XTEMOS ELEMENT
AJAX PRODUCTS TABS
Conductivity Appratus Ingen – Hauzs
Description
Consists of 5 metal rods of different materials having equal lenghts mounted in sheet metal box 150 x 90 x 100mm with corks. Metal rods 150 x 3 mm length x diameter, one each of aluminium,brass, copper, lead and iron, embedded along one side of a metal tank size 150 x 90 x 100 mm length x width x height.Wireless Connectivity Kit
A Powerful Wireless Connectivity board is designed based on Sitara AM335X Cortex-A8 for detailed and combined study of different Wireless Communications. All in one Wireless Kit contains GSM/GPRS, GPS-GLONASS SBAS (GAGAN), ZIGBEE, RFID, Bluetooth and Wifi on board modules. It supports Linux, WinCE and Android OS Packages which can be used to study different applications like GPS tracking, wireless home and industrial security system, SMS and ZigBee based home application and lighting control and many more.
Features
• TI Sitara AM3354: - ARM Cortex-A8 32-Bit RISC Microprocessor NEON SIMD Co-processor - SGX530 Graphics Engine • DDR3 RAM : 4 GB • NAND Flash : 4 GB • 7” TFT Display Interface • Touch panel (Resistive and Capacitive) interface • On board WLAN (802.11 b/g/n), Bluetooth (802.15) • USB 2.0 – Host, OTG • Serial Interface : UART, SPI, I2C • On board - 10/100MPPS Ethernet PHY • Audio : - Digital Microphone - Multichannel Audio Serial Port (McASP) • Analog to Digital ConverterDigital Colorimeter
Description
The basic set-up of the colorimeter is: LED light source: Produces polychromatic light over the entire visible region, 45 Broad spectrum filter: The colorwheel has nine different filters. The filter employed is selected by wavelength. Each filter will produce monochromatic light at a specified peak wavelength with a bandpass of 20 mm. The filters enable the user to perform tests from 400 to 680 nm. Cuvette Holder: It holds the inserted cuvette during testing. It is imperative the cuvette be consistently oriented in the holder. Round cells usually have orientation markings to correctly position the cuvette. Detector: A silicon photo diode is used as the detector. The photo detector current will change as a function of light energy. Display:The current signal from the detector is converted to a numerical value, absorbance and is shown on led displayXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Insect Showcase Cabinet (Small)
Description
For keeping insect storage & display showcase of Size 45 x 30 x 6.5 cm (RI-62-02). Cabinet frame of plyboard with melamine lamination. Hinged door is provided with lock and handle and is lined with velvet. Insect Showcase Cabinet (Small) with 6 Show cases Insect Showcase Cabinet (Small) with 12 Show cases Insect Showcase Cabinet (Small) with 24 Show casesLaser Distancing Meter
Description
Laser Distancing Meter The professional Laser Distance Meter is designed to give special users a high accuracy, one person distance measuring and estimating tool measure remote and difficult reaching places. The compact and handy base model was specifically designed for indoor applications. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation make measuring fast and very reliable. The last 20 measurements are also stored. Simple to Operate: Due to the shortcut keys addition and subtraction, as well as surface and volume calculations could be easier. Features : Area, Volume Calculations Indirect measurement using Pythagoras Addition/ Subtraction Continuous Measurement Min/ Max. Distance Tracking Display illumination and multi-line display Buzzer indication Multifunctional end pieces.Displacement Vessel, Glass
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Three Phase Cyclo Converter
This module is designed for three phase half wave-step down cycloconverter. It consists of 18 Synchronized firing pulses, 18 SCRs, Relevant power supply and circuitry for frequency divisions.
Specification
• Eightin nos. SCR with RC snubber protection is provided for 3phase • cycloconverter power circuit (each phase consist of 6 SCRs) Rated at 1200V@25Amps. • Three nos. center tapped inductor (0%.50%, 100%) is provided for power circuit. • Eightin nos. Isolated gate pulses for SCR power circuit. • One potentiometer is provided to vary the frequency. • One potentiometer is provided to vary the output voltage. • MCB protection. • Housed in sleek screen printer cabinet. • Provision for V/F control Power Supply. • Input 440V ± 10%, 50HZ three phase AC supply. • ± 15V DC, 9V, 9V, 9V AC (3phase) for the firing circuits. • 24-0-24V 3phase input for power circuit.Intestinal Villi
Human Nose, L. S.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Pulleys Bench Clamp Fitting
Water Bath Incubator Shaker
Specifications
Similar to other water bath but fitted with inbuilt shaker for differrent experiments demanding shaking at constant speed under controlled temerature conditions. The temprature is controlled by capillary type thermostat from ambient to 100°C. RPM range :- 40-140 with variable electronic speed regulattor workable on 220V AC 50 Hz Single Phase.| Chamber Size In mms (dia x depth) | Capacity (L) | |
|---|---|---|
| 275x275x150 | 12 L | |
| 405x300x150 | 18 L |
Optional (Extra Cost)
Microprocessor PID digital temp. indicator cum contrroller. Digital RPM meter. Auto cut off device when water level is low.Meter Scale, Hardwood
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Refrigeration Air Conditioning Tool Kit
Xilinx Spartan 3E FPGA Trainer Kit
Specification
• XC3S250E - 4PQ208C / XC3S500E-4PQ208C • 16 Nos. of digital input using slide switches with LED indication • 16Nos. Of digital outputs using discrete LEDs • 16 x 2 LCD is provided for display the text message. • One Reset Switch • One switch is provided for giving manual clock • FPGA configuration through - JTAG Port - On board Flash Prom XCF02S • Total 158 I/O pins : 124 pins used for integrating peripherals like LED, Switches etc., balance pins available to user in 20 pin • header (3.3V compatible) • 1No of 26pin header to interface VLIM cards like Traffic Light Controller (5V compatible) • On board programmable PLL oscillator from 1 MHz to 100 MHz using jumpers • 4 Nos of 7 segment LED display • One relay and Buzzer provided. • Stepper & DC motor Driver provided. • 4 * 4 matrix key provided • Housed in a sleek plastic cabinet with built in SMPS 5V/2A. • Compatible with Xilinx ISE Design Suite WebPACK Software. • On board USB to JTAG is available for configure FPGA (Supports only with Vi JTAG 5.0 Software)4 Stroke 4/3 Cylinder Petrol Engine
4 Stroke 4 Cylinder Diesel Engine – Motor Driven Actual Cut Section Working Model With Valve Timing Attachment
The engine be sectioned to show the internal constructional details.The working of individual part and accessories like Valves,Pistons,pumps,Crank and Camshaft,etc.will be demonstrated.It is provided with Flyweel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes.The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Human Skin
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
















