XTEMOS ELEMENT
AJAX PRODUCTS TABS
COPLIN JAR FOR 5 SLIDES
PRODUCT DESCRIPTION:
This popular staining jar has heavy glass walls and a broad base for increased stability. It holds five single 3" x 1" (75 mm x 25 mm) slides vertically, or 10 slides back to back, and requires low reagent volume (approximately 65 mL). Manufactured from soda-lime glass. Approximate inside dimensions: 26 mm L x 26 mm W x 90 mm D.
Ray box Multi Slit
DC Network Analyzer
Specification
• Here we provide the bi-polar Transmission Line. • Simulated long, medium & short distribution lines selectable by patching in various length of DC Transmission line • Two no of bi-polar DC generator sources with ON/OFF control and voltage regulator potentiometer. - Two wire or Three wire Transmission Line operated in +12V DC - Each DC generator are independently control by potentiometer. • 2 digital voltmeters and ammeters provided in the input side and 2 digital volt meters and ammeters are provided in the output side • of transmission line to read the input & output parameters of transmission line. • One no of microcontroller based measuring system provide to read the input and output parameters. • 4 nos of digital ammeters provided to read the load current • 4 nos of resistive load and 4 nos of lamp loads are provided to load the transmission line.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Digital Colony Counter
Description
Fitted with automatic 3 Digits LED Digital Display. Counting plate with illuminated standard wolf hugel ruling ensures clearly differentiated and sharply defined colonies. Each touch of making pencil in the petri dish increment the colony count by '1' and the glowing LED Display depicts the total colony count. Provided with a manual reset of digital display, ON/OFF Switch, counting plate, 100 mm. dia lens, cord and plug. To work on 220V A.C.
Car Air Conditioning Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
Car Chassis Rear Wheel Drive Actual Cut Section Motorised
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE:
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM: It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Spartan 6 Trainer Kit
Features
• 16 Nos. of digital input using slide switches with LED indication • 16 Nos. of digital output using discrete LEDs • 16× 2 LCD is provided for display the text message. • One Reset Switch • One switch for giving manual clock • FPGA configuration through - On board Xilinx USB to JTAG Programmer with isolation to configure FPGA - On board Flash Prom XCF04S (Programmable through USB to JTAG programmer) • Total 186 I/O Pins: 100 Pins used for integrating peripheral like LED, Switches etc., balance pins are available to user • In 3nos of 20 pin header. • 1 No of 26 pin header to interface VLIM cards like Traffic Light Controller / On-board TLC (factory settable). • On board programmable PLL oscillator from1 MHz to 100MHz using jumpers • 4Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor drive provided on board (Motor Optional) • 4x4 matrix key provided • On board I2 C RTC Interface • On board Temperature Sensor Interface • SPI Based Analog to Digital Converter
Typical Flower
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Draining Basket
We are known as the chief Exporter and Trader of the latest Draining Basket in India.
As the name suggests, the Draining Basket are available with wide net like structures on all sides.
These structures are proved really useful for draining different laboratory apparatus after washing them.
Made of polypropylene, Our Draining Basket can be repeatedly autoclaved.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Draining Basket 400 x 400 x 100 mm | 6 |
Insect Display Showcase
Description
For display of insects in corridors, laboratory etc. MDF frame with MDf sheet bottom and glass top is nicely polished. Bottom lined with 8mm thick EVA sheet. Raised wall with holes for insecticide bottom to make box airtight & pest-proof. Fitted with clips, lool, handle, hanging hooks on ends and fluorescent tube inside. Size 90x60x11cm.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Pteridophyta
| Azolla Sporocarp VS | Adiantum Rhizome TS |
| Adiantum Root TS | Adiantum Sorus VS |
| Equisetum Prothallus WM | Equisetum Root TS |
| Equisetum Rhizome TS | Equisetum Stem TS |
| Equisetum Cone TS | Equisetum Cone LS |
| Fern Rhizome TS | Fern (Pteris) Prothallus Young |
| Fern Prothallus with Antheridia | Fern Prothallus with Archegonia |
| Fern Prothallus with Sporophyte | Fern Leaf with Sori TS |
| Fern Sori WM | Fern Prothallus TS |
| Fern Rachis TS | Fern Root TS |
| Lycopodium Root TS Lycopodium Stem TS | Lycopodium Apex LS |
| Lycopodium Cone LS | Lycopodium Cernum Stem TS |
| Lycopodium Wightiatum Stem TS | Lycopodium Phlegmaria Stem TS |
| Marsilea Leaf TS | Marsilea Root TS |
| Marsilea Rhizome TS | Marsilea Petiole TS |
| Marsilea Sporocarp LS | Marsilea Sporocarp TS |
| Selagineela Root TS | Selaginella Rhizophore TS |
| Selaginella Leaf TS | Selaginella Stem TS |
| Selagineela Strobilus WM | Selaginella Strobillus LS |
| Selaginella Microsporangia WM | Selaginella Mega and Microsporangia WM, TS |
Curved Member Apparatus
Apparatus consists of a steel bar which is used to make the different curved members Viz. circle, semicircle with straight arm, a quadrant of a circle and quadrant of a circle with straight arm. The bottom ends of the members are fixed to the base. Under the application of load at free end, its horizontal and vertical deflection can be measured with the help of dial gauges. A dial gauge with 25mm travel (with a magnetic base) is supplied with the apparatus. Apparatus to be supplied should be complete with a supporting stand and a set of weights.
Experimental Capabilities: Apparatus is supplied complete with a supporting stand and a set of weights.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
4 Stroke 6 Cylinder Petrol Engine V-6
4 Stroke 6 Cylinder Petrol Engine (V-6) Motor Driven Actual Cut Section Working Model
The engine be sectioned to show the internal constructional details.The working of individual part and accessories like Valves,Pistons,pumps,Crank and Camshaft,etc.will be demonstrated.It is provided with Flyweel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes.The actual cut section engine willbe supplied with key card & very interesting literature regarding working.
