XTEMOS ELEMENT
AJAX PRODUCTS TABS
Monocot Root T.S.
CRUCIBLE TONG (STAINLESS STEEL)
Transformer and Stand For Sodium Lamp
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE

Ruhmkorff Coil
Description
Ruhmkorff Coil produces pulses of high voltage spark from low voltage DC source (6 – 12 V DC). It is suitable for use with gas-filled discharge tubes, vacuum tubes, eudiometers and for general laboratory work. Includes an adjustable vibrator system, primary current polarity reversal, on-off switch, a capacitor enclosed in the box and special alloy contacts. Spark gap at the discharge points can be adjusted by sliding rods back and forth. Spark Length 15 mm.Front Axel Assembly With Differential Gear
Front Axel Assembly With Differential Gear (Actual Cut Section)
The working of differential gear is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of differential gear are shown in actual working form. This model helps the student to understand the working of the differential gear very easily. It is specially made dissectible for demonstration purposes.
Microtome Razor
Optical Bench, wooden
Description
A wooden base board with one meter scale divided into mm with following accessories: One each White face object and receiving screens each 150 x 100 mm with aperture mounted on wooden base with an index mark. Two plane mirrors 150 x 100 mm mounted as above. One lens holder V shaped, wooden. One needle vertically mounted in a short wooden rod on base. One candle holder on base. The components have the same optical center height.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Fully Automatic Battery Charger
Tuning Fork Activator
Material Kit Solids
Economy Kit of 14 materials blocks.
This economy kit consist fourteen materials in the form of rectangular blocks, intended to familiarize the student with the appearance, 'feel', texture, hardness and density of a range of common substances.
Blocks, 50 x 40 x 30 mm. Wood, paraffin wax, aluminium, Iron, foamed polystyrene.
Blocks, 20 x 20 x 100 mm. Perspex, glass, slate, aluminium, softwood, Marble.
Blocks other sizes: Lead 50 x 50 x 20 mm
Brass 20 x 20 x 50 mm
Iron 40 x 40 x 20 mm
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION

Kipps Apparatus
Kipp's Apparatus, made of Polyethylene has three main portions.
The top portion is fitted with thistle funnel and a bulb structure through which dilute acid can be poured, which reacts with a metal sulphide in the base of the apparatus.
H.S gas then evolved collects in the fitted with a self-lubricating PTFE plug.
The base is provided with a residual outlet fitted with a cap for easy cleaning.
Material : High Density Polyethylene
Particulars | Pack (Pcs) | |
---|---|---|
Kipp's Apparatus 250 ml | 1 | |
Kipp's Apparatus 500 ml | 1 | |
Kipp's Apparatus 1000 ml | 1 |
Human Placenta
Male Catheterization Training Simulator
Description
Catheterization Trainer Simulator trainer, male bladder catheterization procedures can be realistically demonstrated, practiced and assessed. The genital inserts are placed into the anatomically correct lower abdominal model and held in place with magnets.The material is soft and flexible:
the foreskin is movable and the penis can be stretched. This way the student can practice all the necessary gestures for catheterization (e.g. disinfection). The material gives a realistic feeling when inserting and removing the catheter into the bladder with realistic resistance and insertion depths.Direct learning:
When the catheter has been correctly inserted, fluid runs out, just like with a real patient. The catheter can also be checked through the transparent bladder. The abdominal wall can be removed so that the process can be viewed better.Various levels of difficulty:
On the male insert, three different levels of prostate narrowing can be set. In the narrowest case, the student can feel that catheterization is no longer possible through the urethra and that a suprapubic catheter will have to be inserted. A suprapubic catheter has already been put in place and the student can practice cleaning it and taking care of it with the trainer.All the benefits of the male catheterization simulator at a glance:
Male catheterization with realistic resistance 3 levels of adjustable prostate narrowing soft and movable foreskin (for practicing disinfection, for example) Anatomically realistic pelvic structure Liquid outflow if catheterization is successfully carried out The transparent bladder can be checked and the abdominal wall can be removed Includes suprapubic catheter for practicing, cleaning and caring for it. Stands securely on the table thanks to the non-slip feet Magnetic connectors for quick set-up and dismantling Easy to clean and maintain, and can be completely taken apart A sponge on the inside prevents a build-up of moisture.Microcontroller Based Distance Impedance Relay Trainer
It consists of many components i. Transmission line module ii. Voltage and current signal conditioners iii.Distance Relay iv. Multifunction Meters
Transmission Line Module
• Total line length - 180Km • Modeled by RL - parameters • Current rating - max 5A • Voltage rating - max 250V ACVoltage and Current Signal Conditioners
• One no of 5A/5V current transformer is provided to read the relay current input • One no of 230V/9V potential transformer is provided to read the relay voltage inputDistance Relay
• One PIC microcontroller used as processor to activate the relay function • One LCD to indicate : - Impedance set value - Current & voltage value - Set time, Relay tripping time • Four numbers of keys are used • Parameters - Current input : 0-5Amps, Voltage input : 0-230V AC - Number of contact: One number of NO contact @ 220V, 10Amp rating - Auxillary supply : 230V AC, 50HzMultifunction Meter
• One MFM provided for measuring input side all parameters (V, I, PF, F, AVR, KW) • One MFM provided for measuring load side line parametersXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Hydraulic Drum Brake Actual Working Two Drum
Impact Of Jet On Vanes Apparatus
DESCRIPTION:-
The Set-up consists of two sided clear fabrication. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured by adding the weights supplied to the weight pan until the mark on the weight pan corresponds with the level gauge. A total of two targets are provided a flat plat and a hemispherical cup.EXPERIMENTS:-
Ø To measure the force developed by a jet of water impinging upon a different targets (Hemispherical & Flat Plate) and comparison with the forces predicted by the momentum theory.UTILITIES REQUIRED: –
Ø Water Supply & Drain Ø Electricity Supply: Single Phase, 220 VAC, 0.5 kWTECHNICAL SPECIFICATION: –
Ø Test Plates : Material Brass (2 Nos.) 1. Flat Plate 2. Hemispherical Cup Ø Nozzle : Material Brass Ø Stainless Steel Chamber : Having of opposite sides made of glass Ø Water Circulation : FHP Pump, Crompton / Sharp make Ø Flow Measurement : Using Measuring Tank with Piezometer,Capacity 40 Ltrs. Ø Sump Tank : Capacity 60 Ltrs. Ø Stop Watch : Electronic Ø Control Panel : On / Off Switch, Mains Indicator etc. Ø The whole Set-up is well designed and arranged in a good quality painted StructureN-P-N Transistor Unit
Hand Microtome for cutting
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT