XTEMOS ELEMENT
AJAX PRODUCTS TABS
Xilinx Spartan 3E FPGA Trainer Kit
Specification
• XC3S250E - 4PQ208C / XC3S500E-4PQ208C • 16 Nos. of digital input using slide switches with LED indication • 16Nos. Of digital outputs using discrete LEDs • 16 x 2 LCD is provided for display the text message. • One Reset Switch • One switch is provided for giving manual clock • FPGA configuration through - JTAG Port - On board Flash Prom XCF02S • Total 158 I/O pins : 124 pins used for integrating peripherals like LED, Switches etc., balance pins available to user in 20 pin • header (3.3V compatible) • 1No of 26pin header to interface VLIM cards like Traffic Light Controller (5V compatible) • On board programmable PLL oscillator from 1 MHz to 100 MHz using jumpers • 4 Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor Driver provided. • 4 * 4 matrix key provided • Housed in a sleek plastic cabinet with built in SMPS 5V/2A. • Compatible with Xilinx ISE Design Suite WebPACK Software. • On board USB to JTAG is available for configure FPGA (Supports only with Vi JTAG 5.0 Software)
Forceps (Different Types)
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Human Eye, 5 Times Enlarged
Description
A highly improved and enlarged model showing fine details in three dimensional relief. Cut in horizontal plane and separable in seven parts. After removing the upper half of the sclera (outer shell). The choroid with its verticose veins is exposed with the removal of second shell, details of the retina come into view and the position of the yellow and blind spots is quite visible. All important anatomical features such as muscle insertions, optic nerve, blood vessels, ciliary body, cornea, crystalline lens, and iris etc are clearly numbered and are identifiable. Mounted on base with key card.
Cooling System Of An Automobile
In this model the working of a cooling system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a cooling system of a car are shown in actual working form. This model helps the student to understand the working of the cooling system of a car very easily. It is specially made dissectible for demonstration purposes.
3 Axis Robotic Trainer
For beginners, this Trainer is very useful to learn the concept and working of a Robo. For experienced people, this helps to make new ideas. This is used to study the ROBO characteristics of arm movement. Each axis has one AC servo motor. Gripper has one miniature cylinder to pick and place the object. Software controls the ROBO arm and measures the motor axis and arm axis. Simplicity of this kit makes maintenance easier and friendly to user. This kit is very flexible to operate and easy to move. Windows based user friendly software to control the arm through microcontroller having the flexible features such as
Features
• Easy to learn • New design • Easy for maintenance • Drive by AC servo motor • Easy to programSpecification
• Arm : Jointed Arm • Axis : 3 • Motor : AC servo Motor • Gripper : Pneumatic • Drive : AC servo Motor Drive • Controller : MicrocontrollerBase
• Angle of movement : 300º • Gear Type : Spur Gear • Position Detector : Limit SwitchIntermediate ARM
• Angle of movement : 90º • Gear Type : Spur Gear, Worm Gear • Position Detector : Limit SwitchVertical ARM
• Angle of movement : 90º • Gear Type : Spur Gear • Position Detector : Limit Switch
Advanced Nursing Baby
Description
This Advanced Nursing Baby Manikin is specifically designed for professional nursing training. This high quality manikin will provide wide range of exercises possible including both first aid and emergency situations.BASIC NURSING SKILL:-
Movable head, neck, hand and foot Cephalic vein puncture Umbilic vein injection Oronasal intubation nursing Stomach washing, clyster and catheter nursing Ostomy Hand-foot subcutaneous injection Washing, lactation, dressingXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Frequency Modulation And Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Frequency Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Fixed Output DC Regulated Power Supply of ±12 V.
2. Built in Modulating signal Generator of 2 KHz and 4 KHz selectable with a toggle switch with Amplitude to 3V peak to peak approximately.
3. Circuit diagrams for Modulator and Demodulator are printed on the milky white top panel
Resistance Coil, Economy
VHDL/VERILOG Learning Kit
Features
• Based on 64 Macro cell Xilinx CPLD device : XC2C64A • 20 SPDT Slide switches • 16 output LEDs and One 7 segment LED display • 4x4 Matrix keys using Micro switches (4 multiplexed with 4Nos of Slide switch) • One NC/NO switch for giving manual clock • Square wave Oscillator • Onboard USB to JTAG and External JTAG Connector for programming the CPLD • 16 I/O Lines terminated at 20 pin connecter. • External 5 volt 2Amp power supply • Compatible with Xilinx ISE Design Suite Web Pack Software. • USB Cable • Onboard USB to JTAG is Compatible only with Vi JTAG 5.0 Software.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Amplitude Shift Keying Modulation And Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Amplitude shift keying Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Fixed Output DC Regulated Power Supply of ±12 V, +5 V.
2. 100KHz with 5 Vpp amplitude (Approx.) for carrier frequency.
3. In built square wave data generator.
4. Circuit diagrams for Modulator and Demodulator are printed on the milky white top panel.
Thermocouple Calibration Test Rig
The Unit helps in calibrating given thermocouple for the range 0°C to 100°C. While calibrating, thermocouple is once dipped in ice for 0Q C and then in boiling water for 100°C. This is done till the thermocouple shows the actual temperature of ice (0° C) and boiling wafer (100°C) and a linear calibration is set. A mV meter is provided to know the corresponding voltage.
SPECIFICATIONS:
1.A digital mV Meter and a digital temperature indicator with 2 different type of thermocouples. 2.A water container with heater of 1 KW. 3.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Table surface area – 2 m X 1 m X 0.5 m height. 2.220V, 50hz. Stabilize Electric Power Supply. 3.Ice cubes – 0.5Kg. Approx.
Physical Optics Kit
Description
Consists of: 1. Eight Plano-convex lens fl 500 mm, 1 Plano convex lens of fl 150 mm. 2. Twelve lens holders. 3. Four plates of different apertures, 32, 22, 11 and 5.5 mm diameter resp. 4.Three plates with small holes in circles of 29, 22, 10 mm diameter 5. One plate with circular aperture of 5.5 mm diameter 6. Four multi-aperture plates. 7. Four stop plates. 8. Two slide holders. 9. Six translucent screens. 10. Ten white cards. 11. Four Eye-pieces. 12. Fifteen each Red, Green and Blue filters. 13. Forty Black cards with holes. 14. Forty razor blades. 15. 120 Rubber bands. 16. One piece black chiffon for diffraction effectsXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Botany
Algae Fungki, Set of 20 slides
Angiospermic Families, Set of 15 slides
Bacteria, Set of 20 slides
Bacteria, Algae & Fungi, Set of 30 slides
Botany, Set of 30 slides
Bryo & Pteridophyta, Set of 20 slides
Cell Structure, Set of 20 slides
Dispersal of Seeds, Set of 20 slides Fern, Set of 10 slides
Fruits, Set of 20 slides
Germination of Seeds, Set of 20 slides
Higher Plants, Set of 20 slides
Inflorescence, Set of 20 slides
Insectivorous & Parasitic Plants, Set of 20 slides
Blood Bank Rrefrigerator
Features
Temp Range/Precision : 4 ±1°C, 0.1 °C Control System : Microprocessor control Display Alarm : Large screen LED display/ Audio and visual alarm for Height or low temperature; System failure; Door ajar; Power failure Refrigeration Type : Forced air refrigeration system Door : Three-ply transparent glass door with lock, Heating film preventing frosting, Stealing joint strip with magnetic force Casters : 4 casters Power Supply : 110/220V±10%, 50/60Hz Capacity : 120L Refrigerant : R134a, CFC-Free Material Internal : Stainless steel Material External : Cold-rolled steel with anti-bacteria powder coating Drawers/Shelves : Shelves Consumption : 160W External Size(L*W*H) : 520*600*1050mm Standard Accessory : Temperature printer, 2 shelves, 6 baskets, fluorescent lightSpecifications
Temperature- 2°C to 4°C Temperature Accuracy- + / - 1°C Temperature Controller- Digital P.I.D Controller Display- LCD / LED Display Alarm- Audio visual alarm for high and low temperature. Power Failure Alarm- Yes Refrigerant- Non-CFC Refrigerant Defrost type- Automatic Air Circulation- Forced air circulation External Construction- Stainless Steel 304 grades / MS Power Coated Interior Construction -Stainless steel 304 Insulation- CFC free high density polyurethane foam insulation Shelves- Adjustable and made of quality steel wire Illumination- Fluorescent Lamp Safety Device- High and low temperature protection Power Supply - 220 Volts
Water Turbine with Dynamo
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
PLC-SIE2 with Demo Panel Training Kit
This trainer consists of PLC, Demonstration Panel & Programming Software.
PLC Specification
• Make : SIEMENS • Model : CPU1212C • Digital Inputs : 8 Nos • Digital Outputs : 6 Nos • Program Memory : 24KB • Data Memory : 10KB • PLC to PC interface : PROFINET • PWM & HSC channels provided • Windows based programming software providedPanel Specification
• SPDT switches provided for Digital inputs • LEDs provided with fuse protection for Digital outputs • Inbuilt 24V DC power supply provided • Connectors provided for external interface applications
Light Box and Optical Set
Description
A Robust light box in matt black finish with a 12 V 24 W axial filament lamp with flexible leads. One end of the box takes a cylindrical convex lens in an adjustable sliding mount to enable production of convergent, parallel or divergent beams. Complete with accessories which consist of: 5 Plastic blocks, one rectangular, One semicircular, One equilateral prism 60° x 60° x 60°, One right angle prism 90° x 60° x 30° and one right angle prism 90° x 45° x 45°. 3 Cylindrical acrylic lenses: one double convex, one double concave, both having the same radius of curvature and one thick convex lens. 3 Mirrors, one plane glass, one curved parabolic and one curved semi-circular. 2 Slit plates, one with three narrow and one narrow slits, the other with four narrow and one wide slits 1 Set of eight colour filters, Red, Green, Blue, Cyan, Violet, Yellow, Orange and Magenta. 1 Set of coloured cards, Red, Green, Blue, Violet, Orange, Cyan, Yellow and Pink. Complete with one spare lamp, in box.
