XTEMOS ELEMENT
AJAX PRODUCTS TABS
Optical Bench, Aluminium
Description
Bench has two steel rods, one of which is graduated in mm with heavy metal and supports with leveling screws with four metal slides which slide smoothly on the bench. Two of the slides have transverse motion arrangement. Complete with two lens holders and two object needles. Graduated to 1 m Graduated to 1.5 m
Inclined Plane with Angle Measurer
Wireless Connectivity Kit
A Powerful Wireless Connectivity board is designed based on Sitara AM335X Cortex-A8 for detailed and combined study of different Wireless Communications. All in one Wireless Kit contains GSM/GPRS, GPS-GLONASS SBAS (GAGAN), ZIGBEE, RFID, Bluetooth and Wifi on board modules. It supports Linux, WinCE and Android OS Packages which can be used to study different applications like GPS tracking, wireless home and industrial security system, SMS and ZigBee based home application and lighting control and many more.
Features
• TI Sitara AM3354: - ARM Cortex-A8 32-Bit RISC Microprocessor NEON SIMD Co-processor - SGX530 Graphics Engine • DDR3 RAM : 4 GB • NAND Flash : 4 GB • 7” TFT Display Interface • Touch panel (Resistive and Capacitive) interface • On board WLAN (802.11 b/g/n), Bluetooth (802.15) • USB 2.0 – Host, OTG • Serial Interface : UART, SPI, I2C • On board - 10/100MPPS Ethernet PHY • Audio : - Digital Microphone - Multichannel Audio Serial Port (McASP) • Analog to Digital Converter
Shell Tube Heat Exchanger Water To Water
Heat exchanger is the devices used to transfer the heat from one fluid to other. The shell and tube heat exchanger is two tube single pass heat exchanger. The hot fluid is hot water obtained from water heater. The coil fluid is cold water. The schematic flow arrangement is shown in figure. Hot water enters the lower side of end box, flows through the tubes in lower half of shell and comes to the other end of the shell. It reverses its direction, flows through tubes in upper half of the shell and leaves out. Cold water enters lower part of the shell passes over the tubes between the baffles and leaves out the shell through outlet at upper surface of shell.
SPECIFICATIONS:
1.Shell – 150NB, 750 m.m. long provided with end boxes. a.One end box with divider plate. b.25% cut baffles – 4 Nos. in the shell. 2.Tubes – 4.5mm I.D., 6.35mm O.D.,250 m.m. length copper tubes with triangular pitch. 3.Instantaneous water heater, 3 Kw capacity, to supply hot water. 4.Thermometer for measuring the water temperature. 5.Valves to control hot and cold water flow.SERVICES REQUIRED:
1.3 P H, AC supply 2.Floor space 1.5m. X 1m, 3.230V, 15A, AC supply with earthing connection. 4.Water supply at the rate of about 10 lit/min at constant heat.XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Constant Volume Air Thermometer
Description
A metal stand fitted with 0-100 cm x 1 mm vertical wooden scale and supporting a mercury reservoir sliding on a metal rod. An air thermometer bulb fitted to a bracket can be attached to the other rod at either of two positions. With U-shaped base. Complete with 1 meter rubber tubing to connect reservoir to the bulb. Supplied without mercury.
Air Conditioning Trainer General Cycle Type
The unit consists of ducting fitted with various air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is provided. Cooling circuit consists of a hermetic compressor; air cooled condenser, thermostatic expansion valve and evaporator (i.e. cooling coil). Measurements of various parameters Torn cooling cycle and heating cycle are provided and students can easily visualize and understand the basic principles of air conditioning.
SPECIFICATIONS:
1.Cooling circuits – It consists of: a) Hermetic compressor, having the capacity of 2/3 ton of refrigeration (approx.) using R-22 refrigerant. b) Rotameter for liquid refrigerant flow measurement. c) Pressure gauges for high and low pressure. d) Prescott (i.e. high and low pressure cut-out). e) Thermometers for temperature measurement at various points In the cycle. f) Energymeter for compressor input measurement. g) Condensate measuring arrangement. 2.Heating Circuit – Air heaters with input control provided with energymeter for input measurement. Maximum heating capacity 1 Kw. 3.Steam generator and injector for humidification of air. All above components are connected to a duct of size 200mm. X 200mm. in which airflow is generated by axial flow fan. 4.Anemometer for measurement of air velocity, (range 0-15 m/sec. Following experiments can be conducted on the unit a) Cooling of atmospheric air. b) Heating of atmospheric air. c) Humidification of atmospheric air. d) Dehumidification and heating of atmospheric air. (Cooling coil acts as dehumidifier at reduced airflow.)SERVICES REQUIRED:
1.440 V, 15 A, 3 Phase supply with earthing connection. 2.Floor space area about 3 m. X 2 m.
Tubes, Culture, Media, Round Bottom with Screw Cap and PTFE/Rubber Liner
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Force on a Conductor Balance
Description
To demonstrate that when a current is passed through a conductor in a magnetic field, it is subjected to attraction or repulsion depending upon the direction of current in it. The apparatus consists of a plastic base 160 x 140 mm on which two contact pillars are mounted. Each pillar is provided with an external circuit. A balanced beam is supported by the pillars on two bearings which form the fulcrum. Two screwed masses are provided in the beam system, one moving vertically for the adjustment of sensitivity and the other moving horizontally for the adjustment of the equilibrium position, when no current is flowing. Scale marked 0 to 75 x 1 mm, rider of 1 gm. weight with instruction manual.
Hand Stroboscope
Dissecting Microscope with Bull Lens
Specifications
Heavy stable round base, Focusing done by Rack & Pinion system, with stopper to limit the downward movement of the Eye piece towards stage. A adjustable holder is provided for moving magnifying lens over full area of the stage. It is easily replacable with Bull Eye Lens 80mm in dia. A plano concave mirror in fork mount for light reflection, sturdy removable hand rests and arrangement for inserting Black & white plate. Duly packed in wooden cabinet with the following optics:| Eye piece: | 10x & 15X and Bull Eye Lens 80mm dia. | |
| Stage size: | 100mm x 100mm |
Demonstration Dynamo
Description
This model uses the same basic assembly as the motor, but is mounted on a baseplate 230 x 90 mm approx. which also carries a hand-drive pulley 120mm. diameter coupled to the smaller dynamo pulley by a rubber belt to give a step-up ration. Electrical output is via a pair of 4mm sockets. The model may also be used as a motor on a 6-8 V D.C. supply.XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Set of Masses, Brass
Set comprises masses of brass with slots, brass hangers with hook. Fine finish, masses removable and replaceable on hanger.
Set of 9 weights, one hanger each of 10 gm. Total weight 100 gm.
Set of 9 weights, one hanger each of 25 gm. Total weight 250gm.
Set of 4 weights, one hanger each of 50 gm. Total weight 250gm.
Set of 9 weights, one hanger each of 100gm. Total weight 1000gm.
Set of one hanger 20 gm. three weights 20 gm. Total weight 100gm.
Set of one hanger 50 gm, nine weights 20 gm. One weight 10 gm. and two weights 5 gm. Total 250 gm.
Spare slotted weights and Hangers 5gm., 10gm., 20gm., 50gm., and 100 gm. are also available.
CNC Lathe Trainer2
CONTROLLER:
SIEMENS / FANUC Main Spindle Drive : AC Motor with VFC Z and X Drives : Stepper drive with Servo Motor Input to Servo : Optically lsolated Motor Drive : Smart & Intelligent Run Speed Control : Through Controller Interpolation : Linear/Circular /parabolic Cycles Used : G, M, S, T, F, I, K, M, F, Circular interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuit and over Temperature Protected, Single Phase Protection Real Time Toolpath Simulation : ProvidedMACHINE DETAILS:
Center Height : 150mm Swing over Carriage : 125mm Distance between Centre : 825mm Weight : 1100kg Dimension in mm : 2000 x 1200 x 1700 Rapid Travel : 5000mm/min Resolution Z Axis : 1 micron Resolution X Axis : 1 micron (Dia.) Automatic Lubrication : Provided Tool Changer : Automatic – 4 station SPINDLE Spindle Speed : Continuous Variable Spindle power : 3 HP Inside Taper : MT4 Speed Range : 50 to 1800 RPMAXIS TRAVEL:
X Axos : 120mm Z Axis : 800mm
Ray Box
Description
To provide a simple means of producing single or multiple rays of light for use in elementary optics. Made of die-cast alloy, the ray box has an open front and vertical internal grooves to accommodate a slit plate and a cylindrical lens. Supplied complete with a metal plate having single and triple slits, a 12 V 24 W SBC line filament lamp and a lamp holder.XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Dissecting Trays
Opthalmic Microscope
Specifications
Double focusing mechanism. Programmable multi-function footswitch. Electromagnetic locks. Suitable for all types of ophthalmic surgery. Space-saving design provides large working area. Easy illumination bulb exchange allows the spare lamp to be immediately rotated into position if the main lamp fails.| Magnification | : | 4.2x –21x | |
| Optics | : | Objective Lens | |
| : | F=200mm | ||
| Zoom | : | Continuous zoom |
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Power Steering Trainer System Actual Working
Power Steering Trainer System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
Prospector Tilting Level
Description
Size 178 mm /7 Internal focusing, anti reflection coated optics with tilting arrangement and Fitted with revolving horizontal circle graduated to read 6 minutes with vernier and a provision to preset zero degree quickly. The tilting drum is graduated to read 1 : 5000 is incorporated for fine adjustment and accuracy. Supplied with accessories and adjusting tools Packed in PVC Plastic box with Aluminium telescopic stand in carrying canvas cover.
Flexible AC Transmission Systems
Three phase FACTS help the students to get insight of FACTS operation in Realtime by enhancing their understandings through various experiments. This module can be used to analyze the effect of shunt compensation (STATCOM- STATIC Compensator) series Compensation (SSSC - Static Synchronous Series Compensator) and Series - Shunt Compensation (UPFC - Unified Power Flow Controller) in the transmission line.
