XTEMOS ELEMENT
AJAX PRODUCTS TABS
Analgesiometer Tail Flick
Analgesiometer Tail Flick (Radiant Heat or Tail Flick Type): It provides pain stimulus by heated nichrome wire in a Rat's tail to determine analgesic effect of drugs.
Complete with one spare element to work on 220 A.C.
Features
Shutter operated lamp illumination system. Automatic or manual mode for detecting tail flick. Precise and reproducible results. PC Connectivity with software. Software with calibration and report generation feature. Software with auto experiment number and serial number feature. Software with provision to convert data in excel or pdf. Cut off timer to avoid damage to animal. Calibration mode using Heat Flux meter (optional device).
Tubing, Rubber, High Pressure
Slide Wire Wheatstone Bridge
Description
Consists of a resistance wire with a sliding contact and a strip of aluminum to provide two “arms” of the bridge for known and unknown resistance. Strips of heavy aluminum are provided with a single gap in each of two arms for the resistance. All components are mounted on a heavy sheet metal base with Instructions.
Conical Friction Clutch Working Model
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Micro Convavity Slides
Sliding Mesh Gear Box
Sliding Mesh Gear Box – Actual Cut Section
The working of gear box is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of gear box are shown in actual working form. This model helps the student to understand the working of the gear box very easily. It is specially made dissectible for demonstration purposes.
Dissecting Trays
Seven Segment LED Display Circuit
A common anode seven segment module is fitted on a board with 8 bit dip switch to control the each segment of seven segment LED display. The inputs A-D of a display driver are connected to the binary coded decimal (BCD) outputs from a decade counter. A network of logic gates inside the display driver makes its outputs a-g become high or low as appropriate to light the required segments a-g of a seven segment display. A resistor is required in series with each segment to protect the LEDs
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Resistance Units
Medical Microscope
Specification
Medical Microscopes is a straight tube monocular research microscope. The body can be inclined up to 90° with separate coarse and fine adjustment. Triple revolving nose-piece, double lens condenser numerical aperture of 1.2 with iris-diaphragm and rack-n-pinion adjustment. Fixed slide stage with detachable mechanical stage, plano-concave reflecting mirror inter-changeable with removable LED microscope lamp. With 10x, 15x or 5x hymenia eyepieces (2 Nos.) 10x, 45x, 100x oil-immersion (spring loaded) achromatic objectives. Magnification : up to 1500x.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
REDWOOD VISCOMETER
PRODUCT DESCRIPTION
Oil & Petroleum Testing Instruments is widely acknowledged for its high functional efficiency, excellent results, accuracy, robustness, ability to withstand extreme working conditions and low maintenance requirements. Technically advanced and durable, these instruments are offered at industry leading prices in different specifications as per the requirements of the clients.
TMS320VC5416 Based DSP Trainer
This Kit provides new performance enhancing Features such as USB Communications. This is Suitable for applications that require optimized Combination of Power Performance & area. Suitable for the range of Signal processing applications, including speech Compression / decompression Speech recogniation, echo generation and Cancellation.
ON-CHIP FEATURES:
• 160MIPS Performance, can operate upto 160MHz • Advanced multi bus architecture with one program bus, three data buses and four address buses • 40-bit arithmetic logic unit (ALU), including a 40-bit barrel shifter and two independent 40-bit accumulators • 17-bit × 17-bit parallel multiplier coupled toa 40-bit dedicated adder for non pipelined single-cycle multiply/accumulate (MAC) operation. • Compare, select, store unit (CSSU) for the add/compare selection of the Viterbi operator • Exponent encoder to compute the exponent of a 40-bit accumulator value in a single cycle • Two address generators, including eight auxiliary registers and two auxiliary register arithmetic units.ON-BOARD FEATURES:
• 4 Mbit (256Kb x 16) Flash Memory • 4 Meg (256K x 16-Bit) Static RAM for External Program/Data • 8 way DIP switch & LED • ON Board JTAG Emulator (XDS 100 version - 2) • PCM3002 AUDIO CODEC • Expansion connector for GPIO & Peripheral interface • On board USB for serial communicationXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Linear Expansion
Description
Apparatus is fitted on heavy channel base, at one end of which is an adjusting screw, at the opposite end is a micrometer screw reading to 0.01 mm for measuring the expansion. Supplied with one each of aluminium, brass and iron expansion rods but WITHOUT thermometer. Consisting of metal rod 500 mm in length and 4.5 mm dia. enclosed in a well - lagged, metal tube with three tubules for steam inlet, outlet and thermometer. The metal rod to be investigated is supported in the steam jacket by detachable rubber bungs situated at each end of the tube.
SCR Characteristics Trainer
Specification
• Basic static characteristics study trainer. • LM723 based variable DC power supply (0-30V) for SCR Vak. • LM723 based variable DC power supply (0-12V) for gate voltage of all devices. • Separate section for SCR/TRIAC characteristics. • Separate section for IGBT/MOSFET characteristics. • Two nos. fixed load resistor for all devices. • Four nos. potentiometer to vary all voltages. • LED indication for all power supply. • Three nos. digital multimeter for measurement of device parameters. • For Diac external power supply to the provided.
Human Ear, 6 Parts
Description
Four times enlarged, dissectible into 6 parts. Shows outer, middle and inner ear. Removable tymponic membrane with malleus and incus as well as labyrinth with stapes, cochlea and vestibulocochlear nerve (2 part) with two removable bone sections to close the middle and inner ear. On board with key card.
Three Step Inductor
Description
This three step inductor consists of a coil of enamelled copper wire wound over an insulated spool. The coil consists of 4 layers of 200 turns each. The tappings at 200, 400 and 800 turns are brought out at 4 mm sockets. The output inductances at these tappings are as follows. No. of turns Resistance 200, Inductor 0.3 mH, Resistance 0.6Ω No. of turns Resistance 400, Inductor 1.2 mH, Resistance 1.2Ω No. of turns Resistance 800, Inductor 5.0 mH, Resistance 2.6Ω. One can easily change the inductor value of the instrument on just inserting a soft iron core inside the bobbinXTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Torsion Of Rods Apparatus
INTRODUCTION:
A torsion test is quite instrumental in determining the value of modulus of rigidity of a metallic specimen. The value of modulus of rigidity can be found out thought observations made during the experiment by using the torsion equation.APPARATUS:
1. A torsion testing machine. 2. Twist meter for measuring angles of twist 3. A steel rule and Vernier Caliper or micrometer
Hall Probe
Ge single crystal with four spring-type pressure contacts is mounted on the printed circuit board. Four leads are provided for connections with measuring devices.A zero setting can be done by adjusting the spring contacts with the help of screw driver.
Specifications:
Material: Ge single crystal, n type
Resistivity: 8 – 10 ?-cm
Contacts: Spring type
Rear Axial Assembly With Differential Gear
Rear Axial Assembly With Differential Gear Fully Floating Type – Actual Cut Section
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Demountable Transformer
Description
This heavy duty demountable transformer can be used for the study of transformertheory and many other alternating current phenomena. This kit consists of: 1. A magnetic circuit made of highly permeable U shape metal sheet, which can be closed using two clamps with tightening screws. 2. Section: 40 x 40 mm with 150 mm length and 170 mm height. 3. One coil of 6000 turns with maximum current of 0.2 A. Intermediary coil of 2000 turns output. 4. One coil of 600 turns with maximum current of 2.5 A, which is mainly used to create the primary of transformer. 5. One coil of 1200 turns with maximum current of 1.25 A, fitted with intermediary 400 and 800 turns outputs. 6. One coil of 72 turns with maximum current of 12 A, fitted with intermediary 6, 30, 54 and 66 turns outputs. 7. Power supply cable.
Refrigeration Trainer Domestic Type
The unit enables students to study the various parameters affecting the performance of a domestic refrigerator. It consists of refrigeration cycle of domestic refrigerator, it consists a hermetically sealed compressor, air-cooled condenser, capillary tube and a natural convection type evaporator. The evaporator is fitted with a small heater to simulate different load conditions various measurements are provided so that power consumption, COP, theoretical and actual refrigerating effects refrigerant flow rate and effect of door opening on power consumption can be studied and also students can visualize automatic operation of unit using a thermostat.
