XTEMOS ELEMENT
AJAX PRODUCTS TABS
Basic Electro Pneumatic Trainer Kit
Features
• This trainer kit helps to design the circuits with logic sequence. • FRL unit receives air from compressor then filters, regulates & lubricates the air. • 5/2 direction control valve provided to control the double acting cylinder. • 3/2 direction control valve provided to control the single acting cylinder. • One way flow control valves provided to control the air flow. • Magnetic read switches are provided to indicate the position of the cylinder. • Control module controls the direction control valves using Switches, Relays and Timer.
89V51 Development Board
Specification:
• High Performance P89V51RD2 device • On board ON/OFF switch and programmer / execution switch • 4x4 Matrix Keypad interface • 8-way DIP switch for digital logical input selection • 8 LEDs for digital output • One 16x2 Alphanumeric LCD display • 4x4 Matrix Keypad, On board 16x2 LCD • Real Time Clock (RTC) interface with four Functional keys • RS232 – UART interface with two status LEDs • All the 32 I/O lines are terminated via 4 FRC connectors • On board 0.5Kg Stepper motor with driver circuit • 2 nos of 12V relay for DC Motor • Software compatible for both C and Assembly language • 8 channel ADC with built in analog signals, internal & external data i/p, Temperature sensor, 2 nos of potentiometer for signal separation • On board DAC with buzzer
Horizontal Laminar Air Flow
Specifications
We deal in of horizontal laminar air flow that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality. Direction of flow: Horizontal. Cleanliness: CLASS 100. Velocity: 90 FPM + / -20%. Hepa Filter: Size and QTY. will depend on the Size selected. Particle retention: Above 0. 3 micron. Blower Assembly: 1 / 3 HP, 1440 RPM. Noise level: 65 decibel + / -5%. Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM). Vibration level: < 2. 5 micron.Sizes mm.
60x60x60 90x60x60 120x60x60
PLC-SIE2 with Demo Panel Training Kit
This trainer consists of PLC, Demonstration Panel & Programming Software.
PLC Specification
• Make : SIEMENS • Model : CPU1212C • Digital Inputs : 8 Nos • Digital Outputs : 6 Nos • Program Memory : 24KB • Data Memory : 10KB • PLC to PC interface : PROFINET • PWM & HSC channels provided • Windows based programming software providedPanel Specification
• SPDT switches provided for Digital inputs • LEDs provided with fuse protection for Digital outputs • Inbuilt 24V DC power supply provided • Connectors provided for external interface applicationsXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Pulleys
Brush, Cylinder
Mock Layout Of Car Wiring Latest Type
Mock Layout Of Car Wiring Latest Type
All the components used in the apparatus are of modern car. The complete mock layout is beautifully divided into 5 sections as under
(A) Front Lighting Panel
(B) Dash Board Panel
(C) Ignition System
(D) Rear Lighting Panel
(E) Motorised Charging System
With the help of this mock layout system its becomes very easy for the students to understand the actual working of electrical system of a modern car.
Prospector Tilting Level
Description
Size 178 mm /7 Internal focusing, anti reflection coated optics with tilting arrangement and Fitted with revolving horizontal circle graduated to read 6 minutes with vernier and a provision to preset zero degree quickly. The tilting drum is graduated to read 1 : 5000 is incorporated for fine adjustment and accuracy. Supplied with accessories and adjusting tools Packed in PVC Plastic box with Aluminium telescopic stand in carrying canvas cover.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Air Core Solenoid
Description
Air Core Solenoid helps investigate the magnetic field of a long coil. It can also used with the Current Balance as an accessory to measure the force on a conductor in a magnetic field. The solenoid has coils wound on a plastic tube with approximately 575 turns of copper wire. It can carry a current of 5 A continuously or 10 A intermittently.
3 Axis Robotic Trainer
For beginners, this Trainer is very useful to learn the concept and working of a Robo. For experienced people, this helps to make new ideas. This is used to study the ROBO characteristics of arm movement. Each axis has one AC servo motor. Gripper has one miniature cylinder to pick and place the object. Software controls the ROBO arm and measures the motor axis and arm axis. Simplicity of this kit makes maintenance easier and friendly to user. This kit is very flexible to operate and easy to move. Windows based user friendly software to control the arm through microcontroller having the flexible features such as
Features
• Easy to learn • New design • Easy for maintenance • Drive by AC servo motor • Easy to programSpecification
• Arm : Jointed Arm • Axis : 3 • Motor : AC servo Motor • Gripper : Pneumatic • Drive : AC servo Motor Drive • Controller : MicrocontrollerBase
• Angle of movement : 300º • Gear Type : Spur Gear • Position Detector : Limit SwitchIntermediate ARM
• Angle of movement : 90º • Gear Type : Spur Gear, Worm Gear • Position Detector : Limit SwitchVertical ARM
• Angle of movement : 90º • Gear Type : Spur Gear • Position Detector : Limit Switch
Multiple Input/Output Process Trainer
Panel Features
• Power ON/OFF switch • Heater selection switch • Heater and pump indicators • High current fuse carrier for • Heater protection • Provision to run the stirrer • Digital panel meters • Two numbers of industrial PID Controller • Electrical test points are provided to measure the current signal • Mimic DiagramFeatures
• Two numbers of flow Transmitter (DPT) are provided to sense the flow of the liquid. • Three numbers of temperature transmitter (RTD) are provided at various stages to measure the temperature. • Five numbers of level sensor (RF capacitance) are provided to sense the level of each tank. • Industrial type Conductivity sensor is provided to analyze the conductivity of given Solution. • RTD sensor (or) Thermocouple acts as a temperature sensor. • Digital panel meters are provided to indicate the output of each sensor. • Provision to measure the conductivity. • Two numbers of motorized control valve or pneumatic control valve are provided to control the flow of the pipe line. • A powerful thyristor based power driver is provided to drive the heater power. • An industrial type water heater is used as a heat Source. • Storage tank of 50 litre capacity (SS). • Process tank of 15 litre capacity (SS). • Four numbers of acrylic tank are provided to study the response of four tank systems. • In necessary location Ball valve, globe valve and needle valves are provided. • Two numbers of stirrer are provided in the temperature process and alkaline process. • Three numbers of centrifugal pump (FHP) is used to circulate the water from storage tank. • Six numbers of rotameter are provided in the process inlet to visualize the real flow. • Regulated power supply is mounted in the panel. • All the flow lines are fitted by (SS) pipe fitting. • An over head tank is provided to give constant flow. • All the equipments are mounted in a rugged and mobile type metallic work station.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Sieve Shaker (Gyratory Motion)
Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan.
This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch).
Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil.
Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized.
This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.
| Product: | Gyratory Sieve Shaker | |
| Capacity: | 7 sieves of 150mm, 6 sieves of 300mm | |
| Design: | Table Top | |
| Construction: | Cast Iron, Painted Mild steel | |
| Motor: | ¼ HP | |
| Timer: | 0 - 60 Minutes | |
| Timer Type: | Digital / Analog | |
| Power Supply: | 220 Volts |
Larynx, 2 Parts
Spherometer
Stool Container
We export and trader high quality Stool Containers.
These containers, as the name suggests, are used for collecting stool samples.
These Stool Containers are manufactured from the high grade raw material for toughness and durability.
The cap is provided with a spoon like structure that proves helpful in lifting samples.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Stool Container 30 ml | 100 | |
| Stool Container 60 ml | 100 | |
| Stool Container 25 ml | 100 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Plantation Pots
Plantation Pots, moulded in polypropylene, are available in four different sizes.
The Plantation Pots have a downward extended rim, which provide convenient lifting even if the pot is filled.
The bottom of the pot is provided with holes for drain purpose.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Plantation Pots 100 mm | 20 | |
| Plantation Pots 150 mm | 20 | |
| Plantation Pots 200 mm | 20 | |
| Plantation Pots 250 mm | 20 |
Larynx, 2 Parts
Instrumentation Amplifier
Instrumentation amplifier is a switched gain precision operation amplifier. This is used for precise and accurate, low noise differential signal acquisition. 4mm sockets are used for the input signal. It can be interfaced with a wide range of sensors. It can take small voltage changes from a sensor and make those changes large enough to be measured using CRO. It is not able to drive a low impedance load such as a loudspeaker or relay. The output can be read on CRO. Digital multimeter may also be used to read the output. With switched gain of 5 to 1000, it can handle signal inputs over a very wide range making it suitable for almost all applications.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Insect Storage Box
Description
For pinning of insects both inside top & bottom, White hardwood / Teakwood frame with melamine lamination on top & MDF sheet bottom is nicely polished. Top & bottom lined with 8mm thick soft pinning. washable EVA sheet. Inside glazed white. Raised wall with holes for insecticide inside bottom to make box air tight and pest proof. Fitted with brass hinges. index card holder & clips. Insect Storage BoxSize 53x45x9 cm Insect Storage BoxSize 45x30x7.5 cm Insect Storage BoxSize 38x25x7.5 cm Insect Storage BoxSize 30x23x7.5 cm
Light Box and Optical Set
Description
A Robust light box in matt black finish with a 12 V 24 W axial filament lamp with flexible leads. One end of the box takes a cylindrical convex lens in an adjustable sliding mount to enable production of convergent, parallel or divergent beams. Complete with accessories which consist of: 5 Plastic blocks, one rectangular, One semicircular, One equilateral prism 60° x 60° x 60°, One right angle prism 90° x 60° x 30° and one right angle prism 90° x 45° x 45°. 3 Cylindrical acrylic lenses: one double convex, one double concave, both having the same radius of curvature and one thick convex lens. 3 Mirrors, one plane glass, one curved parabolic and one curved semi-circular. 2 Slit plates, one with three narrow and one narrow slits, the other with four narrow and one wide slits 1 Set of eight colour filters, Red, Green, Blue, Cyan, Violet, Yellow, Orange and Magenta. 1 Set of coloured cards, Red, Green, Blue, Violet, Orange, Cyan, Yellow and Pink. Complete with one spare lamp, in box.
Fungi
| Alternaria Host Leaf TS | Colletotrichum Acervulus |
| Cystopus Asexual VS | Cystopus sexual VS |
| Mucor Veg. WM | Mucor Sporangia WM |
| Mucor Sexual WM | Perenospora Asexual VS |
| Phyllactenia WM, VS | Rhizopus Veg. WM |
| Rhizopus Sporangia WM | Rhizopus Sexual WM |
| Synchytrium Host Leaf TS | Synchytrium Prosorus Aspergillus with Conidia WM |
| Erysiphae WM, VS | Morchella Fruiting Body TS |
| Penicillium WM | Yeast WM |
| Yeast Budding WM | Agaricus Stipe TS |
| Agaricus Pileus VS | Agaricus Stipe and Pileus VS |
| Puccinia Uredo on Wheat Leaf VS | Puccinia Teleuoto on Wheat Stem TS |
| Puccinia Aecidia On Barbery Leaf VS | Ustilago Spores WM |
| Ustilago with Host TS |
Fuel Supply System Diesel CRDI Type
Fuel Supply System Diesel CRDI Type (Actual Working Model) Common Rail Direct Injection.
This is an actual working model of fuel supply system of a CRDI diesel engine. The parts details is as under ::
This is an actual working model of fuel supply system of a MPFI petrol engine. The parts details is as under ::
1. Fuel Tank
2. Fuel Filter
3. Motorised Fuel Pump
4. Pressure Gauge
5. Fuel Rail
6. Fuel Injectors
7. ECU
8. Power Supply
9. Fuel Gauge & Control Panel
This model helps the student to understand about the parts & working of CRDI system. It is specially designed for demonstration purposes. The model will be supplied with key card & very interesting literature regarding working.
