XTEMOS ELEMENT
AJAX PRODUCTS TABS
Tincture Press
Product Description
We further offer a range of Tincture Press, which is conceptualized for separation of marc of herbsand extracts made by percolation / maceration / extraction of herbs & solvents by pressing method. The unit consists of double chamber that includes a plunger pressing plate of approx. ½ inch of thickness, supposed to move inside the chamber with the support of hand operated mechanicalrotation pressing system. The unit is further attached with an outlet valve. The whole assembly is mounted on heaving M.S. base stand with M.S. / S.S. sieve for filtration purpose.Specifications
Available in Industrial Model. All the contact parts are made of St. Steel.
Linear IC Trainer
This Trainer Consist of :
1. Regulated power supply of ± 12 V / 250 mA.
2. Variable 0 to ±5 V / 250 mA.
3. Sine wave oscillation of 1 KHz.
4. Digital Voltmeter of 0-20 V DC, LCD display, 3 ½ Digit.
5. Functional diagram of IC 741 is printed with 2 mm sockets.
6. One extra 8 pin IC Base with 2 mm sockets.
7. Potentiometer of 10K Ohms.
8. Required Resistance and Capacitances mounted on board.
9. Interconnection Leads and Manual to perform 15 experiments on IC741 e.g. inverting, non-inverting, summing, difference, multiplier, differentiator, integrator etc.
Bryophyta
| Anthoceros Thallus VS | Anthoceros Cporophyte LS |
| Marchantia Thallus VS | Marchantia Gemma Cup VS |
| Marchantia Antheridial Head VS | Marchantia Archegonial Head VS |
| Marchantia Sporophyte VS | Moss Protonema WM |
| Moss with Capsule WM | Moss Leaf TS, WM |
| Moss Archegonia WM | Moss Stem TS |
| Moss Archegonial Head WM Moss Antheridia WM | Moss Antheridia Head VS |
| Moss Capsule LS, WM | Moss Capsule TS |
| Porella Veg. WM | Porella Antheridial WM |
| Porella Archegonial WM | Riccia Thallus TS |
| Riccia Antheridial VS | Riccia Thallas WM |
| Riccia Archegonial VS | Riccia Mature Sporophyte VS |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Unit Cubes
Interlinking Cubes are one of the most widely-used math manipulative in the world. The colorful, interlocking cubes help children to learn number and math concepts. These cubes represent units and link in all direction. Interlinking cubes are used for patterning, grouping, sorting, counting, numbers, addition, subtraction, multiplication, division and measurement. Each unit is a cubic centimeter measuring 1 cm x 1 cm x 1 cm
Tubes, Culture, Media, Round Bottom with Screw Cap and PTFE/Rubber Liner
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Half Wave / Full Wave And Bridge Rectifier Apparatus
Objective : To study Efficiency and Ripple factor in case of Half wave, Full wave and Bridge rectifier on application of load and filters.
Features : Instrument comprises of AC Power Supply, 3 meters to measure Output Voltage, Output Current and ripple factor on electronic AC Voltmeter, 4 PN Junction Diodes, Filter Circuit kit, load Resistances selectable using bandswitch and all important connections points at 4mm Sockets.
Optional Acc : Digital AC millivoltmeter.
Instrument Tray
Acquire from us comprehensive range of Instrument Tray which is well reckoned for its quality.
This Instrument Tray has cover which fits into groove of trays to minimize spillage of material.
Smaller size can be used to sterilize small instruments whereas the larger size allows pipettes to be fully immersed in disinfectant prior to sterilizing.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Instrument Tray 220 x 150 x 70 mm | 2 | |
| Instrument Tray 450 x 150 x 70 mm | 2 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Pulleys Bench Clamp Fitting
Tubes, Amber Colour Culture, Media, Round Bottom with Screw Cap and PTFE/Rubber Liner
Worm Roller Type Steering System
Steering System – Actual Working
Manual Steering System
Type – Worm & Roller Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Underground Mine Model
Cryo Bath
Cryo Bath are one of the very important equipments which are used in several laboratory utilities.
These cryo baths are generally used for the purpose of freezing down the tissue samples at drastically low temperatures in very quick span of time while keeping the samples intact, distortion free and free from microscopic ice crystals.
Features
Micro-controller based temperature controller for temperature control. The unit is mounted on castor wheels for ease of mobility. Circulating pump for uniform temperature. Cabinet construction with stainless steel interior tanks to withstand critical applications. Audio visual alarm for controlling temperature deviation from preset temperature. Display of set value & process value. Integrated industrial strength pump for internal circulation. Temperature uniformity throughout the liquid medium. Rounded corners for better water circulation, improved uniformity and easier cleaning. Foam in placed PUF insulation for improved temperature stability and energy efficiency. 316 stainless steel construction for resistance against chemicals and simplified cleaning. Long-life heating elements for quick response to controller. Attractive front panel bezel for easy cleaning. GMP model: Inner chamber is made of 0.8 mm thickness and outer is of S.S 304, 1.0 mm thickness. NB: Specifications are subject to change without prior notice.Below mentioned are other details of our range of Cryo Bath
| Operating Voltage | 230 V AC | |
| Heating Power | 1250 W. | |
| Protection Fuse | 10 amps. | |
| Temperature | 0 to 40 °C | |
| Accuracy | ± 0.2 °C |
Storage Vial
These polypropylene vials add to the existing range of Polylab storage vials.
Available in 5 ml. & 10 ml. capacities, these vials have polypropylene cap with built in seal ring which makes it a leak proof vial.
These vials are also used for the storage of biological material, animal & human cells etc.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Storage Vail 2.0 ml | 500 | |
| Storage Vail 5.0 ml | 500 | |
| SV - 10 ml | 500 | |
| SV - 5 ml | 500 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Bridge Rectifier
Bridge Rectifier is made of four diodes connected in a bridge circuit. It is housed in a plastic moulded box. This bridge rectifier converts alternating current (AC) into direct current (DC). It provides the same output polarity for either input polarity. All the electronic devices require direct current, so bridge rectifiers are used inside the power supplies of almost all electronic equipment. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
Cytology Mitotic Cell Division
Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab.
Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Interphase Stage
Prophase Stage
Metaphase Stage
Anaphase Stage
Anaphase Stage
Telophase Stage
Set of 5 Slides, as above
Burner Bunsen-Economy
Description
This is one of most inexpensive option without flame stabilizer. The burner tube is made of brass and mounted on pressed steel powder coated base. Base dia is 80 mm. overall height of burner is 135 mm burner tube dia 12 mm. Suitable for LPG / Butane gas.Burner Specifications :
Tube Dia. - 12 mm Height - 130 mm Weight - 160 g
Beaker (Polypropylene)
We are the renowned Exporter and Trader of high quality Beaker (Polypropylene).
These Polylab Beakers, molded in Polypropylene, have excellent clarity and very good chemical resistance.
These autoclavable Beaker (Polypropylene) have prominently raised graduations on the outer surface.
Pouring a solution becomes very convenient because of its tapered spout.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Beaker 50 ml | 12 | |
| Beaker 100 ml | 12 | |
| Beaker 250 ml | 12 | |
| Beaker 500 ml | 12 | |
| Beaker 1000 ml | 6 | |
| Beaker 2000 ml | 6 | |
| Beaker (Euro Design) 25 ml | 12 | |
| Beaker (Euro Design) 50 ml | 12 | |
| Beaker (Euro Design) 100 ml | 12 | |
| Beaker (Euro Design) 250 ml | 12 | |
| Beaker (Euro Design) 500 ml | 12 | |
| Beaker (Euro Design) 1000 ml | 6 | |
| Beaker (Euro Design) 2000 ml | 6 | |
| Beaker (Euro Design) 5000 ml | 2 | |
| Beaker (Printed Graduation) 50 ml | 12 | |
| Beaker (Printed Graduation) 100 ml | 12 | |
| Beaker (Printed Graduation) 250 ml | 12 | |
| Beaker (Printed Graduation) 500 ml | 12 | |
| Beaker (Printed Graduation) 1000 ml | 6 | |
| Beaker (Printed Graduation) 2000 ml | 6 | |
| Beaker (Printed Graduation) 5000 ml | 2 | |
| Beaker (Printed Graduation) 10000 ml | 2 |
Manual Steering System
Steering System – Actual Working
Manual Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Oscilloscope
This is a portable type of Oscilloscope for two traces. The band width is 0-20 MHz. The instrument is of easy operation with comfortable controls. Its reasonable structure and technology makes it convenient to repair and calibrate.
(1) Dual Trace Dual Channel Oscilloscope with Component Test Facility
(2) Bandwidth : 20 MHz
(3) Full bandwidth sweeping circuit is used in the sweeping system
(4) The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
(5) ALT trigger to observe signals from two irrelative channels
(6) The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
(7) From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the external frequency counter
(8) Y deflection operation : Y1, Y2, ALT, CHOP, ADD, mode X-Y
(9) Vertical Deflection : 5 mV / Div to 20 V / Div in factor 1-2-5 sequence in 12 steps
(10) Rising time : < 18 nS (11) Maximum Input Voltage : 400V (DC + ACp-p) (12) Triggering Source : Y1, Y2, ALT, POWER, EXT (13) Trigger Coupling : AC / DC (EXT), NORM / TV-H, TV-V (14) Horizontal Sweep Mode : AUTO, TRIG, LOCK, SINGLE (15) Sweep time factor : 0.1 uS / div to 0.2 s / div in 1-2-5 sequence in 20 steps (16) Magnification : x10 (17) X-Y Mode input : X-Axis Y1 and Y-Axis Y2 (18) Z Axis minimum input level : TTL Level (19) Component Test Facility (20) Calibration Signal : Square wave of 0.5 V at 1 kHz (21) CTR Display size : 8 cm x 10 cm (22) Auxiliary Power Supply : 220V 50Hz AC
4 Stroke 6 Cylinder Petrol Engine V-6
4 Stroke 6 Cylinder Petrol Engine (V-6) Motor Driven Actual Cut Section Working Model
The engine be sectioned to show the internal constructional details.The working of individual part and accessories like Valves,Pistons,pumps,Crank and Camshaft,etc.will be demonstrated.It is provided with Flyweel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes.The actual cut section engine willbe supplied with key card & very interesting literature regarding working.
