XTEMOS ELEMENT
AJAX PRODUCTS TABS
Optical Bench, Junior
Description
On wooden base, with 1.5 meter scale, with six sliding bases. Each siding base is with an index mark, a brass pillar and locking screw, with following accessories: 1. One lamp house with 230 V lamp. 2. One object screen, metal, white. 3. One lens holder for 38 mm diameter Lenses. 4. One receiving screen, metal, white, with slot for squared paper on reverse. 5. One object needle, mounted in brass rod. 6. One plane mirror in metal frame. Each of these accessories is mounted on a 6 mm brass rod which fits into the pillars and is adjustable for height.
MCS Family Microcontroller Trainer
Specification
• 89C51 Microcontroller operating at 12Mhz • 64KB on-chip internal Flash EEPROM program memory • 1KB on-chip data RAM • 64KB External Data RAM • 32KB EPROM for monitor program • 32KB RAM for Program/Data memory • 32KB RAM for data memory • 1KB On-Chip Data RAM • Battery backup for RAM • Onboard 16 x 2 Alphanumeric LCD Interface • Onboard IBM PC Keyboard Interface • RS232/RS485 compatible serial interface terminated at 9 pin 'D' male connector • One RS232 Cable • Onchip Programmable Counter Array (PCA) PCA Contains five 16 bit PWM/capture/compare output • 48 TTL I/O lines using 8255 terminated in two 26 Pin FRC Connectors • All CPU address, data, and control signals are terminated in a 50 pin FRC Connector (VXT Bus) for connecting the • VBMB series of Experiment boards. • All connections of the Microcontroller are terminated in a separate connector for expansion • Built-in Line assembler & Disassembler • Windows based In System Programming Software for Flash Memory programming
Submercible Pump Test Rig
DESCRIPTION:
The Set-up is designed to study the performance of Submersible Pump. The Set-up consists of a Submersible Pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop oil circulation. Pressure and Vacuum Gauges are connected on delivery and suction side of pump for the purpose of measurement. The flow rate of water is measured using measuring tank and stop watch provided.EXPERIMENT:
1. To determine overall efficiency and pump efficiency of the Submersible Pump 2. To plot Head vs. Discharge, Pump efficiency vs. Discharge.FEATURES:
1.Closed loop water circulation 2.Compact & stand alone set-up 3.MS Excel sample calculation program on demand 4. Stainless Steel tanks and wetted parts 5. Superb painted structure 6.Simple to Operate & MaintainUTILITIES REQUIRED:
1.Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC), 5 A, three pin socket with switch for pump. 2.Water Supply: Tap water connection ½ “ BSP, Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
1.Product : Submersible Pump Test Rig 2.Pump & Drive : Submersible Pump, Capacity 1 HP 3.Supply Tank : Capacity 90 Ltrs. MOC SS 4.Measuring Tank : Capacity 60 Ltrs. MOC SS fitted with Piezometer Tube & Scale 5.Piping : GI / PVC 6.Stop Watch : Electronic 7.Control Panel : With required electrical instrumentation The whole Set-up is well designed and arranged in a good quality painted structureXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Refrigerant Gas Leak Detector
Analog PID Controller
The analog PID controller is a special purpose analog controller with operational amplifiers The controller permits a detailed analysis of the application of proportional, integral and derivative control to the improvement of their performance. The controller may be used at high speed for oscilloscope observation or at a low speed for meter observation.
FEATURES:
• Two analog meters (centre zero meters) to display the set variable and process variable. • In built regulated power supply. • Provision to vary and measure the setpoint (0-5)V • Provision to vary the proportional gain, Integral time and derivative gain. • Provision to give either (4-20)mA or (0-5)V externally as a process variable. • Provision to select the controller output as (4-20)mA or (0-5)V internally. • All the components are mounted in an attractive cabinet. • Interface with any realtime process (Level, Flow, Temperature, Pressure, DC motor speed control etc.,)
Tuning Fork Activator
Mechanical Training Model
Description
Highly useful for demonstrating the most fundamental and frequently used mechanism. Very useful for engineering students. All the components are made of high degree of precision. These modules are assembled on transparent perspex sheets to facilitate teaching. Easy to assemble or disassemble.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
HVDC Transmission Line Simulator
The HVDC Transmission due to its advantages, like long distance transmission, interconnect different power systems (like 50Hz and 60Hz), more energy transmits than AC, less losses, make it essential for the students to study & understand the operation of HVDC. Vi Micro have introduced a trainer for this purpose “HVDC Transmission Line Simulator”
HVDC Transmission Line System consists of
• Generating Station Module • Rectifier Station Module (SCR or IGBT Based) • Simulated HVDC Transmission Line Module • Inverter Station Module • Loading ModuleGenerating Station Module
• It consists of a 3Φ, 415V Variable AC source, 1.5 KVA step up transformer, a Multifunction Meter (To measure various electrical parameters of • Generating side or sending end) & a Miniature Circuit Breaker. • Earth Fault Relay is provided for protection against Earth Fault. • The module is covered with metallic enclosure and sticker represents the prime operation of the module. Safety power plug-sockets are provided.Rectifier Station
• Two no’s of fully controlled SCR based bridge rectifiers provided to convert 3Φ AC to DC for HVDC transmission. • Two 6 Pulse SCR bridges connected in series • Can be configured as 12 Pulse Rectifier • A 3Φ, 1.5KVA transformer with (Y) primary and dual (Δ, Y) secondary are provided to reduce harmonics • The module is covered with metallic enclosure and sticker represents the prime operation of the module.
Histology Set II
Set of 24 slides consisting of
| Adrenal gland | Areolar tissue |
| Cereburm | Colon |
| Compact bone, LS | Heart, entire LS |
| Human plantar skin | Hyaline cartilage |
| Kidney, LS | Liver, injected |
| Lung, LS triple stain | Lymph node |
| Olfactory epithelium | Oviduct |
| Penis | Peripheral nerve |
| Pituitary, V.LS | Sperm Smear |
| Striated muscle, TS | Thyroid gland |
| Tooth | Trachea |
| Ureterv | White Fibre-Cartilage |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Vacuum Delivery Model
Description
The model basing on the mechanism of normal labor shows the cardinal movements of engagement. Descent-flection-internal rotation of the head-extension-retitution-external rotation of the head-internal rotation of the shoulders at accouchement. Suitable for teaching the mechanism of normal labor in medical colleges and nursing schools.
Meiotic Cell Division
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Wave Machine, Metal
4 Stroke Petrol Engine Sectional Working Model
Water Cooler Trainer
The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, cooling cycle comprises of a hermetically sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell. The stainless steel water tank is provided with insulation on air Sides and a door are provided at the top. Cold water can be taken out from a top provided and inlet water supply is controlled by a bail-operated top. Various measurements provided enable students to determine the theoretical and actual COP, power consumption, actual cooling capacity refrigerant flow and compressor volumetric efficiency of compressor.
SPECIFICATIONS:
Cooling Cycle a) Compressor Hermetically sealed type, having the capacity of 1/3 ton of refrigeration using R-12 refrigerant. b) Finned tube type air colled condenser with forced air flow. c) Filter cum drier for refrigerant. d) Capacity expansion device. e) Evaporator coil embraced on stainless steel water tank, Provided with glass wool Insulation. 2.Water drain tap and float operated inlet water tap are provided for water tank with insulated lift door at top. 3.Measurement a) Pressure gauges for evaporating and condensing pressure. b) Thermometers to measure refrigerant temperatures at inlet and out let of condenser and evaporator. c) Dial type thermometer for water temperature. d) Rotameter to measure liquid refrigerant flow. e) Energymeter to measure compressor Input. 4.Safely & Controls – a) Thermostat to put off compressor at set water temperature. b) Pressostat to put off compressor if high or low pressure Goes out of set limit. c) Over load protector for compressor, A technical manual will be supplied along – with the unit. Also, the unit is provided with an attractive and anti corrosion powder costing.SERVICES REQUIRED:
1.Floor space of 1.5 m. X 1.5 m. 2.Water supply of 5 lit/min, 3.230 V, 15A AC stabilized supply with earthing connection
Corcyra Cage
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Ticker Tape Timer
For the measurement of velocity and acceleration, using timing marks made on a moving paper tape by a vibrating striker.
Designed to operate on a 12V A.C. supply and uses the mains frequency as its timing standard.
The unit is housed in a moulded case including mounting flanges.
The top of the case caries a tape guide which incorporates a carbon paper disc support and an adjustable anvil for the striker point.
All moving parts are fully enclosed and a pair of 4mm sockets are provided on the side of the case for connection of the electrical supply.
Supplied with a roll of self marking paper tape.
Paper tape : 100m of paper tape, 9.5mm wide.
Carbon Paper Discs : 40mm diameter, with 3mm hole, cut from long life plastic film type carbon paper.
LPC 2148 Evaluation Board
ON Chip Features
• CPU - LPC2148. • Core - 16/32 Bit ARM7TDMI-S. • Speed - Max 60 MHZ. • Flash - 512KB. • RAM (on-chip) - 40KB. • 46 x General Purpose I/O Pins. • USB2.0 Full speed Compliant Device. • One 10bit ADC with 14 Analog inputs. • One 10bit D/A Converter. • Two 32bit Timers/ External Event Counters. • Low Power Real Time Clock. • Six PWM, Watchdog. • Two UARTS (16c550). • Two Fast I2C (400Kb/s) Module.ON Board Features
• Eight Digital Output - LED Interface. • Two Digital Input. • 16 x 2 Character LCD Interface. • 7 Segment Display via I2C Interface. • 10 Base T Ethernet Connectivity. • SD Card Interface Support. • Audio Interface. • Jtag connector is provided for Debugger. • USB to serial interface provided.
