XTEMOS ELEMENT
AJAX PRODUCTS TABS
Insect Display & Storage Showcase
Description
For pinning of insects on bottom. White Hardwood / Teakwood with glass in wooden frame on top & MDF sheet bottom is nicely polished. Bottom lined with 8 mm thick soft pinning, washable EVA Sheet. Inside glazed white. Raised wooden wall with holes for insecticide inside bottom to make box air tight and pest proof. Fitted with brass hinges, index card holder & clips. Size 53x45x9cm Size 45x30x6.5cm Size 38x25x6.5cm Size 30x23x6.5cm
Leak Test Apparatus (S.S BODY)
Ideal instrument to check blister Packs, Strip for Leak Test.
The old method of separate desiccator and the huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness.
The instrument is equipped with Diaphragm type vacuum pump gives the higher level of vacuum in shortest possible time.
Die pressed polycarbonate vacuum desiccator sustains vacuum for a long time.
A vacuum gauge is provided to indicate vacuum level which is connected to isolation valve to disconnect the source.
Thus avoiding the need of continues running of the vacuum pump.
| Body: | Stainless steel. 304 | |
| Desiccator: | SPolycarbonate, 8” Desicator Provided with Digital Timer | |
| Timer: | S3999 sec. Digital | |
| Vacuum Level: | S 22" Hg | |
| Current: | S 5A | |
| Voltage: | S 230 |
Telescopic Alidade
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Prism
Coriollis Component Of Acceleration
This set up is designed to study coriollis component of Acceleration of a slider crank Mechanism. The apparatus uses hydraulic analogy to represent the rotating slider. It consists of a rotating block with two arms in opposite direction. These tubes can be rotated at various speeds by using a swinging field motor, which also acts as a dynamometer to measure torque applied to rotating tubes. A Perspex window on top cover helps to visualize the process. Rotameter is used to measure water flow rate through tubes. Water is circulated by small monoblaock pump.
Specifications:
1.Main Tank with fiberglass lining. 2.Rotating Arms 9/6 mm dia, 300 mm long. 3.Motor – Swinging field, D.C., 0.5 HP. 4.Rotameter 5.Monoblock Pump 6.Control Panel comprising of – (i) Speed Control Unit. (ii) Speed Indicator. (iii) Necessary switches. 7.Rigid support frame.Range of Experiment:
Coriollis Component of Acceleration can be determined at various speeds of rotation and water flow rates.Service Required:
1.A.C. Single Phase .230 V. stabilized supply. 2.Floor Space -1.5 m X 1.5 m.
Car Chassis Rear Wheel Drive Actual Cut Section
Car Chassis Rear Wheel Drive Actual Cut Section – Motorised
4 Stroke 4 Cylinder Petrol Engine With Clutch, Gear Box, Propeller Shaft, & Rear Axle Assembly With Differential Gear
The chassis of the four stroke four cylinder engine cut section model. The cut section model is constructed such that all the following systems can be demonstrated in working conditions.
ENGINE
Maximum parts and accessories of an engine like cylinders, cylinder head, inlet and Exhaust manifolds, FIP, injectors, self-starter, alternator, water pump, radiator, etc., are sectioned to show the internal constructional details. The complete sectioned model is coupled with FHP 220/230V A.C single phase motor through a Reduction drive unit.TRANSMISSION SYSTEM:
This system consists of a Clutch and four speed gearbox assembly, the casing of which is suitably cut to demonstrate its operation. The gearbox is coupled to Differential gear box with propeller shaft and the different coupling used for this transmission can be demonstrated. The Differential gear box is also cut so as to clearly to demonstrate its complete operating principle. The gear shifting including the forward and reverse gear operation can be clearly shown. The speed variation and the rotation of the Differential gear box can be seen while gear shifting. By running the motor connected to the engine assembly the entire system with gear box, rear axle etc. can be demonstrated in running. FUEL SYSTEM: The Fuel tank is cut to expose the mounting of the level sensor and the position of Fuel section. The system is complete with mechanical Fuel pump. EXHAUST SYSTEM:It consists of Exhaust Manifold and silencer in cut section to explain internal construction. LUBRICATION SYSTEM: It consists of the engine Lubrication system along with the Lubrication oil pump is suitably sectioned. SUSPENSION SYSTEM: This will explain both the Hydraulic Suspension systems at the front and the leaf spring Suspension at the Rear. One of the hydraulic arrangements of Suspension mechanism is highlighted (with shock absorbers) and explained cut sectionally.BRAKING SYSTEM:
The Hydraulic or Air circuit Brakes. The movement of the Brake Shoes on operating the brake pedals can be seen in the area where the Brake drum is cut. The front and rear brakes will be operational. STEERING MECHANISM: The can be seen and included in the Steering wheel. Steering gear box and coupling of the same to the wheels will be shown by rotating the steering wheel, the operation of the steering system can be demonstrated. The entire system will be mounted on the chassis, and suitable mounting option with caster wheels will be provided for easy movability.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
2 Stroke 1 Cylinder Petrol Engine Manual Driven
The engine will be sectioned to show the internal constructional details. The working of individual part and accessories like Valves, Pistons, pumps, Crank and Camshaft, etc. will be demonstrated. It is provided with Flywheel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes. The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Carrier Tray
We offer high quality Carrier Tray to our valuable clients.
This autoclavable Polypropylene Tray has a handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.
These attributes have led to an increase in demand of our Carrier Trays.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Carrier Tray 380 x 240 x 115 mm | 6 |
Microscope Slide Set Basic
Set of 25, Microscope slides created
Biology syllabus with following subjects.
Supplied in Box.
Kidney TS
Allium root tip LS, mitosis
Kidney VS, injected
Allium root tip, squash
Squamous epithelium
Moss leaf, for cells (check cells)
Leaf epidermis
Human blood smear
Stem, TS, separate bundles
Artery and vein
Mucor, asexual
Monocot (Zea) root, TS
Lung through bronchiole VS
Hair insertion
Ovary VS
Testis TS
Spinal cord, TS
Pancreas
Leaf, TS
Stem, LS old
Dicot stem apex, LS
Lung injected
Lily anther, Tetrad
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Opthalmic Microscope
Specifications
Double focusing mechanism. Programmable multi-function footswitch. Electromagnetic locks. Suitable for all types of ophthalmic surgery. Space-saving design provides large working area. Easy illumination bulb exchange allows the spare lamp to be immediately rotated into position if the main lamp fails.| Magnification | : | 4.2x –21x | |
| Optics | : | Objective Lens | |
| : | F=200mm | ||
| Zoom | : | Continuous zoom |
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Burner Bunsen – Simple, LPG
4 Stroke 1 Cylinder Diesel Engine Motor Driven
The engine will be sectioned to show the internal constructional details. The working of individual part and accessories like Valves, Pistons, pumps, Crank and Camshaft, etc. will be demonstrated. It is provided with Flywheel and it is mounted on a sturdy iron frame. This actual cut section engine helps the student to understand about the parts and the working of the engine very easily. It is specially made dissectible for demonstration purposes. The actual cut section engine will be supplied with key card & very interesting literature regarding working.
Clinometer Compass
Description
Clinometer Handle Compass is a reproduction of an antique Clinometer compass. The Handle Compass gets its name from its "handle" shaped sight, which actually serves two purposes With the compass level, an object can be viewed through the peep sights to determine its magnetic heading. The second and most interesting purpose is when tilting the compass on its side and viewing an object through the sights, its angle of elevation or declination can be found. A weighted pendulous arm beneath the compass needle can be read from one of three scales : Angle in degrees beneath the zenith (from straight up), angle in degrees of elevation or declination, and in inches per yard of slope. The compass has a needle lift mechanism to protect the compass jewel and the pendulous arm when being transported.
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Insect Box with Stretching Strips
Description
Suitable for taking in field where the insects can be stretched on the spot and can securely be kept inside the box Teakwood frame with melamine lamination on top & MDF sheet bottom is nicely polished. Top & bottom lined with EVA sheet over which adjustable strips provided for stretching insects. Strips can be fixed at one place with fine screws and fly nuts. Fitted with brass hinges, index card holder, clips and handle. Size Approx. 43 x 30 x 11cm.
Gynecological Examination Model
Description
Gynecological Simulator is ideal for all aspects of gynecological education, training and competency evaluation, including the bimanual exam, speculum exam, and cytology sampling. Students will appreciate the unprecedented realism of its internal and external features, while instructors will love the interchangeable components that make up its unique modular system. This simulator allows you the flexibility of customizing your scenarios with use of included makeup, blood, and thickener. Additional specialized modules are also available (STD, post-menopause, S.A.N.E., and pre-puberty). Starter unit includes torso, normal genital pad, normal pelvic organ block with vagina and rectum, abdominal gel pad, fabric abdominal pad, abdominal overlay skin, seven uterus/cervix pieces (normal/normal with discharge option, retroverted/cervicitis, cancer/cancer, transparent IUD trainer, post-menopause/herpes, fibroids/polyp, early pregnancy), five detachable ovaries (normal, polycystic, small cyst, large adnexal mass), bladder insert, pelvic organ prolapse insert, baby powder, Injury Shades Makeup Wheel, Primary Colors Makeup Wheel blood mix, hydroxyethyl cellulose thickener, syringe, lubricant, instruction manual, and hard carry case.
IoT Based Real Time Applications
Specification:
• To check the imbalance and deflection of moving machinery used for measuring various mechanical vibration • By using high performance acceleration meter realize the repetitiveness and accurate measurement. • Velocity : 0.01 – 400.0mm/s RMS 0.001-16.00inch/s • Acceleration : 0.1 – 400m/s2 equivalent peak • : 0.3 – 1312ft/s • Displacement : 0.001 – 4.000mm.
Profile Projector 300mm Dia
Specifications
300mm dia 360 degree rotatable graduated screen with venire and 90 degree cross hair line providing high accuracy of linear and angular measurements, providing illumination of contour lamp 12V/100W and two surface (12v/35W) lamps, with three standard magnifications.
Standard Features:
| X-Y Bed Size | : | 150mm X 150mm, fitted with hard steel balls for X-Y movement | |
| Travel X-Y movement (Standard) | : | 50 X 50mm | |
| Micrometers (50mm Dia) | : | Zero Adjustable 25mm (L.C 0.01mm) | |
| Angular Measurement | : | Manual, 360 degree graduated ring with 1 minute venire | |
| Maximum size of object view | : | 28mm (dia) | |
| Max Working Distance | : | 65 mm | |
| Standard Magnifications | : | 10x, 20x & 50x |
Stereo Zoom Microscope
Specifications
| Magnification | : | 20x & 40x or 30x and 60x | |
| Eyepiece Lens | : | Wide Field 10x or 15x Paired Eyepiece | |
| Objective | : | 2x and 4x (Turret Type Revolving) | |
| Focusing | : | Vertical movement with rack & pinion, Tension control knob & stroke 50 mm | |
| Inclination | : | 45° | |
| Tube Rotation | : | 360° Rotatable, Removable |
