XTEMOS ELEMENT
AJAX PRODUCTS TABS
2 Axis Robotic-MatlabTrainer
This Robo Trainer is working along with Matlab. Two axisrobo consists of two AC Servo Motors which are made to rotate using PWM pulse output of the controller. Two rotational encoders are present to determine shaft position of the motors. One AC Motor is used to rotate the handle from 0 to 360°, and the other is to move the handle up and down which can cover a distance of 450 mm. Pneumatics ARM is used for the application of pick and place of an object.
Specification
• Horizontal Handle Rotation - AC servo Geared motor - 500 rpm - 0 - 300º Rotation • Vertical Handle Rotation - One AC servo Geared motor - 500rpm - 450mm Movement • Pneumatic Gripper - 12mm Bore Diameter - 25mm Stroke Length - Miniature cylinder type - 1kg Pay load
Human molar Teeth
CNC Mill Trainer
CONTROLLER:
SIEMENS 802D Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety, 1.5 HP X, Y and Z Drives : SIEMENS Servo Motors and Drives Input to Stepper : Optically lsolated Motor Drive TTL compatible Interpolation : Linear, Circular parabolic Interpolation, Slot / Pocket Milling Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std CodesTABLE:
Length x Width : 450 x 175 (approx.) Clamping Area : 350 x 175 (approx.) T Slots : 10mm slot widthMACHINE DETAILS:
Resolution : 5 micron Tool Change : Automatic, 8 station Rapid Travel : 5000mm/min Weight in kg : 750kg Dimension in mm : 850 x 850 x 1550 mm Automatic Lubrication : Provided Repeatability : 10 micronSPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 100 to 4000 RPMAXIS TRAVEL
Longitudinal Traverse : 250mm Cross Traverse : 175mm Vertical Traverse : 250mmXTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
JUMBO CONDENSER CLAMP
PRODUCT DESCRIPTION
4 Fingers covered with Silicon Sleeves, Jaws do not cross over; can hold upto 125 mm. dia. with 300 x 10 mm. C.P. rods. Brass casted, Chrome Plated.
AVAILABLE IN DIFFERENT TYPES:
-
- Jumbo 3 Finger Clamp (Aluminium Casted)
- Jumbo 4 Finger Clamp (Aluminium Casted)
- Jumbo 4 Finger Clamp (Brass C.P )
- 3 Finger Clamp with two keys independently operated (Al.Casted)
- 3 Finger Clamp with two keys independently operated (Brass C.P)
Air Conditioning Trainer General Cycle Type
The unit consists of ducting fitted with various air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is provided. Cooling circuit consists of a hermetic compressor; air cooled condenser, thermostatic expansion valve and evaporator (i.e. cooling coil). Measurements of various parameters Torn cooling cycle and heating cycle are provided and students can easily visualize and understand the basic principles of air conditioning.
SPECIFICATIONS:
1.Cooling circuits – It consists of: a) Hermetic compressor, having the capacity of 2/3 ton of refrigeration (approx.) using R-22 refrigerant. b) Rotameter for liquid refrigerant flow measurement. c) Pressure gauges for high and low pressure. d) Prescott (i.e. high and low pressure cut-out). e) Thermometers for temperature measurement at various points In the cycle. f) Energymeter for compressor input measurement. g) Condensate measuring arrangement. 2.Heating Circuit – Air heaters with input control provided with energymeter for input measurement. Maximum heating capacity 1 Kw. 3.Steam generator and injector for humidification of air. All above components are connected to a duct of size 200mm. X 200mm. in which airflow is generated by axial flow fan. 4.Anemometer for measurement of air velocity, (range 0-15 m/sec. Following experiments can be conducted on the unit a) Cooling of atmospheric air. b) Heating of atmospheric air. c) Humidification of atmospheric air. d) Dehumidification and heating of atmospheric air. (Cooling coil acts as dehumidifier at reduced airflow.)SERVICES REQUIRED:
1.440 V, 15 A, 3 Phase supply with earthing connection. 2.Floor space area about 3 m. X 2 m.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
BOD Incubator
Specification
BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber.| Inner Chamber Size | Cap. | Material |
|---|---|---|
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | Aluminium |
| 455 x 410 x 610 mm | 4cu. Ft. or 112 Ltr. | S.S. |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | Aluminium |
| 505 x 451 x 830 mm | 6cu. Ft. or 171 Ltr. | S.S. |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | Aluminium |
| 565 x 565 x 865 mm | 10cu. Ft. or 280 Ltr. | S.S. |
Optional
Timer 0-24 hours day night cycle. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller.
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
DC Network Analyzer
Specification
• Here we provide the bi-polar Transmission Line. • Simulated long, medium & short distribution lines selectable by patching in various length of DC Transmission line • Two no of bi-polar DC generator sources with ON/OFF control and voltage regulator potentiometer. - Two wire or Three wire Transmission Line operated in +12V DC - Each DC generator are independently control by potentiometer. • 2 digital voltmeters and ammeters provided in the input side and 2 digital volt meters and ammeters are provided in the output side • of transmission line to read the input & output parameters of transmission line. • One no of microcontroller based measuring system provide to read the input and output parameters. • 4 nos of digital ammeters provided to read the load current • 4 nos of resistive load and 4 nos of lamp loads are provided to load the transmission line.
Set of Masses, Brass
Set comprises masses of brass with slots, brass hangers with hook. Fine finish, masses removable and replaceable on hanger.
Set of 9 weights, one hanger each of 10 gm. Total weight 100 gm.
Set of 9 weights, one hanger each of 25 gm. Total weight 250gm.
Set of 4 weights, one hanger each of 50 gm. Total weight 250gm.
Set of 9 weights, one hanger each of 100gm. Total weight 1000gm.
Set of one hanger 20 gm. three weights 20 gm. Total weight 100gm.
Set of one hanger 50 gm, nine weights 20 gm. One weight 10 gm. and two weights 5 gm. Total 250 gm.
Spare slotted weights and Hangers 5gm., 10gm., 20gm., 50gm., and 100 gm. are also available.
Spotting Plate
Description
FEATURES
Porcelain spotting plates made with high purity raw material. Uniform quality, resistant to acid and alkalai. Designed to withstand sudden temperature changes without cracks or deformation. Glazed surface with 21 mm diameter depressions. Under normal conditions, the glazed pieces can sustain a temperature of 1050°C.Available in
6 holes 12 holesXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Ball & Ring GRAVESANDE
Dental Care Model(With Cheek), PVC
Frequency Modulation And Demodulation
This Instrument is design to demonstrate the method to transmit signals via. Electromagnetic transmission and to study the Frequency Modulation and Demodulation. Whole instrument is placed in plastic moulded box and 2 mm banana plug leads are provided for modulation and demodulation connections.
Technical Specification:-
1. Fixed Output DC Regulated Power Supply of ±12 V.
2. Built in Modulating signal Generator of 2 KHz and 4 KHz selectable with a toggle switch with Amplitude to 3V peak to peak approximately.
3. Circuit diagrams for Modulator and Demodulator are printed on the milky white top panel
Mock Layout Of Car Wiring Conventional Type
It is an open type instructional apparatus. This unit is capable of operation when a standard battery is connected to the given terminals, Consisting of all essential parts as self starter, alternator, ampere-meter, ignition coil, distributor, 4 spark plugs, horn, long lights with dipper light, park-lights, dipper, back stop light and switches. The whole system is beautifully fitted on 100 x 80 cm base with electric motor working on 220 volts A.C and capable to drive the alternator. Without battery.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Electronic Digital Theodolite
Description
This cost-effective Electronic Digital Theodolite provides excellent performance, reliable quality and practical operation for any construction application. The body style is similar to a Topcon Digital Theodolite and is combined with easy to use operation. The smart appearance and reasonable structure is as attractive as its price. • Tribrach. • AA Rechargeable Batteries (4 each). • Lens Cap. • Operator's Manual. • Hard carrying case.
Automatic Knife Sharpener
Description
Portable, precision automatic knife sharpener with timer 0-60 minutes to adjust sharpening time. This equipment can sharpen all microtome knives up to 140 mm in length. Complete with one universal holder, two honing plates, one bottle honing glass compound, one knife inspection block and one re-dressing pad but without micro abrasives.
