XTEMOS ELEMENT
AJAX PRODUCTS TABS
Peritoneal Dialysis Simulator
Description
For Continuous Ambulatory Peritoneal Dialysis. Designed to introduce patients, students, and nurses to the essentials of CAPD procedures and care. The realistic torso offers a realistic method to demonstrate and practice peritoneal dialysis. Success with CAPD is dependent on the patient’s following dialysis procedures with extreme care. This Life/form simulator gives the patient an opportunity to gain the confidence necessary for prolonged success with CAPD. Complete with indwelling Tenckh off catheter in a hard carry case. Dialysis materials not included.
Corcyra Cage
P-N-P Transistor Unit
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Young’s Moduluds Appratus
Comprises a scale plate carrying a 0 to 30 mm scale, and a moveable vernier readable to 0.1 mm.
Both have bars with clamping screws for the wires and hooks for the tension weight and loading masses.Supplied with clamp for fitting.
A tension weight, mass 1.3 kg approx. for the comparison wire is also included.
Complete with load masses and wires.
Ball & Ring with stand
Hydraulic Trainer Classic
Silent Features:
1. We are manufacturing cylinders for industrial applications. Our cylinders can withstand pressure up to 160 Bar. 2. Mobile and self-contained unit, only electrical connections are required. 3. Simplicity of operation and designed for amateur use. 4. Two pressure relief valves are provided in the system. One is provided inside the tank to increase the safety. 5. Hoses can withstand pressure of 188 Bar. 6. Test Pressure : 80 Bar ; Operating Pressure : 40 Bar. 7. Realistic Industrial circuits are demonstrated. 8. Special Bell housing is provided to maintain the Run out between Pump and Motor below 0.020mm. 9. Special fixtures used for pipe bending and ferrule fitting arrangement. 10. Specially designed front mounting plate. 11. System is flushed with very high velocity (4 times the working pressure) byseparate oil which maintains class A cleanliness of system. 12. Lowest pressure drop in the system to avoid overheating. 13. Cylinder are manufactured from precision honed tubes, hardened ground, hard chrome plated piston rods and imported quality seals.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Digital Coductivity Meter
| Usage | Industrial, Laboratory | |
| Material | MS | |
| Color | White |
Features
Highly Stable and Accurate Cell Constant Adjustment Facility Available in Lab & Field models Temperature Coefficient Correction facility| Display | 3 1/2 Digit LED | 3 1/2 Digit LCD |
|---|---|---|
| Range | 5 Ranges 0 - 1000 Mohs/cm | 2 Ranges 2 & Mohs/cm |
| Temperature Compensation | Manual 0-50oC | - |
| Cell Constrant Adjustment | Adjustable | Pre Adjustable |
| Conductivity Cell | Platinum DIP | Platinum DIP |
| Measuring Frequency | 1000 Hz | 1000 Hz |
| Accuracy | 1% FSI | 1% FSI |
| Power | 230v 10% | 1 x 9V Battery |
| Dimensions | 76 x 275 x 175 mm | 85 x 28 x 165 mm |
| Weight | 2 kg. (Approx.) | 0.8 kg. (Approx.) |
| Accessories | Conductivity Cell, Operation Manual, Dust Cover. | |
Tuning Forks, Set of 4
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Three Phase Transmission Line Fault Analysis Trainer
Three phase Transmission line fault Simulation Study Module
Specification
• 3 phase power supply from 3 phase generator • To simulate 3 phase balanced system fault and unsymmetrical faults • Fault study with single line and double line in 3 phase system • Faults : - L-G-Fault - L-L-Fault - L-L-G-Fault - Single Conductor open fault - Double Conductor open fault - Fault through impedance • Theoretical calculations and verification with practical results. • The transmission lines are simulated by high frequency Inductance & resistance for short, medium and long line.
Electromagnetic Field Demonstrator
Description
This apparatus demonstrates the magnetic field patterns associated with the different shapes of current carrying conductors. Comprises three conductors, each of different shape/configuration – straight rectangular, circular loop and solenoid all mounted on a plastic base. Each configuration is provided with a pair of 4 mm sockets to connect them to a low voltage DC power source, with output current not exceeding 5A With the included iron filings and 8 magnetic compasses, you can investigate the associated field and flux patterns.
Screw Gauge Micrometers
SPECIMEN JAR (RECTANGULAR JAR), With Cover
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Rear Axial Assembly With Differential Gear
Rear Axial Assembly With Differential Gear Fully Floating Type – Actual Cut Section
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Cooling System Of An Automobile
In this model the working of a cooling system of a car is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a cooling system of a car are shown in actual working form. This model helps the student to understand the working of the cooling system of a car very easily. It is specially made dissectible for demonstration purposes.
Gyroscope
Profile Projector 200mm Dia
Specifications
Bench type Profile projector is a highly precision instrument designed for most diversified jobs at industries & engineering colleges. It consists of antiglare hard glass SCREEN 200mm DIA with cross line rotatable through 360 degree with least count of 2 minute an arc. The working table is secured on a heavy hollow base provided with X-Y movement, travel upto 25 X 25 mm ,equiped with zero adjustment Micrometers of 25mm graduation having least count 0.005 mm.
Technical:
| Colour | : | White |
|---|---|---|
| Work Stage | : | 150 mm X 150 mm |
| Magnification | : | 10 X |
| Travel X & Y | : | 25 X 25 mm |
| Micrometer Head | : | 0 to 25 mm with accuracy 0.005 mm/0.01 mm |
| Screen Dia | : | 200 mm, 360 degree rotatable Frosted glass Screen graduated scale. |
| Illumination | : | 12 volt-100 Watt (Counter), 6 Volt-2o Watt (Surface) |
| Power Required | : | 220-230V AC, 50 Hz |
Main Parts of Instrument :
Screen 200mm Dia with Cross Line. Clips to hold Drawing or films. 360 degree rotatable graduated ring. Surface Light Lamp. Objective (Projection Lens). Micrometer Head with least count of 0.005mm X-Y Stage travel upto 25 X 25mm Focusing Knob for up & down motion.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Open Wind Tunnel Apparatus
Technical Description
A wind tunnel is the classic experiment system for aerodynamic flow experiments. The model being studied remains at rest while the flow medium is set in motion, and thus the desired flow around the model is generated. Open wind tunnel used to demonstrate and measure the aerodynamic properties of various models. For this purpose, air is drawn in from the environment and accelerated. The air flows around a model, such as an aerofoil, in a measuring section. The air is then decelerated in a diffuser and pumped back into the open by a fan. The carefully designed nozzle contour and a flow straightener ensure a uniform velocity distribution with little turbulence in the closed measuring section. The flow cross section of the measuring section is square. The built-in axial fan with guide vane and a variable-speed drive is characterised by an energy-efficient operation at high efficiency. Air velocities of up to 28m/s can be reached in this open wind tunnel. The trainer is equipped with an electronic two-component force sensor.Lift and drag are detected and displayed digitally. The air velocity in the measuring section is displayed on the inclined tube manometer. The tube manometers is recommended for measuring the pressure curves in drag bodies. Extensive accessories allow a variety of experiments, for example lift measurements, pressure distributions, boundary layer analysis or visualisation of streamlines. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.Learning Objectives & Experiments
– Determine drag and lift coefficients for different models – Pressure distribution when flowing around drag bodies – Boundary layer analysis – Investigation of flutter – Wake measurementFeatures
* Open wind tunnel for a variety of aerodynamic experiments * Homogeneous flow through the flow straightener and special nozzle contour * Transparent measuring section
Oscilloscope
This is a portable type of Oscilloscope for two traces. The band width is 0-20 MHz. The instrument is of easy operation with comfortable controls. Its reasonable structure and technology makes it convenient to repair and calibrate.
(1) Dual Trace Dual Channel Oscilloscope with Component Test Facility
(2) Bandwidth : 20 MHz
(3) Full bandwidth sweeping circuit is used in the sweeping system
(4) The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
(5) ALT trigger to observe signals from two irrelative channels
(6) The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
(7) From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the external frequency counter
(8) Y deflection operation : Y1, Y2, ALT, CHOP, ADD, mode X-Y
(9) Vertical Deflection : 5 mV / Div to 20 V / Div in factor 1-2-5 sequence in 12 steps
(10) Rising time : < 18 nS (11) Maximum Input Voltage : 400V (DC + ACp-p) (12) Triggering Source : Y1, Y2, ALT, POWER, EXT (13) Trigger Coupling : AC / DC (EXT), NORM / TV-H, TV-V (14) Horizontal Sweep Mode : AUTO, TRIG, LOCK, SINGLE (15) Sweep time factor : 0.1 uS / div to 0.2 s / div in 1-2-5 sequence in 20 steps (16) Magnification : x10 (17) X-Y Mode input : X-Axis Y1 and Y-Axis Y2 (18) Z Axis minimum input level : TTL Level (19) Component Test Facility (20) Calibration Signal : Square wave of 0.5 V at 1 kHz (21) CTR Display size : 8 cm x 10 cm (22) Auxiliary Power Supply : 220V 50Hz AC
Magnetic Stirrer with Hot Plate
Maximum speed 1200 RPM.
Suitable for stirring all volumes, supplied with a teflon coated magnetic stirring bar.
