XTEMOS ELEMENT
AJAX PRODUCTS TABS
Wankel Engine Model
The model demonstrates the principle, operation. It is cutaway to show the internal constructional details. Unlike other engines the rotary piston engine avoids reciprocating parts. The power pistons an arch like triangular rotor which on rotating generates an epitrochoid. Mounted on metal base with printed diagrams.
PIPETTE BULB
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Slotted Mas Set-Cast Iron
Sonicator
Description
Ultrasonics (Ultrasound) is the sound which human beings cannot hear. Ultrasound utilizes frequencies from and above 18khz (18,000 cycles per sound) High frequency electrical energy is converted into ultrasound waves by means of ultrasonic Transducers, which are bonded on the base of S. Cleaning Tank. These high frequency sound waves create in the liquid countless, Microscopic vacuum Bubbles which rapidly expand and collapse.Features
Easy to operates & maintain with one piece S.S. Tank. Digital Tuning of Transducers with Generators to avoid any frequency shifted even during demanding applications. Compact, rugged and highly durable systems. Extensively protected electronic circuits means longer and safer Operations.Specifications
Operating frequency 33 -3KHz, for all general purpose cleaning is highly recommended Input Voltage range of 170V AC- 270V AC, 50 Hz, Single phase Micro Controller based timer range 0 to 30/99 minutes. Thermostatic controlled temperature controller. (Ultra Sonic Bath),Complete S.S & Digital Temp.Controlled Capacity 2 Ltr Approx Capacity 3 Ltr Approx Capacity 6 Ltr Approx
Needle Steel Handle
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
L Shaped Spreader
We are a prominent Exporter & Trader of L Shaped Spreader.
The L Shaped Spreader is sterile & smooth and enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.
Avail the L Shaped Spreader from us at nominal market prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| L Shaped Spreader | 100 | |
| Micro Pestle (for 0.5 and 1.5 ml MCT) | 12 | |
| Micro Pestle (for 1.5 ml MCT) | 12 |
Shell Tube Heat Exchanger Water To Water
Heat exchanger is the devices used to transfer the heat from one fluid to other. The shell and tube heat exchanger is two tube single pass heat exchanger. The hot fluid is hot water obtained from water heater. The coil fluid is cold water. The schematic flow arrangement is shown in figure. Hot water enters the lower side of end box, flows through the tubes in lower half of shell and comes to the other end of the shell. It reverses its direction, flows through tubes in upper half of the shell and leaves out. Cold water enters lower part of the shell passes over the tubes between the baffles and leaves out the shell through outlet at upper surface of shell.
SPECIFICATIONS:
1.Shell – 150NB, 750 m.m. long provided with end boxes. a.One end box with divider plate. b.25% cut baffles – 4 Nos. in the shell. 2.Tubes – 4.5mm I.D., 6.35mm O.D.,250 m.m. length copper tubes with triangular pitch. 3.Instantaneous water heater, 3 Kw capacity, to supply hot water. 4.Thermometer for measuring the water temperature. 5.Valves to control hot and cold water flow.SERVICES REQUIRED:
1.3 P H, AC supply 2.Floor space 1.5m. X 1m, 3.230V, 15A, AC supply with earthing connection. 4.Water supply at the rate of about 10 lit/min at constant heat.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Pneumatic Trainer Basic
LIST OF EXPERIMENTS
1.Operation of a Single Acting Cylinder 2.Speed Control Of Single Acting Cylinder 3.Operation of a Single Acting Cylinder with And Gate 4.Operation of Pneumatic Motor 5.Speed Control of Pneumatic Motor 6.Operation of D/A Cylinder with 5/3 Way Lever Operated DC Valve 7.Speed Control of D/A Cylinder with Flow Control (Meter In) 8.Speed Control of D/A Cylinder with Flow Control (Meter Out) 9.Speed Control of D/A Cylinder with Flow Control in Forward & Return Stroke 10.Sequencing of Motor & Double Acting Cylinder 11.Sequencing of D/A Cylinder with Single Acting Cylinder 12.Operation of Single Acting Cylinder with 5/2 Way Single Solenoid 13.Operation of Double Acting Cylinder with 5/2 Way Single SolenoidSALIENT FEATURES
1.Mobile self contained unit. 2.Simplicity of operation and designed for immature use. 3.Industrial components and circuits are demonstrated in the circuit. 4.Pneumatic valves of Shrader / Festo/ SMC or equivalent only. 5.Performance Guarantee of two years for any manufacturing defect. 6.Modular design with fitment of component at any corner of trainer. 7.Specially designed quick coupling.
Human Ear, 3 Parts
Simple Galvanoscope
Chik
Ovary TS Showing Oogenesis
Testis TS Showing Spermatogenesis
Primitive Streak TS
24 Hrs. Embryo TS Somite Region
36 Hrs. Embryo TS Typical
48 Hrs. Embryo TS Eye Region
48 Hrs. Embryo TS Heart Region 60 Hrs. Embryo TS Typical Region
72 Hrs. Embryo TS Heart Region
72 Hrs. Embryo TS Eye Region
48 Hrs. Embryo Sag. Sec.
60 Hrs. Embryo Sag. Sec.
72 Hrs. Embryo Sag. Sec.
96 Hrs. Embryo Sag. Sec.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Measuring Cylinder (Hexagonal Base)
We bring forth high quality Measuring Cylinder (Hexagonal Base) for our esteemed clients.
The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent.
These Measuring Cylinder (Hexagonal Base) are high on demand for their quality.
We source them from reliable manufacturers.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Measuring Cylinder 10 ml (Hexagonal) | 24 | |
| Measuring Cylinder 25 ml (Hexagonal) | 12 | |
| Measuring Cylinder 50 ml (Hexagonal) | 12 | |
| Measuring Cylinder 100 ml (Hexagonal) | 12 | |
| Measuring Cylinder 250 ml (Hexagonal) | 6 | |
| Measuring Cylinder 500 ml (Hexagonal) | 4 | |
| Measuring Cylinder 1000 ml (Hexagonal) | 3 |
Draining Basket
We are known as the chief Exporter and Trader of the latest Draining Basket in India.
As the name suggests, the Draining Basket are available with wide net like structures on all sides.
These structures are proved really useful for draining different laboratory apparatus after washing them.
Made of polypropylene, Our Draining Basket can be repeatedly autoclaved.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Draining Basket 400 x 400 x 100 mm | 6 |
Dissecting Microscope with Bull Lens
Specifications
Heavy stable round base, Focusing done by Rack & Pinion system, with stopper to limit the downward movement of the Eye piece towards stage. A adjustable holder is provided for moving magnifying lens over full area of the stage. It is easily replacable with Bull Eye Lens 80mm in dia. A plano concave mirror in fork mount for light reflection, sturdy removable hand rests and arrangement for inserting Black & white plate. Duly packed in wooden cabinet with the following optics:| Eye piece: | 10x & 15X and Bull Eye Lens 80mm dia. | |
| Stage size: | 100mm x 100mm |
Horse Shoe Magnifier
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Lagged Pipe Apparatus
Lagged Pipe Apparatus:
The apparatus consists of three concentric pipes mounted on suitable stand. The space between innermost and the middle pipe is fifed with a lagging material and the space between the middle and the outer most is filled with and other lagging material. The lagged pipe is heated with a cartridge heater inserted at the axle length of the pipe. Voltmeter and ammeter on the panel can measure the input to the heater. The intermediate temperatures can be measured by the thermocouples attached at the surfaces of the pipe. Thus the resultant conductivity of the materials can be found out.
SPECIFICATIONS:
1.Pipes : a)Gl pipe (innermost) – 6 cm. (Outer Diameter). b) Gl Pipe (Middle) – 8.5 cm. (Mean Diameter) c)G! Pipe (Outermost) – 10.7 cm. (inner Diameter) d)Length of pipes 1 Meter. 2.Heater : Nichrome wire cartridge heater placed centrally, of suitable capacity. 3.Control Panel : a)Single Phase Dimmerstat – 1 No. b)Voltmeter (0 – 250V) – 1 No. c)Ammeter (0- 2A) – 1 No. 4.Temperature Indicator : Multichannel Digital Temperature Indicator ranging (0 – 300 C) using Cr/AI ThermocouplesServices Required:
1. A.C. Single Phase 230 V electric supply 2. Floor Area-1.5 Meter X 1 Meter X 0.5 Meter High
Level Process Station
Panel Features
• Digital Panel Meters. • Mimic diagrams. • Pressure gauges are provided, wherever necessary. • Level switches are provided for overflow indication.Features
• The Level Process Station is an attractive module. • All are the industrial (4-20) mA standard interfacing signals. • It provides a real industrial feeling of the processes to the students. • A RF Capacitance level transmitter is used to sense the level (700mm) of tank. • An Electronic Regulated Power supply is fixed for voltage regulation. • An Air regulator cum filter is provided to regulate the air pressure. • An Industrial standard electro pneumatic converter is mounted to control the control valve. • A Globe pneumatic control valve is used to control the flow rate • All the air flow lines are fitted by flexible hoses/fittings for better reliability. • A Rotameter (1000 LPH) is provided for Visual Indication of flow rate. • A Transparent Process Fiber tank (800mm) with graduated level scale. • A Solenoid Valve is provided for Load Disturbance study. • A Rust proof Reservoir Tank (SS) capacity of 45 Liter. • By pass line is provided to avoid pump over loading. • A Centrifugal Pump is used for water circulation. • All components are fixed in a mobile rack. • All water flow lines are fitted by SS pipes. • USB/Serial port data acquisition is provided.
Window Air Conditioning Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
