XTEMOS ELEMENT

AJAX PRODUCTS TABS

Featured
  • Featured
  • Accessories
  • Furniture

Burette Stand Wooden,Double

Description

For two burettes, Made of seasoned hardwood, polished, with clamping screws. Rods are approx. 460 x 16 mm. Double base size 290 x 100 mm

Specifications:

Length : (in) 22.4 Width : (in) 6.7

Sieve Shaker (Gyratory Motion)

Ensuring durability during performance, this machine is made of mild steel and cast iron and comes with one Lid and a Pan. This unit is used with up to 7 sieves of 150mm or 200mm (8 Inch) sieves and up to 6 sieves of 300 mm (12 Inch). Heavy duty motor (1/4 HP) ensures the whole performance through a reduction gear immersed in oil. Along with featuring gyratory motion, this units also performs upward and downward movement ensuring that each "square cm" of the sieve is fully utilized. This Gyratory Sieve Machine also supplied with a pair of rods and a holder which ensures tight grip of sieve set from the top.
Product:Gyratory Sieve Shaker 
Capacity:7 sieves of 150mm, 6 sieves of 300mm 
Design:Table Top 
Construction: Cast Iron, Painted Mild steel 
Motor: ¼ HP 
Timer: 0 - 60 Minutes 
Timer Type: Digital / Analog 
Power Supply: 220 Volts 

Advanced Nursing &Wound Care Manikins

Description

This Advanced Nursing and Wound care model is a full-body lifelike manikin, which is specifically designed for professional nursing training. This high quality manikin will provide a wide range of possible exercises including both first aid and emergency situations.

NURSING SKILLS

Head care: hair washing, face washing. Irrigation of the eyes and ears. Oral cavity care. Oral cavity and nasal cavity intubation. Oxygen inhaling. Oral and nasal feeding. Lavage. Organs structure of thorax. Venipuncture and injection, transfusion. Deltoid injection. Puncture of thorax, abdominal cavity, liver, medulla and lumbar. Enema. Urethral Catheterization for male and female. Irrigation of bladder for male and female. Ostomy irrigation. Gluteus injection. Organs structure of abdominal cavity. General care, bed bathes, dressing and undressing19. Wound care: disinfection, dressing change, binding, hemostasia. Trauma parts; The suturing care for the wound on the chest wall. The suturing care for the wound on the abdomen. The suturing care for the wound on the thigh. The care for the bruise of the skin of thigh. The care for the infectious ulceration. The care for the foot gangrene. Wound of forearm amputation. Wound of calf amputation.
XTEMOS ELEMENT

AJAX PRODUCTS TABS SIMPLE

shirt-tab
Fashion
Featured
  • Featured
  • Man
  • Woman

Rear Suspension System

In this model the working of rear suspension system is shown with the help of actual parts assembled on a metal stand. All the necessary parts of a rear suspension system are shown in actual working form. This model helps the student to understand the working of the rear suspension system very easily. It is specially made dissectible for demonstration purposes. (A) Leaf Spring Type Suspension System With Rear Rigid Axle (B) Rear Independent Type Suspension System

Internally Expanding Mechanical Drum Brake System

The model consists of a brake drum, two shoes are pivoted on pins. Braking action can be seen due to application of the force on the cam-lever.

Hydraulic Drum Brake Actual Working Single Drum

Suitably sectionised full size unit. Consisting of original parts such as :- master cylinder assembly, wheel cylinder, brake shoes, brake drums and necessary connections. Completed with operating lever and mounted on heavy iron stand.

Calorimeter, Joule’s

Description

Nickel plated copper calorimeter of 50 x 75 mm lagged and enclosed in an outer vessel of 75 x 100 mm size, with cover having terminals, a heating coil suitable for 3 – 6 V supply and holes for thermometer and stirrer. With stirrer but without thermometer.
XTEMOS ELEMENT

AJAX PRODUCTS TABS ALTERNATIVE

Fashion
Featured
  • Featured
  • Man
  • Woman

CNC Mill Trainer1

CONTROLLER:

Type of Controller System : PLC based system under collaboration from tudor,uk Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive TTL Compatible Input to Stepper :Optically lsolated , motor drive TTL Compatible Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided with Std Codes Real time tool path :with online 3D simulation

TABLE:

Length x Width : 600 x 225 (approx.) Clamping Area : 450 x 160 (approx.) T Slots : 10mm slot width.

MACHINE DETAILS:

Resolution : 5 micron(Standard) Distance from sindle :25-225mm(Nose to table top) Centerline to column :170mm Rapid Travel 700 mm/min Weight in kg : 950kg Dimension in mm : 1200 x 1200 x 1900 mm

SPINDLE:

Spindle Speed : Continuous Variable Spindle power : 1.5 HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM

Magdeburg Hemispheres

Magdeburg Hemispheres Made of cast iron. diameter 75mm approx. with stopcock and handles.

Placentation

Axile Placentation Basal Placentation Free Central Placentatson Marginal Placentation Parietal Placentation Superficial Placentation

Histology Set II

Set of 24 slides consisting of
Adrenal glandAreolar tissue
CereburmColon
Compact bone, LSHeart, entire LS
Human plantar skinHyaline cartilage
Kidney, LSLiver, injected
Lung, LS triple stainLymph node
Olfactory epitheliumOviduct
PenisPeripheral nerve
Pituitary, V.LSSperm Smear
Striated muscle, TSThyroid gland
ToothTrachea
UretervWhite Fibre-Cartilage
XTEMOS ELEMENT

AJAX PRODUCTS TABS ARROWS PAGINATION

shirt-tab
Electronics
Featured
  • Featured
  • Mobile
  • Smartwatches

Thermocouple Calibration Test Rig

The Unit helps in calibrating given thermocouple for the range 0°C to 100°C. While calibrating, thermocouple is once dipped in ice for 0Q C and then in boiling water for 100°C. This is done till the thermocouple shows the actual temperature of ice (0° C) and boiling wafer (100°C) and a linear calibration is set. A mV meter is provided to know the corresponding voltage.

SPECIFICATIONS:

1.A digital mV Meter and a digital temperature indicator with 2 different type of thermocouples. 2.A water container with heater of 1 KW. 3.A technical manual accompanies the unit.

SERVICES REQUIRED:

1.Table surface area – 2 m X 1 m X 0.5 m height. 2.220V, 50hz. Stabilize Electric Power Supply. 3.Ice cubes – 0.5Kg. Approx.

Solenoid

Description

This solenoid is used to generate a variable magnetic field and hence verify the relationship between magnetic field, current, number of windings and length of solenoid.

Worm Sector Type Steering System

Worm & Sector Type Steering System – Actual Working The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.

Small Dental Care Model (32 Teeth) PVC

This model is to serve for demonstration in mouth protection and relative clinical teaching. Consists of gum, teeth, tongue and palate. It demonstrates teeth form and oral cavity cleaning and protection. With tooth brush. Size: 11.3x17x10cm.
XTEMOS ELEMENT

AJAX PRODUCTS TABS WITH ICONS

Furniture
  • Furniture
  • Lighting
  • Accessories
  • Clocks
  • Cooking

Laboratory Timer

This is a versatile timer quartz crystal controlled for very high accuracy. which can be used for conducting experiments related to timing and motion with high accuracy. Can be used for G by free fall liner air tracks, dynamic trolleys etc. This timer has an in built power supply for the coil for G by free fall apparatus and lamps for photo gates. Range : 0.001, 0.01, 0.1 Sec. The above timer has a built in power source for photo gates and the coil for 'G' by free fall apparatus.

Set of Springs

Closely wounded Steel extension springs with loops at both sides, dia 6 mm approx. Closely wound with loops at both sides, dia. 6 mm approx. wire of 19 swg. Length 150 mm, Extension 230 mm average for 200g load

Metal Rivets, Brass

Description

Supplied as rivets. Pk of 500gms. Brass,lead,aluminium,iron, For specific heat capacity experiments. Supplied as rivets. Packets of 500 grams.300 mm long x 3 mm dia. Supplied in packets of ten rods. Copper,iron,lead,aluminium,brass 300 mm long x 3 mm dia. Supplied in packets of ten rods.

Laboratory Spatula

Acquire from us high quality Laboratory Spatula at affordable price range. Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.
ParticularsPack (Pcs) 
Spatula 150 mm12 
Spatula 200 mm12 
XTEMOS ELEMENT

AJAX PRODUCTS TABS LOAD MORE PAGINATION

Featured
  • Featured
  • Lighting
  • Accessories

SILICA CRUCIBLE WITHOUT LID

PRODUCT DESCRIPTION
  • Crucible is glazed inside and outside.
  • Highly resistant to alkalis and hot temperatures
  • 50ml capacity
  • Outside diameter 55mm, 42mm height
  • No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML

SILICA CRUCIBLE TALL FORM Without Lid, Translucent

PRODUCT DESCRIPTION -Without lid, translucent, glazed - Ordinary type lids to be purchased separately Size/ dimension:
  • 20ml,  Dia. 35mm x Ht. 38mm
  • 30ml, Dia. 43mm x Ht. 38mm
  • 50ml, Dia. 51mm x Ht. 51mm

SILICA MUFFLE TRAYS (For VM Crucible)

PRODUCT DESCRIPTION:   Available in 2types:  Two Hole, 39mm Length Four Hole, 76mm Length
XTEMOS ELEMENT

AJAX PRODUCTS TABS CAROUSEL

Featured
  • Featured
  • Cooking
  • Furniture