and reverse-gear system using spur gears. Reverse gear is obtained by interposing a small lay-shaft mounted pinion between the two main shafts. Gear selection is by means of a short ball-ended lever.
Constant Mesh Gear Box Actual Cut Section
Constant Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
