XTEMOS ELEMENT
AJAX PRODUCTS TABS
Coil Ignition System Of An Automobile
Jockey
LPC 2148 Evaluation Board
ON Chip Features
• CPU - LPC2148. • Core - 16/32 Bit ARM7TDMI-S. • Speed - Max 60 MHZ. • Flash - 512KB. • RAM (on-chip) - 40KB. • 46 x General Purpose I/O Pins. • USB2.0 Full speed Compliant Device. • One 10bit ADC with 14 Analog inputs. • One 10bit D/A Converter. • Two 32bit Timers/ External Event Counters. • Low Power Real Time Clock. • Six PWM, Watchdog. • Two UARTS (16c550). • Two Fast I2C (400Kb/s) Module.ON Board Features
• Eight Digital Output - LED Interface. • Two Digital Input. • 16 x 2 Character LCD Interface. • 7 Segment Display via I2C Interface. • 10 Base T Ethernet Connectivity. • SD Card Interface Support. • Audio Interface. • Jtag connector is provided for Debugger. • USB to serial interface provided.
Lagged Pipe Apparatus
Lagged Pipe Apparatus:
The apparatus consists of three concentric pipes mounted on suitable stand. The space between innermost and the middle pipe is fifed with a lagging material and the space between the middle and the outer most is filled with and other lagging material. The lagged pipe is heated with a cartridge heater inserted at the axle length of the pipe. Voltmeter and ammeter on the panel can measure the input to the heater. The intermediate temperatures can be measured by the thermocouples attached at the surfaces of the pipe. Thus the resultant conductivity of the materials can be found out.
SPECIFICATIONS:
1.Pipes : a)Gl pipe (innermost) – 6 cm. (Outer Diameter). b) Gl Pipe (Middle) – 8.5 cm. (Mean Diameter) c)G! Pipe (Outermost) – 10.7 cm. (inner Diameter) d)Length of pipes 1 Meter. 2.Heater : Nichrome wire cartridge heater placed centrally, of suitable capacity. 3.Control Panel : a)Single Phase Dimmerstat – 1 No. b)Voltmeter (0 – 250V) – 1 No. c)Ammeter (0- 2A) – 1 No. 4.Temperature Indicator : Multichannel Digital Temperature Indicator ranging (0 – 300 C) using Cr/AI ThermocouplesServices Required:
1. A.C. Single Phase 230 V electric supply 2. Floor Area-1.5 Meter X 1 Meter X 0.5 Meter HighXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
89C51 Microcontroller Trainer
Specification
• Core :NXP89C51RD2 / 8051 • Internal Memory :64KB Flash, 1KB RAM • External Memory :64KB EPROM, 64KB RAM • 16 Digital Outputs - SMD LED Interface. • 16 Digital Inputs - Switch Interface. • 20X4 Character LCD Interface. • I2C Peripherals : - 8 Bit ADC [8-Bit 4 Channel ADC, Two Potentiometer Provide in on board]. - 8 Bit DAC. • Six 7-Segments Display Interface. • On Board Stepper Motor Driver is provided. • PWM lines are terminated at Terminal Block. • IBM PC Keyboard Interface for entering program. • CPU Lines are terminated at 50 pin Expansion Header.(VBMB and VPIC) • I/O ports terminated to connect to external devices. • Program / Execution switch is provided for serial ISP (Using ISP Utility Software). • ADC, DAC lines are terminated at terminal blocks.
Telescopic Alidade
Analytical Funnel
Our exclusive Analytical Funnel is designed specifically for analytical chemistry; the body of the Analytical Funnel is 60".
Moulded in polypropylene, these Analytical Funnel is provided with internal & external ribs to prevent air blockage.
We offer our Analytical Funnel at market leading prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Analytical Funnel 35 mm | 72 | |
| Analytical Funnel 50 mm | 72 | |
| Analytical Funnel 62 mm | 36 | |
| Analytical Funnel 75 mm | 36 | |
| Analytical Funnel 100 mm | 36 |
Water Table Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Automatic Level
Description
a) Manufactured meticulously using International Standard. b) Tightly sealed construction for use in any weather. c) Fast accurate two-speed focusing. d) Friction-braked rotation and endless horizontal drive. e) Optical sight for quick pointing. f) Metal circular bubble. g) Fit all tripod with G5/8" or M16 screw.Optional accessories :
Metal or wooden tripod, metal or wooden staff range pole, measuring rope, plumb etc
Displacement Vessel, Glass
Water Bath Tissue Flotation
Specifications
Double walled round construction. Inner chamber stainless steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80°C. Complete with indicators, wire & plug. To work on 220V AC.Chamber Size In mms (dia x depth)
200x75 250x125
Rotary Compressor Actual Cut Section
This model will be made out of original parts. The model will be suitably sectioned to demonstrate the internal construction details showing the minute information, and working of the same, the model will be suitably painted and mounted on a metal or wooden base & supplied with key card & very interesting literature regarding working of the same.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
CPR Training Manikins(torso)
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Falling Body Apparatus
L-Section launcher with holes for locating two 19mm.
diameter steel balls which act as projectiles.
Launcher is released by push button and projects one ball forward while allowing the other to fall freely Launching mechanism mounted on wooden block, 180x60x30mm.
which may be clamped by bench and has a convenient storage pocket for the balls.
Complete with two steel balls.
ZigBee Sensor Battery Board
ZigBee is one of the advanced Wireless technology and CC2530 is the Second Generation System On chip, Which has integrated Microcontroller with IEEE 802.15.4 Compliant and ZigBee RF transceiver. Vi ZigBee development Kit includes the hardware using CC 2530 and software to support the ZigBee protocol.
Features
• 2-AA battery holder integrated • 2 user LEDs • 2 user key • Light sensor • ADC Trim pot • RF Module connectivity • USB to serial connector • ADC channels are terminated via 3 pin connectors • All the IO lines are terminated via 20 pin header • 3 pin connector provision for I2C and SPI interface.
DC Motor Kit
Description
A simple kit for students to gain insight into field poles, armatures and switches, one mounting base, two coils of insulated wire , field pole, mounting bracket, two armature halves, one piece of insulating tubing, motor shaft, two commutator insulators, two bronze wire brushes, two shaft supports, four paper fasteners, a AA battery holder and 6 each of screws and nuts. Requires one AA battery, not supplied, with assembly instructions.XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Ticker Tape Timer
For the measurement of velocity and acceleration, using timing marks made on a moving paper tape by a vibrating striker.
Designed to operate on a 12V A.C. supply and uses the mains frequency as its timing standard.
The unit is housed in a moulded case including mounting flanges.
The top of the case caries a tape guide which incorporates a carbon paper disc support and an adjustable anvil for the striker point.
All moving parts are fully enclosed and a pair of 4mm sockets are provided on the side of the case for connection of the electrical supply.
Supplied with a roll of self marking paper tape.
Paper tape : 100m of paper tape, 9.5mm wide.
Carbon Paper Discs : 40mm diameter, with 3mm hole, cut from long life plastic film type carbon paper.
Desert Cooler Trainer
Desert Cooler Trainer works on the principle of evaporative cooling. It is used mostly in the dry hot regions; it consists of a fan which sucks the air from atmosphere through the pads which are used in desert coolers very frequently. The difference in DBT & WBT at inlet and outlet can be measured hence the RH from the charts. Also the amount of water evaporated can be calculated by knowing the water level difference in the reservoir.
SPECIFICATIONS:
1.Fan connected to 1/2 HP motor. 2.Air Cooler Pump to circulate water. 3.DBT & WBT Measuring Thermometer at inlet and outlet. 4.Orifice meter with manometer to measure the air flow. A technical manual accompanies the unit.SERVICES REQUIRED:
1.Floor Area – 1, X 1 m. X 1 -5m. Height. 2.220 V., 15 Amp. , Single Phase Stabilized power supply
Charle’s Law Apparatus
Description
To determine co-efficient of expansion of a gas at constant pressure. A glass U-tube with a bulb and stopcock at one end, the other limb being open. An outlet tube from the bottom of the U tube passes through a rubber bung and has a stopcock at the end. The stem below the bulb is graduated 3 x 0.1 ml. An inlet tube with a mohr clip also passes through the bung. A glass water jacket encloses the U tube. All glass parts made of borosilicate glass requires only 20 ml mercury, which is not included.
Reptilia Histology
Educational Equipments Manufacturer, Exporters & Suppliers - School Educational Equipments Manufacturers & Exporters of Educational Equipments for Lab.
Science Lab Products, Teaching Aids, Classroom Instruments, Educational Laboratory
Skin VS
Tongue TS
Oesophagus TS
Duodenum TS
Intestine TS
Rectum TS
Liver TS
Pancreas TS
Trachea TS Lung TS
Kidney TS
Ovary TS
Testis TS
Spinal Cord TS
Brain LS
Brain TS different Regions
Organ of Jacobson's TS
