XTEMOS ELEMENT
AJAX PRODUCTS TABS
Microscope Glass Slides – Plain
Atomic Model Set
We present to you, Atomic Model Set.
The Atomic Model Set consists of moulded balls of different colors & sizes along with connectors of different sizes.
The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards.
Material : Polystyrene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Atomic Model Set - Senior Set | 1 | |
| Atomic Model Set - Junior Set | 1 | |
| Atomic Model Set (Euro Design) - Student Set | 1 | |
| Atomic Model Set (Euro Design) - Teacher Set | 1 |
Linear Expansion Apparatus
Consisting of a metal rod, 500mm in length and 4.5mm diameter, enclosed in a well lagged, nickle plated brass tube with three tubules for steam, inlet, outlet and thermometer.
The metal rod to be studied is supported in the steam jacket by detachable conical cups situated at each end of the tube.
The apparatus is carried on a heavy gauge channel base at one end of which is an adjusting screw.
At the opposite end is a micrometer screw reading to 0.01mm for measuring the expansion.
Supplied complete with copper, brass & iron rods but without thermometer.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Disintegrator
Description
Highly polished hooper dia 2". 16x25mm Completed with suitable motor to work on 220V AC 50Hz single phase. Fitted with 4 steel hammers fixed to a disc of dia. 1½" through which passes a shaft being revolved at the speed of approximately 3000 RPM. Hammers are enclosed in a drum. The lower portion can be fitted with different mesh screens (sieves)-coarse, medium or fine supplied with the equipment.
Sets of metal discs
Description
For demonstrating that some metals are magnetic whilst others are not and for general ‘Metal Identification’ exercises. Comprises sixteen discs, 25 mm. diameter 2 each of Mild Steel, Stainless Steel, Brass, Zinc, Nickel, Silver, Bronze, Aluminium and copper. One of each is stamped with the name of metal. the other is unmarked.
N-P-N Transistor Unit
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Ni Cad Battery Investigation
Description
This setup is designed to investigate the charging and discharging characteristics of typical re-chargeable batter with external voltmeter and ammeter connected, you can manually measure the input and output energy by taking reading from these meters. A toggle switch is provided to select between charging and discharging. Connection are made via 4 mm plugs.
Six Phase Power Analyzer
Specification
• 6 phase measurement @ 50Hz • 6 voltage inputs (250V AC max., 50Hz) & 6 AC current inputs (5A max) • Zero crossing output for both voltage and current waveforms • 6Nos of phase sensing circuits provided to measure the phase difference of 2 waveforms • Signal Conditioning for Torque & Speed (QEP, Proximity, Optical) • After Signal Conditioned, 6 voltage outputs, 6 current outputs, 12 zero crossing outputs & 6 phase sensing outputs are terminated at 34 pin and 26 pin FRC connectors • Power input through banana sockets • Housed in a sleek cabinet
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Surface Tension Balance, Searle’s
A horizontal frame is mounted on a rod fitted to a base & carries a steel wire stretched across it, the tension of which can be adjusted by a tightening screw.
A light metal pointer with a counterpoise is attached to the centre of the wire clamp.
A pan is hung from a notch in the pointer and has a hook at its underside from which can be suspended a light weight rectangular frame or a metal clip to hold a micro slide edge.
The tip of the pointer moves over a graduated scale. With rectangular wire frame, slide clip, six micro slides & 3 meters of spare wire.
CNC Lathe Trainer With Servo Drives
CONTROLLER:
(1) Type of control system: PLC based system (2) Main Spindle Drive : AC Motor with VFD (3) Z and X Drives : Stepper drive with RAMP function (4) Input to Stepper Motor : Optically Isolated (5) Motor Drive :TTL Compatible (6) Run Speed Control : Computer controlled through software (7) Interpolation : Liner / Circular / Parabolic (8) Cycles Used :G,M,S,T,F,I,K,M,F (9) Cycles : Circular Interpolation / Canned (10) Threading : Straight / Taper (11) Power Devices : Short Circuits and over Temperature Protected (12) Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
(1) Center height : 100mm (2) Swing over Carriage : 80mm (3) Distance between Centre : 250mm (4) Longitudinal Travel : 250mm (5) Weight : 350 kg (6) Dimension in mm : 1100 x 750 x 1700 (7) Rapid Travel : 500mm/min (8) Resolution X & Z Axis : 10micron (9) Dt. Motor Power : 40V – 4A (10) Lubrication : ManualSPINDLE:
(1) Spindle Speed : Continuous Variable (2) Spindle Power : 2 HP (3) Inside Taper : MT3 (4) Speed Range : 50 to 3000RPM
Survey Compass
Description
• Compass survey is a method of surveying by taking bearings and linear distances to produce plan. • Bearing is measured using prismatic compass, while the linear distance is measured using measuring tape. • Bearing in compass surveying means angle is made by chain line or survey line by referring it to magnetic meridian or magnetic north.
Shear Centre Apparatus
Apparatus consists of sturdy base frame and Channel, Equal angle, Semicircle and Z-Section are supplied with apparatus. Standard length of each of the four sections in M. S. is supplied. Each is provided with end clamp for fixing to the rigid bracket. A special load hanger is provided so as to change the load position so that with the help of two dial-gauges, the vertical plane of Shear-centre for the particular section can be determined.
RANGE OF EXPERIMENTS:
1. Determination of the vertical plane of shear center for different cross sections commonly used for structuresXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Investigation With Mirrors Kit
Description
To Conduct basic experiments on the reflection of light from flat mirrors. The kit shows how adjacent mirrors reflect multiple images and demonstrates the principles of the periscope and kaleidoscope. The unit contains all the materials for the construction of a periscope and a kaleidoscope, including two sets of mirrors, mirror supports, and tubes. With instructions for assembly activity guide.
Urinary Bladder Model
Crystal Model Set
We offer Crystal Model Set to the esteemed clients.
The Crystal Model Sets contain different colored jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material : Polyethylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Crystal Model Set - Diamond | 1 | |
| Crystal Model Set - Sodium Chloride | 1 | |
| Crystal Model Set - Graphite | 1 |
Spartan 6 Trainer Kit
Features
• 16 Nos. of digital input using slide switches with LED indication • 16 Nos. of digital output using discrete LEDs • 16× 2 LCD is provided for display the text message. • One Reset Switch • One switch for giving manual clock • FPGA configuration through - On board Xilinx USB to JTAG Programmer with isolation to configure FPGA - On board Flash Prom XCF04S (Programmable through USB to JTAG programmer) • Total 186 I/O Pins: 100 Pins used for integrating peripheral like LED, Switches etc., balance pins are available to user • In 3nos of 20 pin header. • 1 No of 26 pin header to interface VLIM cards like Traffic Light Controller / On-board TLC (factory settable). • On board programmable PLL oscillator from1 MHz to 100MHz using jumpers • 4Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor drive provided on board (Motor Optional) • 4x4 matrix key provided • On board I2 C RTC Interface • On board Temperature Sensor Interface • SPI Based Analog to Digital ConverterXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Expansion of Liquids Apparatus
Description
Comprising five removable glass tubes in a sliding frame and supported in a water trough. For demonstrating the different thermal expansions of various liquids. Comprising five glass tubes in a frame and supported in a water trough. The frame has a special sliding arrangement with clips to hold glass bulbs with tubes. The bulbs can be easily removed and fixed and have funnel formation on top for easy filling.
Spherometer Laboratory
Spherometer Laboratory
• Brass dial head 40 mm diameter, mounted on stainless steel screw.
• Head divided into 100 divisions, reading to 0.01 mm and registering on vertical scale 10-0-10.
• Frame with three legs of stainless steel.
• Distance between two legs is 40 mm approximately.
• Pitch 1mm.
