XTEMOS ELEMENT
AJAX PRODUCTS TABS
Tuning Forks Set, Even Frequency
Model of Uterus And Ovaries
Low Voltage Coils, For Demountable Transformer
Calorimeter, Joule’s
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Dynamo
Brush, Erlemneyer (Conical)/ Round Bottom/ Flat Bottom Flask
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Spectrometer, Standard
Description
Reads to 6 minutes of arc (0.1°) 170 mm diameter metal scale graduated 360° x 1°, independently rotatable, with locking screw, vernier attached to the telescope reads to 0.1° (6 minutes of arc). Collimator is mounted on a fixed pillar, with an achromatic objective of 150 mm focal length and 21 mm aperture, and has an adjustable slit 6 mm long. The telescope is on a movable pillar, with a fine adjustment screw, an achromatic objective of 170 mm focal length, 21 mm aperture, Ramsden eye-piece and glass crosswire graticule. Both collimator and telescope have spiral focusing system and have axis adjusting arrangement. The table has 3 leveling screws, with lines marked to assist prism placement. With prism and grating holders, one small screw driver and one Tommy bar for axis adjustment Without prism.
Vacuum Pump
Needle Steel Handle
Suspension Bridge Apparatus
DESCRIPTION:
Cables are frequently used to support loads over large spans such as cable stayed for suspension bridges, cable car systems and stadium roof. They are used extensively for permanent guys on structures such as microwave towers and derricks. They are also used for temporary guys during erection. The only force in a cable is direct tension. They are too flexible to carry any moment. A cable is used to carry concentrated loads, uniformly distributed load along its length and uniformly distributed load along the horizontal span. It takes the shape of a polygon under concentrated loads, a catenary under uniform load along its length (such as its own weight), and a parabola under uniform load along the horizontal span.EXPERIMENT:
• Study the Extension of each spring Balance Left & Right Both. • Study of the effect of a point loadTECHNICAL SPECIFICATION:
• Apparatus Consists of two mild steel cables 0.5cm diameter in cross section and 150cm long, pinned to two supports 90cm apart situated symmetrically. • One of the ends can be converted to a roller by applying a known load at the end with the help of suspended pulley system. • Vertical loads can be applied at various points along the span of the beam. • A dial gauge with 25mm travel (with a magnetic base) is to be supplied with the apparatus complete with a supporting stand and a set of weights.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Electronics Kit
U Shaped Magnet
Dental Care Model (28 Teeth), PVC
Masses Aluminium
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Evolution
Turbo Charger Actual Cut Section
The working of turbo charger is shown with the help of actual parts assembled on iron base. All the necessary parts of turbo charger are shown in actual working form. This model helps the student to understand the working of the turbo charger very easily. It is specially made dissectible for demonstration purposes.
DC Servo Motor Controller
This trainer designed for versatile Applications / Experiments mentioned below. It consists of(i) a PWM Chopper Drive using MOSFET (ii) DC Servo Motor (iii) Speed Sensor (v) PI Loop for speed. This trainer system is a compact & advanced version for class room experiment setup for the students to operate and study a practical speed measurement using optical sensor and speed control system.
FEATURES:
• One 12V PMDC Motor mounted on a open frame. • Speed Range: 0 to 1500 RPM. • Speed Sensor fixed on the frame. - Photo interrupter with optical Encoders. • One F/V converter is provided to convert the pulses to voltage output. • Speed controller provided to select - Proportional circuit. - Proportional plus Integral circuit. • One 3½ digit display to display the speed of the DC Servo motor / set value. • A switch provided to select the reference or the actual speed. • All important signals are terminated at sockets. So that, the student can monitor / measure the signals using CRO, DVM, Frequency counter etc.
Wave Machine, Powell’s
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Rotary Air Compressor Test Rig
The Apparatus consists of a rotary vane compressor driven by an electric motor; Air intake is measured by an orifice meter and manometer, Discharge “pressure is measured by a pressure gauge. Power input of the compressor measured by an Energymeter. Thus the students can determine volumetric efficiency, power consumption and free air discharge of compressor.
SPECIFICATIONS:
1.Vane compressor – Rotary compressor, driven by 3 HP motor. 2.Calibrated orifice meter with water manometer to measure air intake. 3.Energy meter to measure input of the meter. 4.Pressure gauge to measure discharge pressure. 5.Control valve at delivery side. 6.Stop clock. 7.A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor space of approx. 1.5 X 1.5 m. X 1.5 M. height. 2.440V, 16A, 3ph. supply. 3.Tachometer.
DDS RF Source and Network Analyzer
This unique instrument is RF source upto 1.7GHz with 10 to 400MHz in DDS mode of operation and few Network Analyzer capabilities.
Specification
• It works in two mode of operation. - 10 to 400MHz - DDS operation. - 400 to 1700MHz - PLL operation. • 10 to 1700MHz, RF signal generator. • RF Output Power: 10 to 400MHz, -2dBm, +/-3dB 400 to 1700MHz, -5dBm, +/-3dB. • Harmonics: 10 to 600MHz better than -15dBc 600 to 1700MHz better than -30dBc. • Attenuation: 5dBm, 10dBm, 20dBm, 30dBm. • Fixed and sweep RF signal source. • Direct digital synthesis (DDS) method based. • 100 KHz Channel step size. • AM/FM Modulation. • Automatic Level Control (ALC) incorporated so that, RF level output will be constant. • Graphics LCD display to plot Filter, Amplifier etc., characteristics.
Bio Periodic Tables
Description
Poly art Charts are multi colored, accurate in details, printed on plastic, laminated on both sides, washable, non-tear able and long lasting, with plastic rollers, size 75 x 100 cm. Periodic Table of Rare & Endangered species Periodic Table of Fishes Periodic Table of Vegetables Periodic Table of Fruits & Nuts Periodic Table of Birds
Arthropoda
| Daphnia WM | Cyclops Male WM |
| Cyclops Female with egg sac WM | Anopheles Male adult WM |
| Anopheles Female adult WM | Anopheles Mouth Parts Male WM |
| Anopheles Larva WM | Anopheles Egg WM |
| Cockroach Mouth Parts WM | Cockroach Malpighian Tubules WM |
| Cockroach Hepatic Caeca WM, TS | Cockroach Ovary TS |
| Cockroach Testis TS | Cockroach Leg WM |
| Cockroach Thoracic Spiracle WM | Cockroach Abdominal Spiracle WM |
| Cockroach Abdominal Spiracle WM | Cockroach Gizzard TS |
| Cockroach Trachea WM | Cockroach Striated Muscles WM, TS |
| Cockroach Wing WM | Cockroach Compound Eye VS |
| Culex Mouth Part Male WM | Culex Mouth Part Female WM |
| Culex Male WM | Culex Female WM |
| Honey Bee Mouth Parts | Honey Bee Leg with Pollen Basket WM |
| Honey Bee Sting Apparatus WM | House Fly Mouth Parts |
| Butter Fly Mouth Parts | Bed Bug WM |
| Bed Bug Mouth Parts WM | Prawn Gill TS |
| Prawn Gill WM | Prawn Statocyst TS |
| Prawn Hastate Plate WM | Prawn Compound Eye V.S. |
| Different Type of Insect Mouth parts WM | Different Type of Antenna WM |
