XTEMOS ELEMENT
AJAX PRODUCTS TABS
Masses, Slotted
Solid brass, Accurate machined masses placed on a plastic and metal rack with handle.
Set of 8: 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, and 1x500 gm, Total 1100 gm.
Set of 10: 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1100 gm.
Set of 12: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 1x100 gm, 2x200 gm, 1x500 gm, Total 1110 gm.
Set of 14: 1x1 gm, 2x2 gm, 1x5 gm, 1x10 gm, 2x20 gm, 1x50 gm, 5x100 gm, 1x500 gm, Total 1110 gm.
PLC Based Variable Frequency Drive Module
Specification
• PLC provided to control the variable frequency drive • PLC having Analog Input and Analog Output channels in range of (0-10)V DC • PLC having the digital I/Os in range of 24V DC • Communication cable (RS 232/Ethernet) will be provided communicate the PLC to PC • VF drive provided it operates at 230V AC supply • It provides the 3Φ AC output voltage • 3Φ AC Induction motor will provides. It operates at 415 AC, 3Φ, Frequency as 50Hz and rated 1500 rpm speed • PLC and VF drive mounted on the attractive printed panel trainer kit. • Variable pot meter, push button and connectors provided for experiment purpose
Human Female Pelvis
Wheel And Axle, Simple Form
Wooden double wheeled pulley
Consisting of a wooden double wheel with flat-bottomed grooves, 150 and 50 mm diameter respectively.
The wheel is pivoted on a spindle 10 mm diameter which projects for a distance of 100 mm so that the apparatus may be clamped to a normal retort stand.
The apparatus is supplied complete with two hooks and 6 meters of cord but without masses and stand.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Health
Cortex M4 Development Board
Cortex M4 is an ideal replacement solution for the traditional Microcontroller & DSP Processors. Vi-S32 based on ST Microelectronics cortex M4 processor offers many features for Embedded Real Time world. The full range of hardware features on the board is provided to help you to evaluate and develop many applications. STM32 Embedded target enables systems and software Engineers to quickly deploy their application models in Matlab& Simulink to Cortex M4 ARM.
Specification
• STM32F407VGT6 microcontroller high performance 32bit ARM Cortex M4. • Operating upto 168MHz • 196Kbytes of SRAM • 2.4 MSPS Analog to Digital Converter • Two Nos. of Potentiometer interface for ADC input. • Two Nos. of DAC with simultaneous conversion • 1MB On-Chip Flash. • 4 Nos. of User LEDs, Relay Interface. • 8 way dipswitch for user input • I2C Based 2 digit 7 Segment display interface. • 4 keys keypad, Stepper Motor driver interface. • USB OTG FS with micro AB connector interface. • RTC with battery backup • I2C EEPROM device interface • SPI based temperature sensor interface • 1 Gbyte Micro SD Card interface • RS232 UART interface at a pin D connector/USB connector • CAN 2.0 lines are terminated at 9 pin D female connector • 3.2inch 240 x 320 TFT color LCD with Touch Screen • 10/100Mbps Ethernet interface • Extension header for I2C, SPI & CAN • Camera Interface
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Electric Motor St. Louis
Description
The motor consists of a two pole armature mounted between the ends of two bar magnets. The armature has a two section commutator and a pair of slip-rings on its shaft and is so constructed that the wire cannot slip off the iron core. The upper bearing and brushes for the commutator are mounted on a strong upright. Separate brushes are provided for the commutator and for slip rings and each are connected to a terminal. The magnets are held in position by thumb screws.
Latent Heat of Steam Apparatus
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Main Voltage Coils, For Demountable Transformer
VM CRUCIBLE with Lid 25mm Dia x 38mm ht.
Allihn Condensers (Bulb Condenser)
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Hall Effect Transducer
Voltage Measurement:
• One Voltage Signal conditioner is provided to interface with ADC • Output Voltage Range: (0-5V) • One Analog meter is provided to indicate the input voltage.Current Measurement:
• One Current Signal conditioner is provided to interface with ADC • Output Voltage Range: (0-5V) • One Analog meter is provided to indicate the input current. • Built-in Power Supply • One Auto Transformer is provided to vary the input voltage and current • 3½ Digit digital indicator
Plaque Building Anatomical Models
Solar Demonstration Kit
Set of Masses, Brass
Set comprises masses of brass with slots, brass hangers with hook. Fine finish, masses removable and replaceable on hanger.
Set of 9 weights, one hanger each of 10 gm. Total weight 100 gm.
Set of 9 weights, one hanger each of 25 gm. Total weight 250gm.
Set of 4 weights, one hanger each of 50 gm. Total weight 250gm.
Set of 9 weights, one hanger each of 100gm. Total weight 1000gm.
Set of one hanger 20 gm. three weights 20 gm. Total weight 100gm.
Set of one hanger 50 gm, nine weights 20 gm. One weight 10 gm. and two weights 5 gm. Total 250 gm.
Spare slotted weights and Hangers 5gm., 10gm., 20gm., 50gm., and 100 gm. are also available.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Hydraulic Ram Test Setup
DESCRIPTION:
The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement.EXPERIMENT:
Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAMFEATURES:
Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & MaintainUTILITIES REQUIRED:
Electric Supply: – Provide 230 +/- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional)TECHNICAL SPECIFICATIONS:
Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.) Ø Air Vessel : Suitable Capacity MOC SS Ø Delivery Line : For RAM, Dia 50 mm Length 6 m. Ø Pump : Capacity 1 HP, Crompton / Sharp / Hero make Ø Supply Tank : Capacity 150 Ltrs. Ø Overhead Tank : Capacity 100 Ltrs. Ø Measuring Tank : Suitable Capacity one each for useful and waste MOC SS fitted (2 Nos.) with Piezometer Tube & Scale Ø Piping : GI / PVC Ø Stop Watch : Electronic Ø Pressure Gauge : Bourdon Type Ø Control Panel : Comprises of Standard make On/Off Switch, Mains Indicator etc. Ø Tanks will be made of Stainless Steel. Ø The whole Set-up is well designed and arranged in a good quality painted structure.
Three Phase Cyclo Converter
This module is designed for three phase half wave-step down cycloconverter. It consists of 18 Synchronized firing pulses, 18 SCRs, Relevant power supply and circuitry for frequency divisions.
Specification
• Eightin nos. SCR with RC snubber protection is provided for 3phase • cycloconverter power circuit (each phase consist of 6 SCRs) Rated at 1200V@25Amps. • Three nos. center tapped inductor (0%.50%, 100%) is provided for power circuit. • Eightin nos. Isolated gate pulses for SCR power circuit. • One potentiometer is provided to vary the frequency. • One potentiometer is provided to vary the output voltage. • MCB protection. • Housed in sleek screen printer cabinet. • Provision for V/F control Power Supply. • Input 440V ± 10%, 50HZ three phase AC supply. • ± 15V DC, 9V, 9V, 9V AC (3phase) for the firing circuits. • 24-0-24V 3phase input for power circuit.
SCR VI Characteristics Study Trainer
Specification
• Basic VI characteristics study trainer. • Consists of one no. TYN612 SCR with heat sink. • LM723 based 20V DC power supply for gate voltage. • One no. potentiometer used to vary the gate current • 0- 30V DC variable power supply for anode, cathode voltage variation. • One no. potentiometer used to vary the Vak. • One no. high voltage fixed load resistor. • One no. toggle switch to ON/OFF gate voltage. • Two nos. DC ammeter, voltmeter/multimeter provided to measure Ig&Vak, Ia. • 230V AC input. Power ON/OFF switch. • All components are mounted on a screen printed PCB fixed on a nice wooden cabinets.
Fiber Optics Communication Set
Objective:
To construct an optical transmitter and transmission of signal through Fiber Optics Cable. To construct an Optical Receiver and study the Attenuation of Signal when transmitted from Transmitter to Receiver end. Analog and Digital link can also be studied as this unit is complete with Sine and Square Waves. Bending losses can also be studied.
Features:
Instrument comprises of Microphone Preamplifier stages consists of MIC (Microphone), Preamplifier and Amplifier (Voice is converted to electrical signal and then amplified) and fed to LED (Transmitter) and then through fibre cable, signal is sent to Photodetector (Transistor) and again amplifier and output is sent to Speaker Unit. Power Supply of +6 VDC is used in Amplifier ckt. 2 No. Fiber Optics cables are provided (one of them is 50 cm long and the other is 100 cm long). One more fiber cable of 50mm length having connector at one end is also provided. Connectors a both end of fiber cable are provided for insertion in sockets provided on the front panel. Bending losses can also be studied in long wire.
Standard: MIC with 2 meter long lead and a Speaker 4, 4 ohm are mounted in a vertical box.
Accuracy: with 1 meter long connecting leads. 2 No. Fiber optic cable having length of 50 cm and 100 cm are provided.
Optional : Digital multimeter (3 1/2 Digit, Big size Display) This model also include Digital Multimeter and wooden frame for measurement of Numerical aperture i.e. complete in all respect including facility for measurement of numerical aperture.
DC Servo Motor Controller
This trainer designed for versatile Applications / Experiments mentioned below. It consists of(i) a PWM Chopper Drive using MOSFET (ii) DC Servo Motor (iii) Speed Sensor (v) PI Loop for speed. This trainer system is a compact & advanced version for class room experiment setup for the students to operate and study a practical speed measurement using optical sensor and speed control system.
