XTEMOS ELEMENT
AJAX PRODUCTS TABS
Dicot Plant Stem
three-phase-flying-capacitor-5-level-inverter-power-module
Specification
• Power circuit consists of 24Nos, 1200V, 20A IGBT with proper heat sink and snubber circuit. • 18 Nos of flying capacitor provided • 6 Nos, Power Diode @ 500v is provided for power circuit • 24 Noshigh speedopto-isolator provided for IGBT PWM inverter. • 24 Nos IGBT gate driver IC provided for IGBT gate driving • 22 nos isolated +15v dc @ 0.5A capacity provided for control circuit • One no of 3phase diode bridge rectifier@1200V, 20A with capacitor provided for input AC-DC conversion • 3 no of Hall Effect current sensor provided for O/P current measurement & protection circuit • 1 no Hall Effect current sensor provided for DC current measurement • Two no FRC connector provided for IGBT PWM input & ADC interface • MCB protection for input power ON/OFF & protection • One no of restart switch and LED provided for protection circuit indication & reset the unit • One Number of analog DC voltmeter provided for DC voltage measurement. • One number of power ON/OFF switch provided. • 3 Phase outputs & 3 Phase inputs are terminated in the front panel. • Test points provided for PWM input and current sensors output
Annelida
Earthworm Buccal Region TS
Earthworm Pharynx Region TS
Earthworm Spermathica Region TS
Earthworm Oesophagus Region TS
Earthworm Seminal Vesicle Region TS
Earthworm Prostate Gland Region TS
Earthworm Testis Region TS
Earthworm Intestinal Region TS
Earthworm Gizard Region TS
Earthworm Clitellum Region TS
Earthworm Typhlosolar Region TS
Earthworm Anterior Region Sag. Sec.
Earthworm Ovary WM
Earthworm Setae WM
Earthworm Septal Nephridium WM
Nereis Parapodium WM
Heteronereis Parapodium WM
Nereis Body TS
Leech Crop Region TS
Leech Stomach Region TS
Leech Intestinal Region TS
Leech post. Sucker TS
Leech Ant. Sucker TS
Dynamic Trolley, Wooden
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Lens, Double Convex, Spherical
Description
Clear glass, ground edges
| Focal length | Power | Add To Enquiry |
|---|---|---|
| 25 mm | 100 mm | +10D |
| 25 mm | 150 mm | +6.6D |
| 38 mm | 50 mm | +20D |
| 38 mm | 100 mm | +10D |
| 38 mm | 150 mm | +6.6D |
| 38 mm | 200 mm | +5D |
| 38 mm | 250 mm | +4D |
| 38 mm | 300 mm | +3.3D |
| 38 mm | 500 mm | +2D |
| 38 mm | 1000 mm | +1D |
| 50 mm | 50 mm | +20D |
| 50 mm | 100 mm | +10D |
| 50 mm | 150 mm | +6.6D |
| 50 mm | 200 mm | +5D |
| 50 mm | 250 mm | +4D |
| 50 mm | 300 mm | +3.3D |
| 50 mm | 500 mm | +2D |
| 50 mm | 1000 mm | +1D |
| 60 mm | 100 mm | +10D |
| 60 mm | 200 mm | +5D |
| 60 mm | 300 mm | +3.3D |
Steam Engine Model
Action of Cams
Surface Tension Balance, Searle’s
A horizontal frame is mounted on a rod fitted to a base & carries a steel wire stretched across it, the tension of which can be adjusted by a tightening screw.
A light metal pointer with a counterpoise is attached to the centre of the wire clamp.
A pan is hung from a notch in the pointer and has a hook at its underside from which can be suspended a light weight rectangular frame or a metal clip to hold a micro slide edge.
The tip of the pointer moves over a graduated scale. With rectangular wire frame, slide clip, six micro slides & 3 meters of spare wire.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Multiple Input/Output Process Trainer
Panel Features
• Power ON/OFF switch • Heater selection switch • Heater and pump indicators • High current fuse carrier for • Heater protection • Provision to run the stirrer • Digital panel meters • Two numbers of industrial PID Controller • Electrical test points are provided to measure the current signal • Mimic DiagramFeatures
• Two numbers of flow Transmitter (DPT) are provided to sense the flow of the liquid. • Three numbers of temperature transmitter (RTD) are provided at various stages to measure the temperature. • Five numbers of level sensor (RF capacitance) are provided to sense the level of each tank. • Industrial type Conductivity sensor is provided to analyze the conductivity of given Solution. • RTD sensor (or) Thermocouple acts as a temperature sensor. • Digital panel meters are provided to indicate the output of each sensor. • Provision to measure the conductivity. • Two numbers of motorized control valve or pneumatic control valve are provided to control the flow of the pipe line. • A powerful thyristor based power driver is provided to drive the heater power. • An industrial type water heater is used as a heat Source. • Storage tank of 50 litre capacity (SS). • Process tank of 15 litre capacity (SS). • Four numbers of acrylic tank are provided to study the response of four tank systems. • In necessary location Ball valve, globe valve and needle valves are provided. • Two numbers of stirrer are provided in the temperature process and alkaline process. • Three numbers of centrifugal pump (FHP) is used to circulate the water from storage tank. • Six numbers of rotameter are provided in the process inlet to visualize the real flow. • Regulated power supply is mounted in the panel. • All the flow lines are fitted by (SS) pipe fitting. • An over head tank is provided to give constant flow. • All the equipments are mounted in a rugged and mobile type metallic work station.
Clinometer Compass
Description
Clinometer Handle Compass is a reproduction of an antique Clinometer compass. The Handle Compass gets its name from its "handle" shaped sight, which actually serves two purposes With the compass level, an object can be viewed through the peep sights to determine its magnetic heading. The second and most interesting purpose is when tilting the compass on its side and viewing an object through the sights, its angle of elevation or declination can be found. A weighted pendulous arm beneath the compass needle can be read from one of three scales : Angle in degrees beneath the zenith (from straight up), angle in degrees of elevation or declination, and in inches per yard of slope. The compass has a needle lift mechanism to protect the compass jewel and the pendulous arm when being transported.
TMS320C6713 Based DSP Trainer
KEY FEATURES:
• Highest performance floating point Digital signal processor (DSP) • 150 MHz Clock rates • 6.7ns Instruction cycle time • 16 bit external memory interface (EMIF) • 16 bit Host-port interface (HPI) • Two multichannel Audio serial ports (MCASPs) • Two multichannel Buffered serial ports (MCBSPs) • Inter integrated circuit (I2C) ModuleONCHIP MEMORY:
• 4KB L1P Program cache memory • 4KB L1D data cache memory • 256KB L2 unifies cache mapped RAMON BOARD FEATURES:
• 512Kx 8bit FLASH for monitor Program • 4M x 16 bit SDRAM for External Memory. • 8 way DIP switches & LEDs to user interface • LCD interface, I2C RTC • Stepper motor Interface • On board USB and UART for serial communication • PCM3002 Audio codec
Lenses, Set of Six
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Stand For Optical Bench Accessories
Oxygen And Carbon Cycle In Nature
Test Tube Stand of 6 Holes, Wooden
Description
With vertical pins:
Wooden, polished stand with drilled holes, 2 of 25 mm dia. and 4 of 20 mm to accommodate 6 tubes with overall height of 9 cm and length of 20 cm. Vertical pins are provided for quick drying of the test tubes. Also available for 12 tubes, with 2 holes of 25 mm dia and 10 holes of 20 mm dia.Specifications :
Length : (in) 9.4 Width : (in) 3.5Without vertical pins and moulded supports:
Wooden with base and top with single row of 6 holes, clips together quickly and easily with two moulded supports. Height 11cm can accept two tubes of 30 mm and four tubes of 20mm diaSpecifications:
Length: (in)11.8 Width: (in)10.2Without vertical pins:
Wooden test tube stand - 6 holes of 22 mm dia. Test stand measures 9.5" long 2.5" wide base and 4.5" tall (Test tubes not included - shown for demostration )Specifications :
Weight: (lb)0.9 Length: (in)10.0XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
TMS320C6747 Based DSP Trainer
KEY FEATURES:
• TMS320C674x Fixed/Floating-Point VLIW DSP Core Operating upto 300MHz • 64 General-Purpose Registers (32 Bit) • Six ALU (32-/40-Bit) Functional Units • Two Multiply Functional Units • Instruction Packing Reduces Code Size • All Instructions Conditional • Hardware Support for Modulo Loop Operation • On Chip RTCON-CHIP MEMORY:
• Two Level Cache Memory Architecture • 32K-Byte L1P Program RAM/Cache • 32K-Byte L1D Data RAM/Cache • 256K-Byte L2 Unified Mapped RAM/Cache • 128K-Byte RAM Shared MemoryON-BOARD FEATURES:
• Boot mode selection Switch • 1M x 16 Bit x 4 Bank SDRAM. • 10/100M Ethernet Interface • USB1.0 & USB 2.0 Interface. • Embedded JTAG for Emulation. • 8 LED & 8 Switch for user Interface. • Expansion Connector For GPIO & Peripheral Interface. • VSDA Expansion Card for 4 Channels ADC & 4 Channels DAC. • Provision to connect external JTAG Emulator • RS232 Serial Port Interface
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Digital Coating Thickness Meter
Description
Digital Coating Thickness Meter We offer high quality of Digital Coating Thickness Gauge. Statistics (Number of readings, average, Std. deviation, max. ,; min.) are updated with every reading and displayed simultaneously. It helps to decide how many readings are to be taken. Continue taking readings till you start getting reasonably consistent statistics.
Worm Sector Type Steering System
Worm & Sector Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
