XTEMOS ELEMENT
AJAX PRODUCTS TABS
Mirror, with Base
Balance Weights
Polished brass, supplied with wooden block, as illustrated.
• Capacity 500 gm. Comprising 1x200 gm, 2x100gm, 1x50gm, 1x20gm, 2x10gm, 1x5 gm, 2x2 gm, 1x1 gm
• Capacity 1000 gm. Comprising 1x500 gm, 1x200 gm, 2x100 gm, 1x50 gm, 1x20 gm, 2x10 gm, 1x5 gm, 2x2 gm, 1x1 gm.
• Capacity 2000 gm. Comprising 1x1000 gm, 1x500gm, 1x200gm, 2x100gm, 1x50gm, 1x20gm, 2x10gm, 1x5gm, 2x2gm, 2x2gm, 1x1gm.
Planck’s Constant
Modern LEDs (light emitting diodes) cover the range from deep blue (440 nm) to infra-red (940 nm). By monitoring the voltage at which each LED just begins to emit light a graph of energy input as a function of light emitted frequency can be plotted and an approximate value of Planck’s constant deduced. Complete with viewing tube but without power supply.
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
TMS320C6713 Based DSP Trainer
KEY FEATURES:
• Highest performance floating point Digital signal processor (DSP) • 150 MHz Clock rates • 6.7ns Instruction cycle time • 16 bit external memory interface (EMIF) • 16 bit Host-port interface (HPI) • Two multichannel Audio serial ports (MCASPs) • Two multichannel Buffered serial ports (MCBSPs) • Inter integrated circuit (I2C) ModuleONCHIP MEMORY:
• 4KB L1P Program cache memory • 4KB L1D data cache memory • 256KB L2 unifies cache mapped RAMON BOARD FEATURES:
• 512Kx 8bit FLASH for monitor Program • 4M x 16 bit SDRAM for External Memory. • 8 way DIP switches & LEDs to user interface • LCD interface, I2C RTC • Stepper motor Interface • On board USB and UART for serial communication • PCM3002 Audio codecXTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Power Supply, 2 V
Table Counter Suitable for 100 tablet
Tissues Histology
| Animal Cell WM | Muscles Striated or Voluntary WM |
| Muscles Unstriated or Smooth WM | Muscles Cardiac TS |
| Muscles Smooth LS | Muscles Bungle TS |
| Epithelium Squamous | Epithelium Columner |
| Epithelium Ciliated | Epithelium Glandular |
| Epithelium Sensory | Epithelium Striated |
| Epithelium Pigmented | Cartilage Elastic |
| Cartilage Elastic | Cartilage Fibrous Cartilage Hyaline |
| Lymph Gland TS | Glblet Cells |
| Transitional Epithelium | Medullated Nerve TS |
| Non Medullated Nerve TS | Vein, artery and Nerve on same slide |
| Nerve Fibers | Nerve Cells TS |
| Yolk Gland TS | Tissue Connective |
| Tissue Areolar | Tissue Adipose |
| Tandon TS | Mucos Tissue |
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Ultrasonic Interferometer
Ultrasonic Interferometer is a simple and easy to use unit for the accurate measurement of ultrasonic velocity in a Liquids and Liquid systems at the desired temperature (and at desired frequencies).
FEATURES:
• Accuracy in wavelength measurement – 0.01mm • Digital Panel Meter ( DPM) for observing the change in the reading between nodes /anti nodes (75mV approximate between a node and anti node) • Easy replacement of transducers with other frequency • Only one Liquid cell is required for all frequencies • Built in IC regulated power supplies. • The frequency of the Crystal oscillator at the piezo electric transducer is so matched at the 3 digit Decimal accuracy • The accuracy of Meter is 3 Digit Decimal • Stainless Steel based mechanical setup.ACCESSORIES:
• Liquid cell - One (with provision for water circulation) • Transducer (Longitudinal, 2MHz) - One • Micrometer assembly - One (with Tx)
Transformer Stand and Core
Description
Apparatus is designed primarily for demonstration of the basic principles of transformers. It consists of a laminated U-core with laminated I-core, both with 32 x 25 mm cross section to form a closed core of size 102 x 127 mm. Heavy aluminium alloy stand with removable clamping rods, 2 pole pieces, each 65 x 30 x 25 mm with one end cone shaped, to accept support rod and shading ring. Poles also have a hole drilled through lengthwise to take a light beam. 300 turns 600 turns 1200 turns 3600 turns 12000 turns
2 Stroke Petrol Engine Sectional Working Model
Calorimeter, Electric
XTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Insect Cage
Description
Aluminium angle framework supported on wooden batons. Fine mesh provided on slide and top. Hinged door provided on side or top. Hinged door provided with clips for tight closing. Wooden bottom covered with sunmica from inside. Size 15x15x15cm. Size 20x15x15cm. Size 25x20x20cm. Size 20x20x20cm.Folding Type
Size 30x30x45cm.
Magnetic field demo, vertical wire
Power Supply for Electrophoresis
Fully Automatic Battery Charger
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
Horizontal Laminar Air Flow
Specifications
We deal in of horizontal laminar air flow that finds it applications in various hospitals, electronic industry and others. We use high grade component and quality raw material that is tested on various quality parameters and ensure smooth functionality. Direction of flow: Horizontal. Cleanliness: CLASS 100. Velocity: 90 FPM + / -20%. Hepa Filter: Size and QTY. will depend on the Size selected. Particle retention: Above 0. 3 micron. Blower Assembly: 1 / 3 HP, 1440 RPM. Noise level: 65 decibel + / -5%. Rate of air flow: 0. 40 to 0. 75 M / Sec. (90 FPM). Vibration level: < 2. 5 micron.Sizes mm.
60x60x60 90x60x60 120x60x60
Primary and Secondary Coil
Description
The apparatus demonstrates the principle of Electromagnetic Induction and helps explain the concept of a transformer. Primary and Secondary coil consist of coils mounted on plastic spools, with 2 binding posts on each coil. You can slide the primary coil inside the secondary coil. Also includes a soft iron core for induction experiments. Primary coil has 480 turns while secondary coil has 3800 turns. Requires a galvanometer and bar magnets, not supplied with apparatus.
Rack Pinion Type Steering System
Rack & Pinion Type Steering System – Actual Working
The working of steering system is shown with the help of actual parts assembled on square iron pipe frame. All the necessary parts of steering system are shown in actual working form. This model helps the student to understand the working of the steering system very easily. It is specially made dissectible for demonstration purposes.
