XTEMOS ELEMENT
AJAX PRODUCTS TABS
Suspension Bridge Apparatus
DESCRIPTION:
Cables are frequently used to support loads over large spans such as cable stayed for suspension bridges, cable car systems and stadium roof. They are used extensively for permanent guys on structures such as microwave towers and derricks. They are also used for temporary guys during erection. The only force in a cable is direct tension. They are too flexible to carry any moment. A cable is used to carry concentrated loads, uniformly distributed load along its length and uniformly distributed load along the horizontal span. It takes the shape of a polygon under concentrated loads, a catenary under uniform load along its length (such as its own weight), and a parabola under uniform load along the horizontal span.EXPERIMENT:
• Study the Extension of each spring Balance Left & Right Both. • Study of the effect of a point loadTECHNICAL SPECIFICATION:
• Apparatus Consists of two mild steel cables 0.5cm diameter in cross section and 150cm long, pinned to two supports 90cm apart situated symmetrically. • One of the ends can be converted to a roller by applying a known load at the end with the help of suspended pulley system. • Vertical loads can be applied at various points along the span of the beam. • A dial gauge with 25mm travel (with a magnetic base) is to be supplied with the apparatus complete with a supporting stand and a set of weights.
Light Dependent Resistor Unit (LDR)
Number Mat
Get kids to think on their feet! Number mat is fast and crazy quiz games make learning math fun!Kids listen the equation from teacher, do the math, and then step on the right answer. Play different games to reinforce numbers, counting, addition and subtraction up to the number 25. Great for classroom use. Mat measures 20 feet in length.
Stool Container
We export and trader high quality Stool Containers.
These containers, as the name suggests, are used for collecting stool samples.
These Stool Containers are manufactured from the high grade raw material for toughness and durability.
The cap is provided with a spoon like structure that proves helpful in lifting samples.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Stool Container 30 ml | 100 | |
| Stool Container 60 ml | 100 | |
| Stool Container 25 ml | 100 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Pregnancy Pelvis With Baby
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Instrumentation Amplifier
Instrumentation amplifier is a switched gain precision operation amplifier. This is used for precise and accurate, low noise differential signal acquisition. 4mm sockets are used for the input signal. It can be interfaced with a wide range of sensors. It can take small voltage changes from a sensor and make those changes large enough to be measured using CRO. It is not able to drive a low impedance load such as a loudspeaker or relay. The output can be read on CRO. Digital multimeter may also be used to read the output. With switched gain of 5 to 1000, it can handle signal inputs over a very wide range making it suitable for almost all applications.
Slotted Mas Set Iron
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Optech Scanner
Description
Optech ILRIS Laser Scanner is fully portable, laser based ranging and imaging system for the commercial survey, engineering, mining and industrial markets. A compact and highly integrated instrument with digital instrument with digital image capture and sophisticated software tools, ILRIS is an industrial leading solution that addresses the needs of commercial users.
Pulley Bench Clamp Fitting
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
8085 Microprocessor Trainer Kit
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery backup for RAM. • 21 Keys multi-function keyboard with double shot characters for long life. • 6 digit 7Segment RED LED Display. • 3 Channel 16 bit counter / timer terminated in a 10 Pin Connector. • 48 TTL I/O Lines, terminated at 26 pin FRC connector • RS232C Compatible serial Port terminated in a 9 Pin "D" Male Connector. • One VXT Bus (50 Pin FRC Connector) for interfacing VBMB series of Experiment boards and bus expansion. • Built-in SMPS Power Supply: Input : 230V AC, Output: +5V / 3.5A, +12V / 150mA. • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging. • This trainer helps to learn the characteristics of double acting cylinder namely direction, speed & force. • A Microcontroller ADC relay driver provided to actuate the cylinder. • Gear pump supplies the hydraulic fluid to double acting cylinder through direction control valve. • Pressure control valve controls the flow rate of fluid to cylinder. • Single phase induction motor drives the pump. • Control unit communicate with PC and controls the double acting cylinder using LabVIEWSoftwares. • Two proximity sensors are provided to indicate the position of the cylinder. • Load cell measures the force developed by the cylinder. • 5/2 Double Solenoid Valve directs the cylinder. • One tank is used to store the hydraulic fluid.
Measuring Tape
Description
Measuring tape is a flexible form of ruler. It consists of a ribbon of cloth, plastic, fiber glass, or metal strip with linear-measurement markings. It is a common measuring tool. Its flexibility allows for a measure of great length to be easily carried in pocket or tool kit and permits one to measure around curves or corners.
Construction of Parabola
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Young’s Moduluds Appratus
Comprises a scale plate carrying a 0 to 30 mm scale, and a moveable vernier readable to 0.1 mm.
Both have bars with clamping screws for the wires and hooks for the tension weight and loading masses.Supplied with clamp for fitting.
A tension weight, mass 1.3 kg approx. for the comparison wire is also included.
Complete with load masses and wires.
