XTEMOS ELEMENT
AJAX PRODUCTS TABS
Crystal Model Set
We offer Crystal Model Set to the esteemed clients.
The Crystal Model Sets contain different colored jacks (Red, Black & White) & connectors (long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.
Material : Polyethylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Crystal Model Set - Diamond | 1 | |
| Crystal Model Set - Sodium Chloride | 1 | |
| Crystal Model Set - Graphite | 1 |
Sonometer 3-Wire
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Block Calorimeter
ZigBee Debugger/Dongle
Gas Turbine/Turbojet Engine
XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Sonometer 3-Wire
Description :-
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched.
To one wire is fitted a spring balance reading to 100 N x 5 N and its tension can be adjusted by a winged nut and measured.
Another wire passes over a pulley and can be loaded as desired.
A third wire, for comparison, can have its tension adjusted by a wrest-pin.
With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
Laboratory Stirrers
We offer comprehensive range of Laboratory Stirrers for our esteemed clients.
Made of polypropylene, these Laboratory Stirrers are very useful for stirring different solutions in the laboratory.
Our range of Laboratory Stirrers proves to be tough and long lasting.
Our buyers can avail these Laboratory Stirrers at highly affordable price range.
| Particulars | Pack (Pcs) | |
|---|---|---|
| Stirrer Ø-10 mm x h-250 mm | 12 | |
| Stirrer Ø-6 mm x h-150 mm | 12 | |
| Stirrer Ø-7 mm x h-200 mm | 12 | |
| Stirrer Ø-7 mm x h-250 mm | 12 | |
| Stirrer Ø-7 mm x h-300 mm | 12 |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Abney Level
Description
The Hand Level is a small, economical level for use with preliminary surveys to determine traveller way or cable way steel work elevations and other feasibility type site reconnaissance work. The Abney Level is very similar to a clinometer in that it is used to measure the value of a slope by means of arc measure and grade percentage.Specification of Abney Level
• Used to determine slope angle, tree heights etc • Graduated 0-+/-90 degrees, 0-+/-100% on a stationary arc • Vernier reads to 10 • Scale pointer incorporates friction thumb lock • Includes carry case
Burner Bunsen, LPG
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Line Shaft Unit
Description
For showing the conversion from electrical energy via mechanical, to potential energy by winding up a weight on a cord. One end of the 6mm. steel shaft carries an aluminium 'V' pulley 56 mm. diameter, and the other end is fitted with a cord anchoring collar. Supplied complete with driving belt.
Dissecting Microscope with Bull Lens
Specifications
Heavy stable round base, Focusing done by Rack & Pinion system, with stopper to limit the downward movement of the Eye piece towards stage. A adjustable holder is provided for moving magnifying lens over full area of the stage. It is easily replacable with Bull Eye Lens 80mm in dia. A plano concave mirror in fork mount for light reflection, sturdy removable hand rests and arrangement for inserting Black & white plate. Duly packed in wooden cabinet with the following optics:| Eye piece: | 10x & 15X and Bull Eye Lens 80mm dia. | |
| Stage size: | 100mm x 100mm |
Balance Weights
Endocrine Glands
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
CONDUCTIVITY METER
PRODUCT DESCRIPTION
All aqueous solutions conduct electricity to some degree. The measure of a solution's ability to conduct electricity is called "conductance" and is the reciprocal of resistivity (resistance). Adding electrolytes such as salts, acids or bases to pure water increases conductance (and decreases resistivity)
Conductivity Meter – Bench Top
Features:- Highly Stable & Accurate
- Cell Constant Adjustment Facility
- 3½ Digit Display
- Available in Laboratory & Field Models
- Automatic Temperature Compensation Facility
- Max Make, Table Pattern 6
- Pen Type (TDS/EC) Imported
- E.I Make, Model Alpha 06
Complete Optical Bench Set
Description
The Complete Optical Bench Set is an economical alternative to conventional optical benches that provides accurate demonstrations of basic optics principles. The complete system includes: 1. Optical bench-double-sided meter stick. 2. One Object and Marker. 3. One Screen support. 4. One Candle holder. 5. One Pair of metal supports. 6. Two Lens supports 4 cm and 7.5 cm. 7. Five White board screens, each 10 x 12.5 cm with a millimeter scale along one side. 8. 12 paraffin candles.
Balance Compression
5000g capacity with 25g subdivisions
Zero adjustment knob
Includes: (1) Balance
Balance Compression, Capacity 5 Kgs.
(1) Balance
Useful for weighing chemicals and general purposes. Made of plastic body with wide view dial and easily readable scale.
Most durable and provided with zero adjustment knob.
Cap : 5kg Sub division : 25g
CNC Lathe Trainer1
CONTROLLER:
Type of control system: PLC based system Main Spindle Drive : AC Motor with VFD Z and X Drives : Stepper drive with RAMP function Input to Stepper Motor : Optically Isolated Motor Drive :TTL Compatible Run Speed Control : Computer controlled through software Interpolation : Linear / Circular / Parabolic Cycles Used :G,M,S,T,F,I,K,M,F Cycles : Circular Interpolation / Canned Threading : Straight / Taper Power Devices : Short Circuits and over Temperature Protected Real Time Tool Path Simulation : ProvidedMACHINE DETAILS:
Center height : 100mm Swing over Carriage : 80mm Distance between Centre : 250mm Longitudinal Travel : 250mm Weight : 350 kg Dimension in mm : 1100 x 750 x 1700 Rapid Travel : 500mm/min Resolution X & Z Axis : 10micron Dt. Motor Power : 40V – 4A Lubrication : ManualSPINDLE:
Spindle Speed : Continuous Variable Spindle Power : 1.5 HP Inside Taper : MT3 Speed Range : 100 to 3000 RPM
Tray Dryer
| Design | Standard, Customized | |
| Capacity | 96 trays | |
| Automatic Grade | Automatic, Semi-Automatic | |
| Max Temperature | 250 degree C |
| Chamber Size (HxWxD) | Tray Capacity mm Inches | |
|---|---|---|
| 430x840x650 8Tray | 16”x32”x 1 1/4 | |
| 430x840x910 12Tray | 16”x32”x 1 1/4 | |
| 910x840x910 24Tray | 16”x32”x 1 1/4 | |
| 960x1270x1450 45Tray | 16”x32”x 1 1/4 | |
| 960x1700x1700 96Tray | 16”x32”x 1 1/4 |
Optional
Timer 0-24 hours. Digital temp. Indicator-cum-controller. Tray 16”x32”x 1 1/4 size.
