XTEMOS ELEMENT
AJAX PRODUCTS TABS
Digital Colorimeter
Description
The basic set-up of the colorimeter is: LED light source: Produces polychromatic light over the entire visible region, 45 Broad spectrum filter: The colorwheel has nine different filters. The filter employed is selected by wavelength. Each filter will produce monochromatic light at a specified peak wavelength with a bandpass of 20 mm. The filters enable the user to perform tests from 400 to 680 nm. Cuvette Holder: It holds the inserted cuvette during testing. It is imperative the cuvette be consistently oriented in the holder. Round cells usually have orientation markings to correctly position the cuvette. Detector: A silicon photo diode is used as the detector. The photo detector current will change as a function of light energy. Display:The current signal from the detector is converted to a numerical value, absorbance and is shown on led display
Fiber Optics Communication Set
Objective:
To construct an optical transmitter and transmission of signal through Fiber Optics Cable. To construct an Optical Receiver and study the Attenuation of Signal when transmitted from Transmitter to Receiver end. Analog and Digital link can also be studied as this unit is complete with Sine and Square Waves. Bending losses can also be studied.
Features:
Instrument comprises of Microphone Preamplifier stages consists of MIC (Microphone), Preamplifier and Amplifier (Voice is converted to electrical signal and then amplified) and fed to LED (Transmitter) and then through fibre cable, signal is sent to Photodetector (Transistor) and again amplifier and output is sent to Speaker Unit. Power Supply of +6 VDC is used in Amplifier ckt. 2 No. Fiber Optics cables are provided (one of them is 50 cm long and the other is 100 cm long). One more fiber cable of 50mm length having connector at one end is also provided. Connectors a both end of fiber cable are provided for insertion in sockets provided on the front panel. Bending losses can also be studied in long wire.
Standard: MIC with 2 meter long lead and a Speaker 4, 4 ohm are mounted in a vertical box.
Accuracy: with 1 meter long connecting leads. 2 No. Fiber optic cable having length of 50 cm and 100 cm are provided.
Optional : Digital multimeter (3 1/2 Digit, Big size Display) This model also include Digital Multimeter and wooden frame for measurement of Numerical aperture i.e. complete in all respect including facility for measurement of numerical aperture.
Stereo Zoom Microscope
Specifications
| Magnification | : | 20x & 40x or 30x and 60x | |
| Eyepiece Lens | : | Wide Field 10x or 15x Paired Eyepiece | |
| Objective | : | 2x and 4x (Turret Type Revolving) | |
| Focusing | : | Vertical movement with rack & pinion, Tension control knob & stroke 50 mm | |
| Inclination | : | 45° | |
| Tube Rotation | : | 360° Rotatable, Removable |
Accessories
Rubber Eye Guard. LED Light Illuminator or Flurescent Ring Illuminator.
Thermocouple, Double
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Pendulum Bobs dia 25mm- Set of 3 (Brass, Copper & Iron)
Hope’s Apparatus
BURETTE STAND
Bar Breaking Apparatus
Description
A heavy cast iron stand slotted to carry a stout iron bar, with ten cast iron breaking bars. Comprising a heavy cast iron frame 340 x 120 x 100 mm with slotted end pillars to carry a stout iron bar. The bar is threaded at one end for a large tensioning nut and has holes at the other end to accommodate the cast iron breaking bars. Supplied complete with ten breaking bars.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Special Human Physiology Charts
Description
Poly art Charts are multi colored, accurate in details, printed on plastic, laminated on both sides, washable, non-tearable and long lasting, with plastic rollers, size 75 x 100 cm.The Lymphatic System
Excretory System – Kidney, L.S. Excretory System – Ureters Excretory System – Urinary bladder Excretory System – Malpighian Corpuscle T.S. Skin Reproductive System Brain External Features L. S. Eye – Eye Muscle L. S. Eye – Tear glands L. S. Eye – Physiological diseases of eye Ear and its parts Skeletal System Endocrine glands Digestive System Circulatory System – Types of blood cells Circulatory System – L. S. in heart & T. S. in blood vessel Circulatory System – Vein valves Circulatory System – Systematic & pulmonary circulation Respiratory System – Larynx Respiratory System – Trachea Respiratory System – Alveolus L. S. in Central Nervous System (CNS) Region in which the nerves impulses transport to central nervous system through the synapse Human Reflection Arch
Utility Tray
We excel in providing high quality Utility Tray to our valuable clients.
Our range of Utility Tray is well appreciated in the market for its high quality and durability.
this Polypropylene Tray can be utilized for wide range of purposes ranging from drying glassware to sterilizing and for storing any laboratory apparatus.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Utility Tray 375 x 350 x 130 mm | 6 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
TDM-PAM Modulation and Demodulation
FEATURES:
• Crystal based clock generator • On-board synchronized sine wave generator (250Hz, 500 Hz,1KHz, 2KHz) • On-board DC voltage for receiver synchronization • Four channel Time Division Multiplexing &Demultiplexing • Three wire, Two wire and single wire transmission system • On-board PLL for clock Recovery • Comparator for receiver channel synchronization • Fourth order butter worth Low pass filterTECHNICAL SPECIFICATION:
• Crystal Frequency : 6.4MHz • SinewaveType : On-board synchronized • SinewaveFrequency : 250KHz, 500Hz, 1KHz, 2KHz • DC Level : 0 to 5V (Variable) • Number of Channel : Four • Multiplexer Type : Switch Based • DemultiplexerType : Switch Based • Channel Synchronization : Comparator • Clock Recovery : Phase Locked Loop • Filter Type : Butter worth, Low Pass Filter • Filter Cut off Frequency : 3.4 KHz
Slip Creep Measurement Apparatus
The apparatus consists of a variable speed D.C. Motor, Driving pulley and Driven pulley of equal diameter. The pulleys are mounted on input shaft (Motor shaft) and output shaft. The driven pulley can slide on the base with bearing block to change initial tension in belt. Brake drum is mounted on output shaft helps to measure power output. The motor speed is varied by dimmerstat. A two channel RPM Indicator is provided to measure speeds of driven and driving pullies respectively.
Specifications:
1.D.C. Motor – 1 HP, 1500 RPM, variable speed. 2.Driving & Driven puilies of equal diameters. 3.Brake drum along with spring balance. 4.Fiat Belt of fixed length of following materials – (i)Fabric Belt (ii)Canvas Belt. (iii)Rubber Belt. 5.Belt tightening arrangement. 6.Speed Controller unit. 7.Two Channel digital RPM Indicator. 8.Stroboscope.Experimentation –
1. To measure co-efficient of friction between pulley material and different belt materials. 2. To measure power transmitted with varied belt tensions and plotting graph of (T1 – T2).Tension Characteristics. 3. To measure percentage slip at fixed belt tension by varying load on brake drum and plot graph of (T1-T2) Vs.percentage slip.i.e. Slip Characteristics. Finding a creep zone from graph. 4. To measure belt slip speed and observe the limiting value float at constant speed when the slip just starts.Service Required:
1.230 V.A.C. stabilized power supply 2.Space -. 1.5m x 1.5 m.
Phase Shift Keying Modulation and Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Phase Shift Keying Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Fixed Output DC Regulated Power Supplies of ±12 V and ±5 V.
2. Built in Carrier wave Generator (Sine Wave) of 5 Vpp, 22 KHz ± 5% Frequency range with output on sockets.
3. Built in Data Generator using IC 7490 with four modulating signal outputs on sockets.
4. IC TL084 & IC 7486 are using for PSK demodulator.
5. Circuit diagram is printed on the milky white top panel and important connections are brought out on the sockets.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Neuron
4 Stroke 4/3 Cylinder Petrol Engine
4 Stroke 4 Cylinder Diesel Engine – Motor Driven Actual Cut Section Working Model With Valve Timing Attachment
The engine be sectioned to show the internal constructional details.The working of individual part and accessories like Valves,Pistons,pumps,Crank and Camshaft,etc.will be demonstrated.It is provided with Flyweel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes.The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Galvano Meter
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Junior Medical Microscope
Specification
Two achromatic par focal objectives 10x &40x (SL). Wide fiels eyepiece 10x and Huygenian eyepiece 15x. Fine focusing by screw lever mechanism having a graduated knob with sensitivity 0.002mm. Fixed square stage 120x120mm with newly developed spring stage clips. Special silicon rubber feet prevents scratched and provide positive grip for life long. Rack and pinion coarse adjustment. Double lens Abbe condenser , N.A 1.25 with iris diaphragm can be moved up and down by knob on lower left side. Plano concave mirror illuminator. Magnification 100x to 600x. LED microscope lamp.
L Shaped Spreader
We are a prominent Exporter & Trader of L Shaped Spreader.
The L Shaped Spreader is sterile & smooth and enables even spreading of liquid samples across the surface of a jar plate without grouping & cutting the medium.
Avail the L Shaped Spreader from us at nominal market prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| L Shaped Spreader | 100 | |
| Micro Pestle (for 0.5 and 1.5 ml MCT) | 12 | |
| Micro Pestle (for 1.5 ml MCT) | 12 |
Dissecting Microscope with Bull Lens
Specifications
Heavy stable round base, Focusing done by Rack & Pinion system, with stopper to limit the downward movement of the Eye piece towards stage. A adjustable holder is provided for moving magnifying lens over full area of the stage. It is easily replacable with Bull Eye Lens 80mm in dia. A plano concave mirror in fork mount for light reflection, sturdy removable hand rests and arrangement for inserting Black & white plate. Duly packed in wooden cabinet with the following optics:| Eye piece: | 10x & 15X and Bull Eye Lens 80mm dia. | |
| Stage size: | 100mm x 100mm |
4 Stroke 4/3 Cylinder Petrol Engine
4 Stroke 4 Cylinder Diesel Engine – Motor Driven Actual Cut Section Working Model With Valve Timing Attachment
The engine be sectioned to show the internal constructional details.The working of individual part and accessories like Valves,Pistons,pumps,Crank and Camshaft,etc.will be demonstrated.It is provided with Flyweel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes.The actual cut section engine will be supplied with key card & very interesting literature regarding working.
