XTEMOS ELEMENT
AJAX PRODUCTS TABS
8085 Microprocessor LC LCD Trainer
Specification
• Intel 8085A CPU @ 6.144 MHz Clock speed. • RAM : 8KB expandable upto 32KB, Jumper selectable. • EPROM : 8KB expandable upto 32KB, Jumper selectable. • Lithium Battery Back up for RAM • PC Keyboard (104Keys) • 16x2 Alphanumeric Dot Matrix Liquid crystal display with back light • 3 Channel 16 Bit counter / timer terminated in a 10 pin connector using 8253 • 24/22 TTL I/O lines, terminated at 1 No of 26-Pin FRC connector by using 1 No of 8255/1No 8155 respectively • 8 Nos of Digital inputs terminated and given through on board 8 way Dip switch • 8 Nos of Digital outputs are terminated and displayed in the 8 Nos of SMD type LEDs • Digital I/O lines are terminated in 20-Pin connector • RS 232C compatible Serial port terminated in a 9-pin 'D' male connector • One VXT-Bus (50-Pin FRC Connector) for interfacing VBMB series of experiment boards for bus expansion. • Interrupts are terminated in a 5-Pin connector • Built in Line Assembler and Disassembler provided. • Software single stepping of user programs by instruction for software debugging.
Analytical Funnel
Our exclusive Analytical Funnel is designed specifically for analytical chemistry; the body of the Analytical Funnel is 60".
Moulded in polypropylene, these Analytical Funnel is provided with internal & external ribs to prevent air blockage.
We offer our Analytical Funnel at market leading prices.
Material : Polypropylene
| Particulars | Pack (Pcs) | |
|---|---|---|
| Analytical Funnel 35 mm | 72 | |
| Analytical Funnel 50 mm | 72 | |
| Analytical Funnel 62 mm | 36 | |
| Analytical Funnel 75 mm | 36 | |
| Analytical Funnel 100 mm | 36 |
Geographical Terms
XTEMOS ELEMENT
AJAX PRODUCTS TABS SIMPLE
Resistance Coils
AED Trainer
Description
The Laerdal AED Trainer 2 offers an affordable alternative for educating the layperson and healthcare provider in the effective use of an automated external defibrillator.Product benefits:
Educationally effective, offers all the essential features necessary for learning appropriate AED use and techniques. Affordable training through the simulation of the HeartStart FR2 AED in appearance and operation. Added instructor flexibility through unique control of the scenario selection by use of the remote control device. Flexible configuration of the device through a scenario builder program that allows the additional creation of custom training scenarios. Cost-effective operation through use of six C-cell batteries.Product features:
Ten pre-configured sudden cardiac arrest scenarios compatible with training programs developed by internationally recognized responder programs. Remote control (optional) for manual scenario selection pause/resume function, AED Trainer 2 volume control, motion artefact, low battery or replace battery, loose electrodes connection, shock able or non-shock able rhythms and error conditions that simulate the red X in the Heart Start FR2’s status display window. Designed for use with the AED Little Anne® and AED Resusci Anne® manikins with Laerdal LINK Technology by providing student feedback as to proper pad placement on the manikins. It can also be used with any other manikin where Laerdal Link Technology is not available. Proper pad placement required in order for the trainer to advance in the scenarios when used with the AED Little Anne or AED Resusci Anne manikins.
LPC 2148 Evaluation Board
ON Chip Features
• CPU - LPC2148. • Core - 16/32 Bit ARM7TDMI-S. • Speed - Max 60 MHZ. • Flash - 512KB. • RAM (on-chip) - 40KB. • 46 x General Purpose I/O Pins. • USB2.0 Full speed Compliant Device. • One 10bit ADC with 14 Analog inputs. • One 10bit D/A Converter. • Two 32bit Timers/ External Event Counters. • Low Power Real Time Clock. • Six PWM, Watchdog. • Two UARTS (16c550). • Two Fast I2C (400Kb/s) Module.ON Board Features
• Eight Digital Output - LED Interface. • Two Digital Input. • 16 x 2 Character LCD Interface. • 7 Segment Display via I2C Interface. • 10 Base T Ethernet Connectivity. • SD Card Interface Support. • Audio Interface. • Jtag connector is provided for Debugger. • USB to serial interface provided.XTEMOS ELEMENT
AJAX PRODUCTS TABS ALTERNATIVE
Fashion
Four Stroke Petrol Engine Model
Description
Represents internal structure and operating principles of an air cooled two-stroke engine. All parts in aluminium alloy. Ignition is shown by means of a miniature bulb. Carburetter and fuel supply also sectioned. Mounted on base with printed diagram showing working. Two-Stroke Petrol Engine Four-Stroke Petrol Engine are also available.
Test Tube Stand of 6 Holes, Wooden
Description
With vertical pins:
Wooden, polished stand with drilled holes, 2 of 25 mm dia. and 4 of 20 mm to accommodate 6 tubes with overall height of 9 cm and length of 20 cm. Vertical pins are provided for quick drying of the test tubes. Also available for 12 tubes, with 2 holes of 25 mm dia and 10 holes of 20 mm dia.Specifications :
Length : (in) 9.4 Width : (in) 3.5Without vertical pins and moulded supports:
Wooden with base and top with single row of 6 holes, clips together quickly and easily with two moulded supports. Height 11cm can accept two tubes of 30 mm and four tubes of 20mm diaSpecifications:
Length: (in)11.8 Width: (in)10.2Without vertical pins:
Wooden test tube stand - 6 holes of 22 mm dia. Test stand measures 9.5" long 2.5" wide base and 4.5" tall (Test tubes not included - shown for demostration )Specifications :
Weight: (lb)0.9 Length: (in)10.0
Skeleton Model, Miniature
XTEMOS ELEMENT
AJAX PRODUCTS TABS ARROWS PAGINATION
Hand & Table Microtome
The Hand & Table Microtome is used to cut thin sections of Microscopic materials, such as specimen parts of plants and animals.
It is Considered as the basic form of a microtome permitting microtomic cuts by hand in a quick and accurate way.
The microtome is suitable for practical courses in microscopy, for field work during excursions, for school education and for a serious amateur of biology.
Optech Scanner
Description
Optech ILRIS Laser Scanner is fully portable, laser based ranging and imaging system for the commercial survey, engineering, mining and industrial markets. A compact and highly integrated instrument with digital instrument with digital image capture and sophisticated software tools, ILRIS is an industrial leading solution that addresses the needs of commercial users.
Pisces
Description
All Charts are made on PVC rexine, hand drawn, waterproof, in fast multi colors with a black background. Each chart is provided with rollers to hang on wall. Size 75×100 cm. Scoliodon External Character Scoliodon General Viscera Scoliodon Digestive System Scoliodon Skeleton Scoliodon Male Urinogenital system Scoliodon Female Urinogenital system Scoliodon Venous system Scoliodon Cranial Nervous system Scoliodon Recepter organs Labeo Rohita External character Labeo Rohita Axial Skeleton Amphioxus External character Amphioxus General anatomy Amphioxus T.S. through different regions Amphioxus Development Amphioxus Excretory systemXTEMOS ELEMENT
AJAX PRODUCTS TABS WITH ICONS
Dicot & Monocot Stem
Achyranthus Stem TS
Begonia Stem TS
Bougainvillia Stem TS
Calotropis Stem TS
Casurina Stem TS
Cucurbita Young Stem TS
Cucurbita Old Stem TS
Cucurbita Stem LS
Cusuta with Host TS
Dicot Stem LS and TS on Same Slide
Helianthus Young Stem TS
Helianthus Old Stem TS Helianthus Stem TS
Mirabilis Stem
Mublenbeckja Cladode TS
Asparagus TS
Dracaena Stem TS
Grass Stem TS
Hydrilla Stem TS
Maize Mature Stem TS
Maize Stem LS
Maize Stem TS and LS, on same slide
Triticum (Wheat) Stem TS
CNC Mill Trainer2
CONTROLLER:
Type of Controller System : PLC based system Main Spindle Drive : D.C. Thyristor Drive, Inbuilt Safety X, Y and Z axis Drives : Stepper motor drive Input to Stepper : Optically lsolated motor drive : TTL Compatible Runing Speed Control : Computer control with software Interpolation : Linear, Circular parabolic Interpolation Code Used : G, M, S, T, F, I, K, M, F, Cycles : Circular Interpolation, Mirror, Pocket Milling Cycle Pocket & Helical Milling : Provided Real time tool path : Provided simulationTABLE:
Length x Width : 450 x 175 (approx.) Clamping Area : 360 x 130 (approx.) T Slots : 10mm slot width.MACHINE DETAILS:
Resolution : 5 micron Distance from sindle : 700 mm/min Tool Change : Quick Change , Manual Centerline to column : 140mm Weight in kg : 550kg. Dimension in mm : 850 x 800 x 1630SPINDLE:
Spindle Speed : Continuous Variable Spindle power : 1HP Inside Taper : ISO 30 Speed Range : 300 to 3000 RPM
Mammal
XTEMOS ELEMENT
AJAX PRODUCTS TABS LOAD MORE PAGINATION
SILICA CRUCIBLE WITHOUT LID
PRODUCT DESCRIPTION
- Crucible is glazed inside and outside.
- Highly resistant to alkalis and hot temperatures
- 50ml capacity
- Outside diameter 55mm, 42mm height
- No lid includedSilica crucible is glazed inside and outside. Highly resistant to alkalis and hot temperature SIZES ARE: 15ML 25ML 50ML 80ML 100ML 150ML
SILICA CRUCIBLE TALL FORM Without Lid, Translucent
XTEMOS ELEMENT
AJAX PRODUCTS TABS CAROUSEL
