XTEMOS ELEMENT
AJAX PRODUCTS TABS
Anti Lock Braking System ABS Trainer
Anti Lock Braking System (ABS) Trainer
All modern car are now days fitted with anti lock braking system. This trainer helps the students to understand the working of ABS. The trainer consists of the following parts.
1. Control Panel,
2. Break Light,
3. ECU,
4. ABS Hydraulic Activator,
5. Break Lever,
6. Pressure Gauges,
7. Common Pressure Gauge.
An anti-lock braking system (ABS) is a safety system that prevents the wheels on a motor vehicle from locking up (or ceasing to rotate) while braking. A rotating road wheel allows the driver to maintain steering control under heavy braking by preventing a skid and allowing the wheel to continue interacting tractively with the road surface as directed by driver steering inputs. ABS offers improved vehicle control and decreases stopping distances on dry and especially slippery surfaces for many drivers, but on loose surfaces like gravel and snow-on-pavement it can slightly increase braking distance, while still improving vehicle control. Stopping a car in a hurry on a slippery road can be very challenging. Anti-lock braking systems (ABS) take a lot of the challenge out of this sometimes nerve-wracking event. In fact, on slippery surfaces, even professional drivers can’t stop as quickly without ABS as an average driver can with ABS.
Spotting Plate
Description
FEATURES
Porcelain spotting plates made with high purity raw material. Uniform quality, resistant to acid and alkalai. Designed to withstand sudden temperature changes without cracks or deformation. Glazed surface with 21 mm diameter depressions. Under normal conditions, the glazed pieces can sustain a temperature of 1050°C.Available in
6 holes 12 holes
Level Process Controller
Features
• It is a miniature version and occupies less space. • A RF capacitance Level Transmitter is used to sense the tank level. • An Industrial standard electro pneumatic converter is used to control the control valve. • A Pneumatic control valve is used to control the Level of the tank. • A Process tank of 3 liter capacity with graduated level scale. • A Rust proof reservoir tank (SS) capacity of 8 liters. • A centrifugal pump is provided for water circulation. • An air Regulator cum filter of capacity (0-2.1) Bar is provided to regulate the Air pressure. • Bypass line provision is provided to avoid pump over loading. • Hand valve provision is provided to make the disturbance study. • All the water flow lines are fitted by SS pipes. • USB/Serial port data acquisition is provided.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Continuously Variable Transmission
Continuously Variable Transmission – Actual Cut Section
The working of CVT is shown with the help of actual parts assembled on square iron pipe frame. The CVT is driven through permanent magnet D.C. motor with variable speed control drive. RPM Sensor With Digital Display Is Also Provided. All the necessary parts of CVT are shown in actual working form. This model helps the student to understand the working of the CVT very easily. It is specially made dissectible for demonstration purposes.
Dissecting Trays
Linen Tester
Description
These are collapsible pocket magnifiers. The optical system is a single element, glass Double Convex Lens. The housing is made of machined, black high grade plastic for a high finish look. These magnifiers fold flat to fit in your pocket. Scales are etched on the inner faces of the viewerÂ’s base.
Micro Controller Development Board
Microcontroller development board is designed to train engineers about the structural design, instructions and utilize the 8051 microcontroller board. A 40 pin ZIF socket for easy insertion of 89 series microcontroller with four 10 Pin FRC connectors is provided on the board. Outputs from I/O port from microcontroller are available on FRC connectors those can be easily connect with different modules. Microcontroller Development Board consists of EEPROM with 4K memory changeable with more RTC DS1307 with 32 KHz crystal with battery backup One 12 V stepper motor with drivers.One 16 x 2 LCD display. 8 Output LED indicators. 4 multiplexed 7-segment display. 8 single bit toggle switch. 4 x 4 matrix keyboard. Single Channel ADC with potentiometer and provision of external inputs RS 232 serial communication. One 12 V DC motor driver.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Constant Mesh Gear Box Actual Cut Section
Constant Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Linen Tester
Description
These are collapsible pocket magnifiers. The optical system is a single element, glass Double Convex Lens. The housing is made of machined, black high grade plastic for a high finish look. These magnifiers fold flat to fit in your pocket. Scales are etched on the inner faces of the viewerÂ’s base.
Bi Metallic Strip
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Photo Gates & Leads
These pair of photo gates is housed in tough moulded cases giving them excellent durability.
The lamps operate on 6 Volts with a special built in circuitry which prevents lamps from damage in case higher voltage is applied accidently.
The photo gates can be connected by 4 mm. sockets to a timer and power supplies.
Ice Melting Kit
Description
Demonstrates the difference in thermal conductivity of two different materials. The kit consists of two identical blocks, one made of aluminum and other made of plastic. When an ice cube is placed on aluminum it turns into water in seconds, while on plastic block it melts slowly. The aluminum block has a larger heat capacity and a higher thermal conductivity while the plastic block has lower values of both parameters. With instructions.
Power Steering System
Power Steering System
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Pin Hole Camera
Fungi
| Alternaria Host Leaf TS | Colletotrichum Acervulus |
| Cystopus Asexual VS | Cystopus sexual VS |
| Mucor Veg. WM | Mucor Sporangia WM |
| Mucor Sexual WM | Perenospora Asexual VS |
| Phyllactenia WM, VS | Rhizopus Veg. WM |
| Rhizopus Sporangia WM | Rhizopus Sexual WM |
| Synchytrium Host Leaf TS | Synchytrium Prosorus Aspergillus with Conidia WM |
| Erysiphae WM, VS | Morchella Fruiting Body TS |
| Penicillium WM | Yeast WM |
| Yeast Budding WM | Agaricus Stipe TS |
| Agaricus Pileus VS | Agaricus Stipe and Pileus VS |
| Puccinia Uredo on Wheat Leaf VS | Puccinia Teleuoto on Wheat Stem TS |
| Puccinia Aecidia On Barbery Leaf VS | Ustilago Spores WM |
| Ustilago with Host TS |
Insect Display Showcase
Description
For display of insects in corridors, laboratory etc. MDF frame with MDf sheet bottom and glass top is nicely polished. Bottom lined with 8mm thick EVA sheet. Raised wall with holes for insecticide bottom to make box airtight & pest-proof. Fitted with clips, lool, handle, hanging hooks on ends and fluorescent tube inside. Size 90x60x11cm.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Tuning Forks welch type
Description :-
Consists of aluminum tuning forks, mallet in a wooden box.
Tuning forks are stamped with frequency and note.
Set of 8 (C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512)
Set of 13 (G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Set of 8 (C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512)
Set of 13 (G-100, C-128, C-256, D-288, E-320, F-341.3, G-384, A-426.6, B-480, C-512, C-1024, C-2048 and C-4096)
Six Phase Power Analyzer
Specification
• 6 phase measurement @ 50Hz • 6 voltage inputs (250V AC max., 50Hz) & 6 AC current inputs (5A max) • Zero crossing output for both voltage and current waveforms • 6Nos of phase sensing circuits provided to measure the phase difference of 2 waveforms • Signal Conditioning for Torque & Speed (QEP, Proximity, Optical) • After Signal Conditioned, 6 voltage outputs, 6 current outputs, 12 zero crossing outputs & 6 phase sensing outputs are terminated at 34 pin and 26 pin FRC connectors • Power input through banana sockets • Housed in a sleek cabinet
Magnetic Stirrer with Hot Plate
Maximum speed 1200 RPM.
Suitable for stirring all volumes, supplied with a teflon coated magnetic stirring bar.
