XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Balance

Basic general purpose balance for students. The hangers have double hooks for specific gravity experiments, and pans are detachable. The balance is finished in black colour with chrome plated fittings and mounted on polished wooden base with leveling screws.

Transducer Trainer

Specification

• RTD acts as a temperature sensor • Strain gauge based load cell • Linear variable resistive transducer • LDR, Photo diode, photo transistor • Precision servo potentiometer • Inductive type proximity sensor • Heat source, Filament lamp, Buzzer • 3½ digit LED display • Analog type 10V Center-Zero meter • Inverting and Non-inverting amplifier • Amplifier with Gain and offset control • Instrumentation and summing amplifier • Low pass filter • Precision Rectifier • Timer and buzzer oscillator • Electric switch

Lens, Double Convex, Spherical

Description

Clear glass, ground edges

Focal length Power Add To Enquiry
25 mm 100 mm +10D
25 mm 150 mm +6.6D
38 mm 50 mm +20D
38 mm 100 mm +10D
38 mm 150 mm +6.6D
38 mm 200 mm +5D
38 mm 250 mm +4D
38 mm 300 mm +3.3D
38 mm 500 mm +2D
38 mm 1000 mm +1D
50 mm 50 mm +20D
50 mm 100 mm +10D
50 mm 150 mm +6.6D
50 mm 200 mm +5D
50 mm 250 mm +4D
50 mm 300 mm +3.3D
50 mm 500 mm +2D
50 mm 1000 mm +1D
60 mm 100 mm +10D
60 mm 200 mm +5D
60 mm 300 mm +3.3D
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Rotary Pipette Stand

Moulded in Polypropylene, the unique Rotary Pipette Stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms that cradle the pipette tips protectively and permit water drops to run off. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. Our Rotary Pipette Stand can be easily disassembled and reassembled.
ParticularsPack (Pcs) 
Pipette Stand (Rotary) - For 94 pipettes1 
Pipette Box4 

Air Condensers (300mm)

Plain Without Joint
With Joint (B-19 or B-24) Any One

3Ø – 3Ø Matrix Converter

FEATURES:

• 9 No. Bi-directional Switch with IGBT and Fast Diode Bridge,Rating@1200V 50A Forms 3 Phase to 3 phase Matrix Converter Power Circuit • Output of Matrix Converter Terminated by Banana Connector in the Front Panel • 9 No. High Speed Opto- IC Provided for Gate PWM Isolation. • 9 No. Single Channel IGBT Driver IC with Current Limiting Facility Provided for IGBT Gate Driving. • 9 No. 15V DC Power Supply Provided Internally for Control Circuit. • 3 No. Inductor and AC Capacitor Provided for Three Phase Input Filter. • One No Three Phase Synchronizing Transformer (230/9V) Provided for three Phase Supply Synchronization • 6 nos Hall-effect Current Sensor with Signal Conditioning Circuit Provided for Output and Input Current Measurement and Protection. • AC voltmeter is provided for measure the input AC voltage. • +/- 15V DC Internally Provided for Sensor Signal Conditioner Circuits. • MCB Provided for Input power ON/OFF and OL Protection ON/OFF Switch. • Test points are provided on the front panel to measure the voltage, current and PWM signals • 34 pin FRC Connector Provided for IGBT Gate PWM Inputs. • Input : Three Phase 440V AC, 50 Hz. • Output : Three Phase Variable Voltage, variable frequency • Rating : Suitable for 1 HP 3Ø AC Induction Motor

Carburetors Actual Cut Section

This model helps the student to understand the working of carburetor very easily. It is specially made dissectible for demonstration purposes. (A) Mikuni Car Type (B) Solex Type (C) Scooter Type (D) Motor Cycle Type
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

Dental Care Model (32 Teeth), PVC

This model is to serve for demonstration in mouth protection and relative clinical teaching. Consists of gum, teeth, tongue and palate. It demonstrates teeth form and oral cavity cleaning and protection. 32 teeth.

PCR Tube Rack

We are one of the prime Exporters and Traders of PCR Tube Rack . Used for keeping PCR Tubes, Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. PCR Tube Rack facilitates the use of multipipetters. A number of racks can be stacked together to save shelf space. Material : Polycarbonate / Polypropylene
ParticularsPack (Pcs) 
PCR Tube Rack (Rack for 96 PCR Tubes of 0.2 ml4 

Buchner Funnel

Moulded in Polypropylene, our Buchner Funnel are highly sought after funnels in the market. These two piece Buchner Funnel are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of top portion has a perforated filter plate. Material : Polypropylene
ParticularsPack (Pcs) 
Buchner Funnel 70 mm12 
Buchner Funnel 110 mm6 
Buchner Funnel 90 mm12 
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Digital Bomb Calorimeter

DIGITAL BOMB CALORIMETER

Bomb Calorimeter outfit provides a simple and inexpensive method for determination of heat of combustion of organic matter and the calorific value and sulphur content of solid and liquid fuel. The outfit supplied is complete for analysis as per the method recommended by British Standard Institution BS 1016. All parts of the outfit have been finished of petroleum and British Standard Institute.

SUPPLIED WITH

Calorimeter Vessel with bomb support, Water jacket, Combined Lid for calorimeter vessel and water jacket, Stirrer, Connecting Leads, Connecting tube to connect bomb & pressure gauge, Connecting tube with fine adjustment valve, to connect pressure gauge, pressure gauge on stand, Spanner for oxygen tube connection, Ignition Wire, (2 meters) Nichrome, Cotton Real, stand for bomb lid, Hook for lifting bomb, stainless steel Crucible, Gelatine capsules, Gas release valve, Bomb firing unit, Vibrator, Timer, Benzonic acids. ‘O’ Ring Big, ‘O’ Ring Small, ‘O’ Ring for Stirrer Valve for Bomb, Valve Kay. Complete with Instruction manual.

Model of Uterus And Ovaries

Description

Internal structure of human female reproductive system displayed in approximately 3 times life size. Shows Vagina, Cervix, Uterus, Fallopian tubes and Ovaries. One ovary is cut away to egg development. Mounted on base with key card

Thermocouple, Double

Description

Copper-constantan-copper to form hot and cold junctions. Length of soldered junctions is about 38 mm The coiled lead is about 50 mm long

Continuously Variable Transmission

Continuously Variable Transmission – Actual Cut Section The working of CVT is shown with the help of actual parts assembled on square iron pipe frame. The CVT is driven through permanent magnet D.C. motor with variable speed control drive. RPM Sensor With Digital Display Is Also Provided. All the necessary parts of CVT are shown in actual working form. This model helps the student to understand the working of the CVT very easily. It is specially made dissectible for demonstration purposes.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Block Acrylic, Semi-Circular

Description

Sizes :

90 mm diameter x 16 mm thick 75 mm diameter x 20 mm thick

Spring Unit of Mechanical Model

Description

For showing potential energy in a wound-up spring and its conversion to electrical energy by driving a dynamo and lighting a lamp. May also be used to wind up a weight on a cord showing the change from potential energy to kinetic and back to potential in the raised weight. The steel shaft carries a clock spring with a free wheel device and winding ratchet, also an aluminium 'V' pulley 56 mm. diameter. One end of the shaft overhangs the base for use as line shaft when winding up a weight. Dimensions 220 x 100 x 100 mm. high Supplied complete with driving belt.
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture